Conference azur::mcc

5620.0. "SNMP recording problem" by ADO75A::BOUCHER () Tue Sep 28 1993 07:40

Greetings all.

I have a customer with the following environment:

	VMS V5.5-2
	DECmcc V1.3.0
	VAXstation 4000 60 / 72 Mb RAM
	Large No of cisco routers	(5 x AGS+, 30 x IGS/3000)

I have placed all routers in the one domain and am cuyrrently recording the
"counters" partition at 1 Hr intervals, and exporting the data from the
previous day at 01:00 the next morning.

The problem I have is with some IGS/3000 routers.  The scenario of events is as
follows:

MCC>DELETE RECORDING SNMP * INTERFACE * PARTITION=COUNTERS, IN DOMAIN
EXPORT_DATA
	all exporting is stopped.

MCC>RECORD SNMP * INTERFACE * PARTITION=COUNTERS, POLLING PERIOD=01:00:00, KEEP
AGE=15, IN DOMAIN EXPORT_DATA
	recording starts int 1
	record starts int 2

MCC>DELETE RECORDING SNMP * INTERFACE * PARTITION=COUNTERS, IN DOMAIN
EXPORT_DATA
	int 1 recording stopped
	int 1 no recording for specified entity and partition !int 1 is not typo

MCC>SHOW RECORDING SNMP * INTERFACE 2 PARTITION=COUNTERS, IN DOMAIN EXPORT_DATA
	recording is active

MCC>DELETE RECORDING SNMP * INTERFACE 2 PARTITION=COUNTERS, IN DOMAIN
EXPORT_DATA
	recording deleted

This does not occur with the AGS+ routers, nor does it occur on all IGS/3000
routes.

The firmware version of 2 x 3000 routers that display different characteristics
is as follows:

	9.1(5)(fc2)

This is also causing some problems when trying to export data, in that it will
not recognise all interfaces.  Int 2 is the one that I am most concerned about,
as it is the serial connection on most IGS/3000 routers.

Help is appreciated.


Reece Boucher
Adelaide, Australia