[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:DECmcc user notes file. Does not replace IPMT.
Notice:Use IPMT for problems. Newsletter location in note 6187
Moderator:TAEC::BEROUD
Created:Mon Aug 21 1989
Last Modified:Wed Jun 04 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:6497
Total number of notes:27359

5598.0. "MCC-E-NOTFOUND unsupported ...." by PADNOM::PEYRACHE (Sarip Torppus Lanoiger) Fri Sep 17 1993 08:32


  hi,

 seems to be no possible to disable a Phy port on a Decbridg620 (DAS)
when you try , you received this kind of error message :

   %MCC-E-NOTFOUND unsupported combination of verb, entity, partition           
                                                       

  Nevertheless, this kind of action is totally supported on DAS station
(FDDI Data link Functional Specification chapter Network Management)

  thanks for any comments


  Regards

  Jean-Yves
T.RTitleUserPersonal
Name		DateLines
5598.1snmp is the answer ...PRSSOS::BONNAFEGuy BONNAFE - CSC FranceTue Sep 21 1993 03:4916

	I had it once. My guess is that ELM code ( and elms as well ) was
	written when only single attachment bridges were available and then
	disable/enable the line or the phy port had the same effect ...
	Maybe somebody can correct me if I'm wrong.

	Anyway, there is an easy workaround ( thanks JYP ). Bridge's phy port
	states are manageable through snmp. So you just have to compile the
	fddi mib, set an IP address to the bridge and you'll be able to 
	manage 'snmpFddiPORTAction' attribute.

	Guy.

	ps : la prochaine fois, �changeons des mails. Nous gagnerons du 
	     temps ... ;-)