[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:	DECmcc user notes file. Does not replace IPMT.
Notice:	Use IPMT for problems. Newsletter location in note 6187
Moderator:	TAEC::BEROUD

Created:	Mon Aug 21 1989
Last Modified:	Wed Jun 04 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	6497
Total number of notes:	27359

5514.0. ""too big" error w/DECmcc Ultrix" by DPDMAI::DAVIES (Mark, SCA Area Network Consultant) Fri Aug 20 1993 11:32

    I am getting the following error when attempting to use
    Autoconfiguration of DNA4 network.  I have requested all nodes in a
    single area.  This has worked in the past (yesterday), but today is
    doesn't and exits in an error state.  
    
    I am running DECmcc V1.3 on Ultrix V4.3.
    
    Any direction is appreaciated as to what have unknowingly done.
    
    Thanks,
    
    Mark
    
    
    
    
            DECnet Phase IV Autoconfiguration data collection completed.
    
            DECnet Phase IV Autoconfiguration starting data formatting ...
    sh5: /usr/mcc/mmexe/mcc_ac_wan4_mapper: too big
    
            DECnet Phase IV Autoconfiguration data formatting completed.
    
            DECnet Phase IV Autoconfiguration generating DECmcc
    Registration
            and Map files.
    
    sh5: /usr/mcc/mmexe/mcc_ac_map: too big
    
            DECnet Phase IV Autoconfiguration finished generating DECmcc
            Registration and Map files.
    
            Error:  Command procedure mcc_pivnodes_copy_maps.sh is missing.
                    DECmcc Map files will not be copied.
    
            DECnet Phase IV Autoconfiguration exiting under error
    conditions.
    
    o  Press RETURN to exit:

T.R Title User Personal
Name Date Lines

5514.1 memory problem TAEC::LAVILLAT Tue Aug 24 1993 10:34 16

T.R	Title	User	Personal Name	Date	Lines
5514.1	memory problem	TAEC::LAVILLAT		`Tue Aug 24 1993 10:34`	16
	Re .0: Mark, What you see is a very meaningful message from sh5 notifying you that your system ran out of memory. sh5 could not execute /usr/mcc/mmexe/mcc_ac_wan4_mapper because your system had not enough core to run it. Check your memory and swap usage or ask your system manager about this. Regards. Pierre.

Re .0:

  Mark,

  What you see is a very meaningful message from sh5 notifying you that
  your system ran out of memory.

  sh5 could not execute /usr/mcc/mmexe/mcc_ac_wan4_mapper because your
  system had not enough core to run it.

  Check your memory and swap usage or ask your system manager about this.

  Regards.

  Pierre.