| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
With the MCC a number of MIB files for Chipcom hubs are included. What
devices do these pertain to?
I ask this question because I have just walked into a site where a colleague
of mine has compiled chipcom_hub21_mibdef.txt followed by the
chipcom_hub30_mibdef.txt and then registered the
hub ok. However I only get the MIB 1 definitions returned. Now the
version of the EMM software is V2.(its quite old). Does the *HUB21* and
*Hub30* files refer to the version of EMM software?
Do I need to reinstal the *hub21* definitions?
John Davies
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 5442.1 | About EMM versions & related MIBs | ZTOIS1::VISTA | Renato VISTA, MCS/SPS France/Strasbourg | Fri Aug 06 1993 03:45 | 17 |
John,
*HUB21* refers to EMM V2.1, an old version.
*HUB30* refers to EMM V3.0. It also can be used for EMM V3.1 and V3.2
but TOKEN RING and FDDI modules are not seen correctly.
A last version of MIB, related to EMM 3.2, TRMM 2.0, OEBM 2.1 (ONline
Ethernet BRIDGE module) is available on CHNAPS:: (47.154) :
filename : CHNAPS::CHIPCOM_EMM32_TRMM20_OEBM21.TXT_NOMAC
I hope this will help you.
Renato
| |||||
| 5442.2 | BIKINI::KRAUSE | European NewProductEngineer for MCC | Fri Aug 06 1993 05:59 | 11 | |
> Does the *HUB21* and > *Hub30* files refer to the version of EMM software? YES. > Do I need to reinstal the *hub21* definitions? YES. If you want to keep both versions specify AUGMENT when asked by the procedure. *Robert | |||||
| 5442.3 | Thanks! | FILTON::DAVIESJ | Fri Aug 06 1993 07:26 | 3 | |
Many thanks for the quick reply
John Davies
| |||||