| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
Hi,
Trying to create a target from the IMPM with NODE4 <router_name> AREA
<some_number> as the entity source and managed object results in an
accvio. If you specify an "*" in place of <some_number> for the entity
source and then #1 for the same location in the managed object, then it
works. The area number specified is a valid area that the router does
see as reachable.
Has anyone else seen / reported this behavior?
Walt
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 5365.1 | Log of error from FCL attempt. | CSC32::W_MCGAW | Thu Jul 22 1993 19:37 | 35 | |
$ manage/enterprise DECmcc (V1.3.0) MCC> assign target domain walt event source = node4 shoto area 28, - _MCC> managed object "node4 shoto area 28", - _MCC> event name "area reachability change", - _MCC> target entity "reference 28", - _MCC> target severity major %SYSTEM-F-ACCVIO, access violation, reason mask=01, virtual address=20202020, PC=80000010, PSL=03C00004 Improperly handled condition, image exit forced. Signal arguments Stack contents Number = 00000005 80234240 Name = 0000000C 00000002 00000001 001989F4 20202020 001989DC 80000010 00000004 03C00004 00199140 00000000 03268009 00000001 05000001 Register dump R0 = 03C00000 R1 = 20202020 R2 = 20202020 R3 = 005E0598 R4 = 03268009 R5 = 00000003 R6 = 03268009 R7 = 03268009 R8 = 03268009 R9 = 00007100 R10= 00214DD0 R11= 00000000 AP = 00198990 FP = 00198950 SP = 001989CC PC = 80000010 PSL= 03C00004 $ | |||||
| 5365.2 | Should I just CLD this??? | CSC32::W_MCGAW | Tue Jul 27 1993 18:35 | 6 | |
Hi,
Can someone give me some assistance on this or should I just CLD this
problem.
Walt CSC/CS
| |||||