Conference azur::mcc

5346.0. "Error when registering DECnet Phase-IV node" by ZPOVC::INDO03::YINARTO () Fri Jul 16 1993 01:00

    
    I just installed POLYCENTER Network Manager 200 on VAXstation 4000-60,
    with specification as follows :
    - O.S    : Open VMS v5.5-2
    - DECnet/OSI v1.0 + DECdns server,DECdts server,no application
    - Memory : 40 MB
    - TS-AM 1.2 additional module
 
    The installation process was succeed, and also TS-AM module (I used
    IVP), after that I started DECMCC-BMS and TS-AM as follows :
    - $ @sys$startup:ucx$startup
    - $ @sys$startup:mcc_startup_bms
    - $ @sys$startup:mcc_ts_am_startup

    But, when I opened the iconic map, I got 2 problem :
    1. I couldn't find Terminal_Server icon in Tool Box window.
    2. I couldn't register DECnet-IV node. I got error messages :
        
       Internal error in DECnet Phase IV AM

    Questions :
    What should I do for question #1 & #2 ?

    The DECnet internal error is probably due to a bug in the
    SSB version of DECnet/OSI.  You need to install the DECnet/OSI
    mup, to get a new version of CML.EXE with a fix.  However, the
    MUP also has a packaging problem where it restores CML.EXE with the
    wrong protection so it never gets activated.  After the installation
    make sure you set the protection to W:RE.
    
    See note 4011.* for more info.

    Thanks for your help.
    
    Now, I can use DECmcc BMS, to manage Phase-IV node.
    By the way, I still can't manage terminal server from iconic map
    because there is no TERMINAL_SERVER icon in the Tool Box window 
    and still use TS-AM V1.0.0.
    
    Every respon will be appreciated
    
    
    
    Thanks,...