[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:	DECmcc user notes file. Does not replace IPMT.
Notice:	Use IPMT for problems. Newsletter location in note 6187
Moderator:	TAEC::BEROUD

Created:	Mon Aug 21 1989
Last Modified:	Wed Jun 04 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	6497
Total number of notes:	27359

5152.0. "Fibronics UNIMUX V hubs management" by ISIDRO::REJON (FRANCISCO REJ�N @SQO EIS-IS) Mon Jun 07 1993 05:45

    Hi,
    
    	 I need some information about experiences with SNMP management of 
    Fibronics UNIMUX V hubs with NM892.126 (SNMP Proxy agent card). I don't 
    know a lot of Fibronics products but I need to manage a set of hubs 
    from a DECmcc V1.3 station.
    
    Is it possible full configuration capabilities of hub modules ?
    
    Can I show all the information on hub modules?
    
    Is it reliable?
    
    What MIB files do I need to load in the mcc dictionary?
    
    
    Thanks in advance for any help.
    
    
    	      	   	     	       	    	 Francisco Rej�n
    	      	   	     	       	    	 DS/NS Spain.

T.R Title User Personal
Name Date Lines

5152.1 FRAIS::ORCHIS::MAASS Information, that's all I need... Fri Jun 18 1993 19:15 23

T.R	Title	User	Personal Name	Date	Lines
5152.1		FRAIS::ORCHIS::MAASS	Information, that's all I need...	`Fri Jun 18 1993 19:15`	23
	Hi Francisco, the information you can get from the hub solely depends on what is defined in the Fibronics MIB. If they only have defined, say, software version, you only can get the software version of the hub. The same is true for modifications (e.g. some MIBs only allow a SHOW, not a SET). Depending on the quality of the DECmcc and hub installation, the management solu- tion should be stable :-). Again, this depends largely on the quality of the MIB definition and agent implementation in the hub. For a copy of the MIB, try to kick Fibronics :-) or do a $ dir mcc_common:mcc*mibdef.txt. If you find a Fibronics MIB, load it and see. Kind regards Josch

Hi Francisco,

the information you can get from the hub solely depends on what is defined in the
Fibronics MIB. If they only have defined, say, software version, you only can get
the software version of the hub. The same is true for modifications (e.g. some
MIBs only allow a SHOW, not a SET).

Depending on the quality of the DECmcc and hub installation, the management solu-
tion should be stable :-). Again, this depends largely on the quality of the MIB
definition and agent implementation in the hub.

For a copy of the MIB, try to kick Fibronics :-) or do a 

$ dir mcc_common:mcc*mibdef.txt.

If you find a Fibronics MIB, load it and see.


Kind regards



Josch