| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
Are there any firmware level restrictions for lanbridge 150 and the
bridge AM.
I have a customer who has two problems with Bridge AM 1.3:-
1. A "show bridge Bridge_name all status" on one bridge gives "device
broken - operational Firmware failure"
I,ve looked in the spd etc but can't find any mention of minimum
firmware levels for lanbridge 150. The bridge has S/W version 1.3 and
rev d01.
Can anyone suggest an explanation?
2. Another lanbridge 150 registration fails with "communication with
the target has been interupted".
A test bridge is successful - the rev on this one is E101.
Any help appreciated,
Regards,
Jon
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 5044.1 | Will look into it | QUIVER::HAROKOPUS | Thu May 13 1993 12:00 | 5 | |
I'm not sure if there are any firmware restrictions with the
LANbridge 150, but I'll send your note to the product maintaininer.
-Bob
| |||||
| 5044.2 | Firmware resolved - Registration? | KERNEL::WARDJO | Thu May 13 1993 12:47 | 15 | |
Bob,
Thanks for the response,
I think I've resolved the firmware problem - there is an upgrade but
the situation should not effect the operation of the bridge.
Can anyone explain what would cause the registration failure - The
customer disconnected the registered bridge and they could then
register the other bridge.
Seems odd to me.
Jon
| |||||
| 5044.3 | solution | BEANO::WARDJ | Fri May 14 1993 09:31 | 5 | |
Problem turned out to be a faulty h4000.
Jon
| |||||