Conference azur::mcc

5009.0. "DECmcc process crash" by HGOSPS::DENISLI () Thu May 06 1993 00:56

    VAXstation 3100, Physical memory 20M bytes
    VMS 5.5-2
    DECmcc EMS 2.2
    
    Maybe it is not an appropriate machine to run DECmcc but I have no
    other choice.
    
    I have encountered two process crash but cannot find any process dump
    in sys$login.  My questions are,
    
    	1. Is there any process dump?
    	2. Do I miss any patch or important setting?
    
    The exception messages and UAF are as attached.
    
    Thanks and regards,
    Dennis.
    
    ----------------------------------------------------------------------
    
    Crash 1
    -------
    %CMA-F-EXCCOP, exception raised; VMS condition code follows
    -SYSTEM-F-ROPRAND, reserved operand fault at PC=00048D22, PSL=03C00001
    %TRACE-F-TRACEBACK, symbolic stack dump follows
    module name     routine name        line       rel PC    abs PC
    
                                                   0004B2C4  0004B2C4
                                                   0007C182  0007C182
                                                   00076FDC  00076FDC
                                                   0007A678  0007A678
    
    Crash 2
    -------
    Command resource 'mcc_pml.applications.DECmcc Reports.vms_command' for
    applicatd
    %CMA-F-EXCCOP, exception raised; VMS condition code follows
    -SYSTEM-F-ACCVIO, access violation, reason mask=04, virtual
    address=00E99400, P0
    %TRACE-F-TRACEBACK, symbolic stack dump follows
    module name     routine name        line       rel PC    abs PC
                                                   0004B2C4  0004B2C4
                                                   0007C182  0007C182
                                                   00076FDC  00076FDC
                                                   0007A678  0007A678
    
    
    UAF
    ---
    Username: MCCMGR                   Owner:  MCC MANAGER
    Account:  MCCMGR                   UIC:    [1,100] ([SYSTEM,MCCMGR])
    CLI:      DCL                      Tables: DCLTABLES
    Default:  SYS$SYSROOT:[MCCMGR]
    LGICMD:   LOGIN
    Flags:  DisPwdHis
    Primary days:   Mon Tue Wed Thu Fri
    Secondary days:                     Sat Sun
    No access restrictions
    Expiration:            (none)    Pwdminimum:  8   Login Fails:     0
    Pwdlifetime:         30 00:00    Pwdchange:   5-MAY-1992 10:32
    Last Login:  5-MAY-1992 10:32 (interactive),            (none)
    (non-interacti)
    Maxjobs:         0  Fillm:       150  Bytlm:        64000
    Maxacctjobs:     0  Shrfillm:      0  Pbytlm:           0
    Maxdetach:       0  BIOlm:        75  JTquota:       1024
    Prclm:          20  DIOlm:       200  WSdef:         3000
    Prio:            4  ASTlm:        48  WSquo:        15000
    Queprio:         0  TQElm:       150  WSextent:     20000
    CPU:        (none)  Enqlm:      2000  Pgflquo:     100000
    
    Authorized Privileges:
      CMKRNL CMEXEC SYSNAM GRPNAM ALLSPOOL DETACH DIAGNOSE LOG_IO
      GROUP ACNT PRMCEB PRMMBX PSWAPM ALTPRI SETPRV TMPMBX WORLD
      OPER EXQUOTA NETMBX VOLPRO PHY_IO BUGCHK PRMGBL SYSGBL MOUNT
      PFNMAP SHMEM SYSPRV BYPASS SYSLCK SHARE GRPPRV READALL
      SECURITY
    Default Privileges:
      CMKRNL CMEXEC SYSNAM GRPNAM ALLSPOOL DETACH DIAGNOSE LOG_IO
      GROUP ACNT PRMCEB PRMMBX PSWAPM ALTPRI SETPRV TMPMBX WORLD
      OPER EXQUOTA NETMBX VOLPRO PHY_IO BUGCHK PRMGBL SYSGBL MOUNT
      PFNMAP SHMEM SYSPRV BYPASS SYSLCK SHARE GRPPRV READALL
      SECURITY
    

You might try upgrading to Polycenter 400 V2.3 (aka EMV V2.3),
which is the current version.  However, that would not relax any of
the resource requirements.

Someone may have a chance to see if something stands out in this information,
but we really do not have the engineering resources available to spend
time debugging problems on an unsupported platform.

--  Erik

    $ SHOW PROC/CONT find the process crashes when the working set
    increases near to 15,000 blocks.  The SYSGEN parameter WSMAX is found
    to be 16,000 block.  The problem does not show up again after
    increasing WSMAX to 40,000 block.
    
    Dennis.

    also post what your pagefile size is set at (show mem)