| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
Pardon me if I'm out of line here...but the Wellfleet MIB 3.1b v 5.70
seems useless.
Half of the entities/variables are for appletalk protocols and
nothing seems pertinent to IP statistics.
My customer's wellfleet has 16 circuits/interfaces on it and they
want to be able to monitor the IP traffic on the INDIVIDUAL
interfaces.
Though MCC can monitor the total utilization/total traffic on each
particular circuit (Boy they love those Graphs! ;-) ), I can't seem
to be able to get down to specific types of traffic.
So you would think that through the MIB you could get it...but there
doesn't seem to be much functionality with it...
Is there a newer MIB??
Also, in looking through the Wellfleet Operator's Guide..there are
tons of variables specified on IP. So is it because they don't
give the rest of the world access to these variables...or am I
going about this all wrong??
Also..is there anyway to do SNMP "GETS" from mcc???
This customer also wants to manage their fiber modules on their
Chipcom Hub...I've installed MIB spec. 1.39...
Through variable 0l151nnMFIBPortTable....bla bla bla I can get if the
Fiber Module is enabled or not...but that's just a mgmt function...he
wants to manage if each fiber port is up or down.
Is this possible???
Sorry for the many different questions..but I'm still learning my
way around a lot of this stuff.
- Rob
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 4770.1 | About CHIPCOM... | ZTOIS1::VISTA | Renato VISTA, SIS Strasbourg, France | Fri Mar 26 1993 02:52 | 99 |
Rob,
About CHIPCOM and management capabilities VIA SNMP AM with private MIB,
all what is possible to do via CONSOLE/RS232 mode IS ABLE to be done
from DECmcc (expect IP address assignment & community declaratives).
About your accurate question concerning the monitoring of 5104M-FIB
modules, you can information via TWO ways (ie subtrees of MIB) :
. FIRST one, you can use systematically the following command to obtain
the total configuration about...
... modules, ie
MCC>show snmp <hub> chipcom chipmib02 olmodtable * all attributes
... ports of modules, ie
MCC>show snmp <hub> chipcom chipmib02 olporttable * all attributes
In this last command, you will show STATUS information for (slot,port)
instances (with clear other data...) ; Some attributes are ALSO
SETtable at this point of subtree.
When determining the TYPE (ie olmodType of olmodtable instance), you
can use, as SECOND step, the module-type-dependant subtree, ie
51nnMFIBPortTable (slot,port) instance, to do other configuration &
control command (show & set operations).
Example :
show snmp etoile1 CHIPCOM CHIPMIB02 OLMODTABLE 4 all attr
SNMP etoile1 chipcom chipmib02 olModTable 4
AT 26-MAR-1993 08:49:17 All Attributes
olModSlotIndex = 4
olModStatus = okay
olModType = module_51nnM_FIB
olModClass = ethernet_media
olModDescr = "5104M-FIB: ONline Ethernet
Synchronous Fiber Module"
olModVersion = "002"
olModVendor = chipcom
olModResetModule = noReset
olModConfigToDips = noConfigure
olModConfigured = configured
olModNetwork = ethernet_1
olModNetworkType = ethernet
olModNumPorts = 4
olModNumTrunks = 0
show snmp etoile1 CHIPCOM CHIPMIB02 OLporttable (4,1) all attr
SNMP etoile1 chipcom chipmib02 olPortTable (4,1)
AT 26-MAR-1993 08:50:21 All Attributes
olPortTable_Index = ( 4,
1 )
olPortStatus = linkFailure
olPortSlotIndex = 4
olPortIndex = 1
olPortType = media
olPortConnector = fiber
olPortAdminState = enabled
olPortNetwork = per_module
olPortNetworkType = ethernet
show snmp etoile1 CHIPCOM CHIPMIB02 OL51NNMFIBMODTABLE 4 all attr
SNMP etoile1 chipcom chipmib02 ol51nnMFIBModTable 4
AT 26-MAR-1993 08:50:42 All Attributes
ol51nnMFIBModSlotIndex = 4
ol51nnMFIBModDipNetwork = ethernet_1
ol51nnMFIBModLLW = disabled
ol51nnMFIBModDipLLW = disabled
show snmp etoile1 CHIPCOM CHIPMIB02 OL51NNMFIBPORTTABLE (4,1) all attr
SNMP etoile1 chipcom chipmib02 ol51nnMFIBPortTable (4,1)
AT 26-MAR-1993 08:51:05 All Attributes
ol51nnMFIBPortTable_Index = ( 4,
1 )
ol51nnMFIBPortDipAdminState = enabled
ol51nnMFIBPortSlotIndex = 4
ol51nnMFIBPortIndex = 1
ol51nnMFIBPortAdminState = enabled
ol51nnMFIBPortBuddySlot = 1
ol51nnMFIBPortBuddyPort = 1
Hope this help you.
Renato
| |||||
| 4770.2 | RACER::dave | Ahh, but fortunately, I have the key to escape reality. | Fri Mar 26 1993 08:00 | 18 | |
The MIB's are not produced by DEC, we just provide copies of MIBs that are made public by other vendors. We do this as a free service, so our customers dont have to spend weeks chasing down the various MIBS that they need and then spend days fixing the typos and bugs that are in them. (Yes, lots of vendors ship MIBs with errors in them.) If you still think the Wellfleet MIB is useless, then complain to the folks at Wellfleet who developed it. It reflects the features they (Wellfleet) deceided to provide, and one cannot "extend it" if you dont like it. Thats whats there, no more, no less. Is there a newer MIB? Maybe, ask Wellfleet. Is there a way to do "GETS"? Yes, its the SHOW command, same as in the rest of MCC. | |||||
| 4770.3 | Thanks, Renato. | SPANKY::SAWYER | Fri Mar 26 1993 18:04 | 7 | |
Re: .1
Thanks for the help, Renato.
Much Appreciated.
Rob
| |||||