Conference azur::mcc

4713.0. "CMA-F-EXCCOP, enabling rule dieds..." by MLNCSC::BARILARO () Thu Mar 18 1993 03:57

    Hi,
    	Vaxstation 4000/60, 72 MB memory
    	VMS 5.5-2
    	MOTIF v1.1
    	MCC v 1.2
    
    	A customer of ours (the same of TSAM hanging process) has a problem
    	on the batches that enable the alarm rules, randomly they die with
    	the message:
    %CMA-F-EXCCOP, exception raised; VMS condition code follows
    -SYSTEM-F-ACCVIO, access violation, reason mask=04, virtual
    address=00000180, PC=000C052F, PSL=03C00000
    
    	I suggested him to divide the enabling on more than one batch,
    	creating one batch for every domains, but they still die. It 
    	seems that the batch that die the most it's the process that
    	enable the rules for the principal domain (the backbone) that
    	contains more entities than the other (Bridge, snmp, node4,
    	terminal servers), but died also batches for domains that 
    	contains few entities and few rules.
    
    	The MCC_AUDIT.COM runs fine as the log file :
    MCC_AUDIT X1.2.21  18-MAR-1993 09:52:04.27,
              on node ALMANS::, a VAXstation 4000-60, running VMS V5.5-2
     Checking Process Quotas
     - No process quotas found to be too small for user SYSTEM
     Checking Sysgen Parameters.
     - No Active Sysgen parameters found to be too small.
     Checking installed images
     Checking Disk Space
      MCC_COMMON:
      SYS$LOGIN:
      SYS$SYSDEVICE:
     Checking Memory
     Checking Pagefile Size
     Checking DNS Client Version
    Audit Complete
    
    	I checked the notes file and I found only one topic similar to 
    	my problem (# 3329) with a QAR #3263, but there isn't answer to
    	that.
    
    			Any helps very very appreciate,
    				Ciao	Luciano Barilaro
    
    
    	

    Hi,
    
    	The problem is still present, the temporary workaround the customer
    	has implemented (a command file that check the existence of the
    	batches that enable the rules, one for each domain) don't satisfied
    	him, he really need (want) an answer....
    
    	I tried to install the VPA to find out performance problems, now
    	I use 2 pagefiles for a total of 450.000 blks, VPA and Autogen
    	don't signal nothing... the same MCC_AUDIT naturally....
    
    	Nobody could address me in the right way ?????
    
    					Thanks in advance,
    					Ciao Luciano