| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
I'm having a problem using the MCC_ALARMS_EXTRACT_RULES.EXE; file.
When I run it I get the following error:
$run MCC_ALARMS_EXTRACT_RULES.EXE;5
MCC_ALARMS_EXTRACT_RULES - V1.2.0
- Generating a Procedure to Rebuild the DECmcc Alarms MIR
- Output File: mcc_alarms_rules.com
Working..
2 Rules processed.
>>> EXIT - Alarms MIR extraction error ... MCC Status Code = 52875002
$
I used to work fine when I had only twenty or so alarm rules. Now I
have upwords of 500 and it keeps giving me this error. I have DECmcc
at V1.2.3 and the system is at VMS V5.5. Any Ideas?
Thanks,
Dave Power
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 4388.1 | MCC Status Code = 52875002 is MCC_S_INSUFBUFFER | MOLAR::ROBERTS | Keith Roberts - Network Management Applications | Thu Jan 14 1993 16:05 | 6 |
I suspect that there is a *large* alarm rule, say one with a lot of description and category, etc... The Extract Rule tool probably doesn't expect such a large buffer (read: this is a bug) and exiting. Can you QAR this problem? /keith | |||||
| 4388.2 | The fix will be in DECmcc V1.3 SSB | TOOK::KWAK | Wed Jan 27 1993 15:20 | 12 | |
RE .1 is correct.
The problem is that the rule had a large characteristic attribute
partition, and the maximum size of the buffer used in the
MCC_ALARMS_EXTRACT_RULE.EXE was 1024 bytes.
The buffer size was increased to 2048 to fix the problem, and
the fix has been tested by Dave Power (in .0).
The fix will be available in DECmcc V1.3 SSB.
William
| |||||