Title: | DECmcc user notes file. Does not replace IPMT. |
Notice: | Use IPMT for problems. Newsletter location in note 6187 |
Moderator: | TAEC::BEROUD |
Created: | Mon Aug 21 1989 |
Last Modified: | Wed Jun 04 1997 |
Last Successful Update: | Fri Jun 06 1997 |
Number of topics: | 6497 |
Total number of notes: | 27359 |
************************************************************ * * * DECmcc Extended LAN Manager AM * * V1.2 * * * * Installation Procedure * * * ************************************************************ Checking for proper DECmcc version... DECmcc (T1.3.0) ************************************************************ * * * DECmcc V1.2 could not be found on this system. * * * * You must install V1.2 of DECmcc BMS or DECmcc * * Director before installing DECmcc ELM AM V1.2. * * * ************************************************************ I cannot re-install the ELAN AM onto T1.3. I cannot see anything in the release notes. Is there a more uptodate vmsinstal procedure that checks for either 1.2 or 1.3? Cheers Ian
T.R | Title | User | Personal Name | Date | Lines |
---|---|---|---|---|---|
4198.1 | Simple edit. | FARMS::LYONS | Ahh, but fortunately, I have the key to escape reality. | Fri Dec 04 1992 17:34 | 3 |
So, patch the Kitinstal procedure. Either build a custom kit with no version check, or check for 1.2 or 1.3. | |||||
4198.2 | But watch out for the map | TOOK::MINTZ | Erik Mintz | Sun Dec 06 1992 19:55 | 13 |
As far as I know, there are two problems with installing the ELM kit on T1.3 The first, as Dave indicates, is purely an installation procedure problem. In fact, the V1.2 and T1.3 kernels will interoperate without problems, so most of the ELM kit will work. The second problem effects only the ELM topology application. Unfortunately, that application is coded against DECwindows libraries, and will not run with the T1.3 Motif based iconic map. -- Erik | |||||
4198.3 | ONTIME::BUGSBY::COBB | Writing from ALPHA AXP | Mon Dec 07 1992 07:58 | 9 | |
Does the old BRIDGE AM (1.2) work with 1.3 or is there a new BRIDGE AM kit that is specifically for 1.3? The installation guide and release notes were not clear on this. Thanks, Bill |