Conference azur::mcc

4066.0. "BMS V������" by HAZARD::BAKER (Paul Baker, UK Product and Technology Group - 844 3311) Wed Nov 11 1992 08:22

I have just attempted to install BMS V1.2.3 on VS3100 M38 with 24Mb memory,
1 x RZ56 and 1 x RZ23L, running VMS V5.5. As can be seen from the attached log,
it has a lot of optional AMs installed.

Unfortunately the installation failed as shown in the log. Does anyone have any
ideas - this is urgent.

Is there any easy way to recover from this situation?

Paul.

.
.
.
   Upgrading the DECmcc Dictionary ...

%DAP-S-USE_DICT, Using dictionary file: uvdem2$dkb0:[sys0.sysupd.mccbms012]mcc_f
dictionary.dat;4

        DECmcc Dictionary Administrator Program   Version V1.2.1

DAP>  use class node subclass DDCMP
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass CSMACD
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass HDLC
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass ROUTING
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass X25PROTOCOL
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass NSP
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass OSITRANSPORT
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass SESSIONCONTROL
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass DNSCLERK
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass DTSS
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass MODEMCONNECT
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass EVENTDISPATCHER
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass LOOPBACKAPPLICATION
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass MOP
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass DEVICE
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass FRAME
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass X25SERVER
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass X25ACCESS
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass X25CLIENT
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass LAPB
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass DNSSERVER
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass LLC2
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass ALIAS
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass DSA
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass GENERICCLIENT
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass FDDI
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass DUA
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass BRIDGE
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass UDP
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass SNMP
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass FRBS
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass MTA
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass HARDWARE
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass X25RELAY
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass WANDD
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass CHANNEL
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass SNAACCESSSERVER
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass SNASSCPSERVICES
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass SNAPUSERVICES
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass SNALUSERVICES
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass OSAK
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass OUTPUT
DAP>  set definition code 10 type bu count 1 length 1 value 0
DAP>  use class node subclass TEST
DAP>  set definition code 10 type bu count 1 length 1 value 0

   Applying Patch to VMS V5.4 through V5.5-1 VAXCRTL
   Run Time Library

%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-ECOSET, eco level 3 already set in VMI$ROOT:[SYSLIB]VAXCRTL.EXE;2
%VMSINSTAL-W-NOFILE, New file VAXCRTL.EXE  does not exist.

... lines removed...

   Deleting obsolete DECmcc verbs...



The MCC_STARTUP_BMS startup procedure for DECmcc V1.2.3 is now running.

DECmcc (V1.2.3)

%MCC-I-ENRDUPLENTRY, enrollment successful; duplicate entries found and replaced
%MCC-I-ENRDUPLENTRY, enrollment successful; duplicate entries found and replaced
%MCC-I-ENRDUPLENTRY, enrollment successful; duplicate entries found and replaced
%MCC-I-ENRDUPLENTRY, enrollment successful; duplicate entries found and replaced
%MCC-I-ENRDUPLENTRY, enrollment successful; duplicate entries found and replaced
%MCC-I-ENRDUPLENTRY, enrollment successful; duplicate entries found and replaced
%MCC-I-ENRDUPLENTRY, enrollment successful; duplicate entries found and replaced
%MCC-I-ENRDUPLENTRY, enrollment successful; duplicate entries found and replaced
%MCC-I-ENRDUPLENTRY, enrollment successful; duplicate entries found and replaced
%MCC-I-ENRDUPLENTRY, enrollment successful; duplicate entries found and replaced
%MCC-F-MIR_INIT_FAIL, the MIR could not be initialized
%MCC-F-MIR_INIT_FAIL, the MIR could not be initialized
%MCC-I-ENRDUPLENTRY, enrollment successful; duplicate entries found and replaced
%MCC-I-ENRDUPLENTRY, enrollment successful; duplicate entries found and replaced
%MCC-F-MIR_INIT_FAIL, the MIR could not be initialized
%MCC-F-MIR_INIT_FAIL, the MIR could not be initialized

MCC 0 ALARMS RULE __dummy_test
AT 11-NOV-1992 12:15:39

Data base error occurred while storing rule information.
                             MIR Status = %MCC-F-MIR_INIT_FAIL, the MIR could
                                          not be initialized
%MCC-F-MIR_INIT_FAIL, the MIR could not be initialized
%MCC-F-TRM_FAILURE, PM unable to continue
%DCL-W-SKPDAT, image data (records not beginning with "$") ignored


The MCC_STARTUP_BMS startup procedure for DECmcc V1.2.3 is now ending.


   Completing DECmcc BMS Post Installation Procedure ...


   Beginning DECmcc BMS Installation Verification Procedure ...



   The IVP for DECmcc BMS will now be run.

DECmcc (V1.2.3)


MCC 0
AT 11-NOV-1992 12:15:56

Test Successful
DECmcc (V1.2.3)


MCC 0 FCL
AT 11-NOV-1992 12:16:09

Test Successful
DECmcc (V1.2.3)


MCC 0 REGISTRATION_FM
AT 11-NOV-1992 12:16:22

Test Successful
DECmcc (V1.2.3)


MCC 0 DNA4_AM
AT 11-NOV-1992 12:16:36

Test Successful
DECmcc (V1.2.3)


MCC 0 DNA5_AM
AT 11-NOV-1992 12:16:50

Test Successful.
DECmcc (V1.2.3)


MCC 0 ICONICMAP
AT 11-NOV-1992 12:17:03

Test Successful
DECmcc (V1.2.3)


MCC 0 DOMAIN_FM
AT 11-NOV-1992 12:17:16

Test Successful
DECmcc (V1.2.3)


MCC 0 SAMPLE_AM
AT 11-NOV-1992 12:17:29

Test successful.
DECmcc (V1.2.3)


MCC 0 ETHERNET_AM
AT 11-NOV-1992 12:17:42

Test successful.
DECmcc (V1.2.3)


MCC 0 TCPIP_AM
AT 11-NOV-1992 12:17:56

Test successful.
DECmcc (V1.2.3)


MCC 0 CIRCUIT_AM
AT 11-NOV-1992 12:18:10

Test successful.
AT 11-NOV-1992 12:18:10

Test successful.
DECmcc (V1.2.3)


MCC 0 ALARMS
AT 11-NOV-1992 12:18:23

Test successful.
DECmcc (V1.2.3)


MCC 0 HISTORIAN_FM
AT 11-NOV-1992 12:18:36

Test Successful
DECmcc (V1.2.3)


MCC 0 PA
AT 11-NOV-1992 12:18:50

Test Successful
DECmcc (V1.2.3)


MCC 0 EXPORTER_FM
AT 11-NOV-1992 12:19:04

Test Successful
DECmcc (V1.2.3)

%MCC-E-DSPMMLOCFILERR, dispatch local management module file access error during
 probe
%MCC-E-DSPMMLOCFILERR, dispatch local management module file access error during
 probe

   The following command failed.

      "MANAGE/ENTERPRISE TEST MCC 0 NOTIFICATION_FM, TO FILE = MCCBMS$OUT.TXT"

   DECmcc BMS V1.2.3  Installation Failed


%MCC-F-FAILED, fatal DECmcc error

   *********************************************************

   Fatal DECmcc BMS V1.2.3 event occurred during installation

   *********************************************************

%VMSINSTAL-E-IVPFAIL, The IVP for MCCBMS V1.2 has failed.


        VMSINSTAL procedure done at 12:19

    

    
    I forgot to mention in the base note that this was an upgrade
    installation from V1.2
    
    Paul.