| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 4042.1 | did you re-enroll? | TOOK::MCPHERSON | pre-retinal integration | Thu Nov 05 1992 11:41 | 13 |
| Can you post the exact error text, please? Your description is a little
vague.
Did you re-ENROLL the AMs? (note that this is different from re-INSTALLING).
e.g.
MCC> enroll mcc_bridge_am
MCC> enroll mcc_terminal_server_am
etc,
Then see what happens.
/doug
|
| 4042.2 | Do you have a log? | TEMTY::L_GROSSMAN | | Thu Nov 05 1992 12:13 | 3 |
| If you do could you add it or mail it to me.
Thanks
|
| 4042.3 | $ mange/tool rebuild fixed the problem. | ANTIK::WESTERBERG | Stefan Westerberg DS Stockholm | Fri Nov 06 1992 03:40 | 14 |
| Hi, I experienced the same problem. I also saw that all AM where present in
the tool box, so I then tried too rebuild the parser table... and what do you
know, every thing worked like clock work, except from one little thing. If I
click into MCC icon the only global classes shown is those who is supplied with
BMS 1.2.
The installation log don't show any thing abnormal. To just do a re-enroll
didn't help me.
BMS 1.2.3 was installad on top on BMS 1.2.0 with the following AMs
ELM AM, TS AM, NETpod AM and SNA AM
/Stefan
|
| 4042.4 | | MFRNW1::SCHUSTER | Karl Schuster @MFR Network Services | Fri Nov 06 1992 07:35 | 11 |
| The enrollment of TSAM and ELM works.
But I cannot use any commands with BRIDGE or TERMINAL entities.
mcc> dir bridge * produces the following errors:
%MCC-I-NOPARCMD bridge
%MCC-I-SYSNTAXERR ....
%MCC-W-ENTUNKNOWN ....
The same happens for TERMINAL_SERVER entities.
Karl
|
| 4042.5 | Same problem here... | KAOFS::BOIVIN | Moi, j'viens du nord! | Fri Nov 06 1992 10:44 | 12 |
| I also did the upgrade from V1.2 to V1.2.3 and "lost" my bridge and
terminal server entities. Fortunately, I selected to NOT purge my files
during the UPGRADE.
I found that a new MCC_DICTIONNARY.BPT had been created (much smaller than
my original one) so I renamed the new dictionnary to *.OLD, restarted MCC, ELM
and TSAM (and re-enrolled). All seems OK now... Should I check/rename anything
else?
Thanks,
Ed
|
| 4042.6 | Problem solved with kit anncounced in 3. | TOOK::OCONNOR | Dodge Vegga-matic there in the parking lot | Mon Nov 09 1992 07:28 | 8 |
|
You have solved the problem. We were putting the kit's dictionary in
place no matter whether we were in upgrade or install modes. The kit
now posted to PPINC fixes this problem.
Regards,
Joe
|