[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:DECmcc user notes file. Does not replace IPMT.
Notice:Use IPMT for problems. Newsletter location in note 6187
Moderator:TAEC::BEROUD
Created:Mon Aug 21 1989
Last Modified:Wed Jun 04 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:6497
Total number of notes:27359

3998.0. "DCL error in autoconfig registration mode" by CSDNET::DICASTRO (jet ski jockey) Fri Oct 30 1992 08:41

    I am running DECmcc on a 3900, and am pretty new to this, so forgive
    the uncertainty....
    
    I attempted to run the autoconfig in address mode for decnet phase IV
    nodes in my local domain named LMO. I did this overnight, when I
    returned, all I had were errors saying the registration scripts failed.
    I pulled down on the scroll bar to find a DCL error when mcc tried
    to do the registration. 
    
    unrecognized command verb, re-enter w/ fewre parameters
    /REGISTER/
    
    Is this a known problem or bug, or a local issue w/ my setup ?
    
    Any tips, hints, ideas ....?
    
    
    Thanx..........bob
T.RTitleUserPersonal
Name		DateLines
3998.1PROFILECSDNET::DICASTROjet ski jockeyFri Oct 30 1992 13:2826
DONT KNOW IF THIS HELPS BUT........

Hardware profile:

VS 3500 w/ 2 RA70's and a TK70 drive
24 meg main memory

AITMCC::  37.194

DOMAIN NAME: LMO


Software Profile:

Product  Version
==========================
VMS	 V 5.5
DECmcc	 V 1.2 (?)
RDB 	 V 4.1
DTM 	 V 3.2
LSE 	 V 3.1
CDD 	 V 5.1
DTR 	 V 6.0
DECGRAPH V 1.6
3998.2Doesn't ring a bell for meTOOK::MINTZLKG2-2 near pole X3, cube 6072, dtn 226-5033Fri Oct 30 1992 14:204
If this doesn't ring a bell for someone right away, you should probably
file a QAR (see note 7).  That will get the attention of the right people.
3998.3Please post registration .com and .log filesTOOK::FIGWERUlla Figwer LKG2-2/T2 x226-7858Fri Nov 13 1992 10:4217
    
    Hello,
    
    I suspect that the command to invoke DECmcc which appears at the
    beginning of the Autoconfiguration registration script failed.  If
    that command fails then all the MCC commands to register would be
    read by DCL, rather than MCC, causing a slew of DCL errors.

    Bob, could you send us (or post here) the registration command
    procedure (mcc_<domain>_registration.com) and log file 
    (mcc_<domain>_registration.log)?  These will give us more
    clues as to the cause of the problem.
    
    Thanks,
    
    Ulla
3998.4Possible workaround - See 4100.1TOOK::FIGWERUlla Figwer LKG2-2/T2 x226-7858Wed Nov 18 1992 13:598
    
    Please see note 4100.1 for a possible workaround for this
    problem.
    
    Thanks,
    
    Ulla