[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:	DECmcc user notes file. Does not replace IPMT.
Notice:	Use IPMT for problems. Newsletter location in note 6187
Moderator:	TAEC::BEROUD

Created:	Mon Aug 21 1989
Last Modified:	Wed Jun 04 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	6497
Total number of notes:	27359

3975.0. "Help with Demo?" by MAIL::CLAYTON (Merlin Clayton DTN 445-7217) Tue Oct 27 1992 12:55

In preparation for a cuatomer demo event, I'm looking for a little assistance.
Specifically:

  1. does anyone have any canned DECmcc reports and graphs in a format 
     that I could copy over the network (.ps ?) and print out for customer
     distribution?

  2. is the SNA access module available internally?
     I know I cann't demo the SNA AM because of the logistical problems,
     but I though possibly that I could paartially register SNA devices
     just to show how it might appear from the DECmcc perspective. Anyone
     have any other suggestions on how I might demo the some capabilities
     to manage the SNA environment?

Thanks.

Merlin

T.R Title User Personal
Name Date Lines

3975.1 FOUR62::LICAUSE Al Licause (338-5661) Tue Oct 27 1992 14:11 23

T.R	Title	User	Personal Name	Date	Lines
3975.1		FOUR62::LICAUSE	Al Licause (338-5661)	`Tue Oct 27 1992 14:11`	23
	Merlin, I have been tasked with setting up DECmcc on the demo system on the Open/Net, area 45 on the Easynet (0ld ACTnet). If you are at a facility that has a demo center, we may be able to help. I have also generated some reports which can be made available for a demo. With regard to the SNA software....it has just gone to SSD and pointers to same can be found in notes file NOTED::POLYCENTER_SNA_MANAGER. The problem is that unless you have access to the IBM system and currently, the only one supporting any kind of SNA MCC demo is the one in Valbonne, you won't be able to do anything other than show the TOOLKIT icons. According to what I've read so far, SNANODES do not support partial registration. Those in the know, please correct any bad information here! If I can be of assistance, please give me a call directly. Al

Merlin,

I have been tasked with setting up DECmcc on the demo system on the Open/Net,
area 45 on the Easynet (0ld ACTnet).

If you are at a facility that has a demo center, we may be able to help.

I have also generated some reports which can be made available for a demo.

With regard to the SNA software....it has just gone to SSD and pointers to
same can be found in notes file NOTED::POLYCENTER_SNA_MANAGER.  

The problem is that unless you have access to the IBM system and currently,
the only one supporting any kind of SNA MCC demo is the one in Valbonne,
you won't be able to do anything other than show the TOOLKIT icons.  

According to what I've read so far, SNANODES do not support partial registration.

Those in the know, please correct any bad information here!

If I can be of assistance, please give me a call directly.

Al