| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
I have a SUN declared in my domain running SUNlink DNi 7.0 ( I'm using
DECmcc BMS 1.2, VMS 5.5 and UCX 2.0)
When I do SHOW ... ALL STAT from the FCL interface I get:
Node4 SUN001 Line le0
AT 19-OCT-1992 15:57:40 Statistics
Cannot read attributes.
MCC Error = NICE request had an unrecognized
parameter type.
likewise, I get the same error from the iconic map and when I try to
use the circuit. However when by accident I do a graph of the line traffic.
In this case, as soon as I select one of the categories, eg Statistics,
counters, etc DECmcc stack dumps with the following message:
%CMA-F-EXCCOP, exception raised; VMS condition code follows
-SYSTEM-F-FLTDIV, arithmetic trap, floating/decimal divide by zero at PC=0022D89
2, PSL=03C00000
%TRACE-F-TRACEBACK, symbolic stack dump follows
module name routine name line rel PC abs PC
0004B8C4 0004B8C4
0007C782 0007C782
000775DC 000775DC
0007AC78 0007AC78
What, if anything, have I missed? I can't find my DECnet statistics
anywhere. Why does it crash?
Everything works fine if I do SHOW SNMP ...... ALL STAt
Thanks for any help
Steve
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3913.1 | same from ULTRIX BMS | AZUR::NAVARRO | EIC Valbonne 828-5161... On the Road ... | Thu Oct 22 1992 13:52 | 19 |
Steve,
I got nearly the same answer from MCC Ultrix on a SunOS using Sunlinkdni 7.0
Cannot read attributes.
MCC Error = NICE request had an unrecognized
parameter type.
I used to do task to task programming using Sunlinkdni 7.0 on a sparc station .
That worked fine , but I founded a number of things where SunOS implementation
differs slightly from Ultrix or VMS DECnet implementation , and I will not
be surprised that their implemention of NICE protocol differs or is
incompatible with native DECnet (just a feeling).
Jean
| |||||
| 3913.2 | We should be better than SUN | KAZAN::HOPE | dtn: 858-1452, Paris, France | Fri Oct 23 1992 11:45 | 22 |
Ok, so SUN DECnet lacks some functionality, but that shouldn't cause
my DECmcc to Crash when I do a graph. It should produce the graph
window with my little blue man indicating a problem.
How do we get this resolved?
>>> use the circuit. However when by accident I do a graph of the line traffic.
>>> In this case, as soon as I select one of the categories, eg Statistics,
>>> counters, etc DECmcc stack dumps with the following message:
>>>
>>>%CMA-F-EXCCOP, exception raised; VMS condition code follows
>>>-SYSTEM-F-FLTDIV, arithmetic trap, floating/decimal divide by zero at PC=0022D89
>>>2, PSL=03C00000
>>>%TRACE-F-TRACEBACK, symbolic stack dump follows
>>>module name routine name line rel PC abs PC
>>>
>>> 0004B8C4 0004B8C4
>>> 0007C782 0007C782
>>> 000775DC 000775DC
>>> 0007AC78 0007AC78
>>>
>>>
| |||||
| 3913.3 | See note 7 for QARs | TOOK::MINTZ | LKG2-2 near pole X3, cube 6072, dtn 226-5033 | Mon Oct 26 1992 10:34 | 5 |
>? How do we get this resolved? If you think you have uncovered a bug, please file a QAR. See note 7 for directions. | |||||
| 3913.4 | QAR 523 submitted | KAZAN::HOPE | dtn: 858-1452, Paris, France | Fri Oct 30 1992 10:48 | 4 |
QAR 523 submitted.
(My network connection let me down as I was entering the
Memory 80 M, VAX 4000-60 and local naming)
| |||||