|
>Hi all,
>
>are there any plans to do an Access Module for the Ericsson ERIPAX X.25 switch?
Before answering this question , you need (and your customer) decide exactly
what they want to get from this : Do they want just send alarms/events to mcc
or do they want as well send commands to the x25 siwtches .
as you might know , Ericsson sell a management platform based on VMS to
manage their X25 switchs (nms400) . If your customer just want to start
with a central alarm system from Mcc , then you should through the
Data collector be able to get those informations .
>If not, can anyone say something about the scope (e.g. VERY approximate man days)
>of such a project?
Again , this directly depend on the scope of the customer needs .
Can you provide more information ?
>We have a potential customer for it here in Frankfurt.
There a a bunch of them in Europe that I know .
>Best regards
>Thomas
>P.S: Maybe this would be a nice project for DEC Sweden...?
|
| RE: .1
> as you might know , Ericsson sell a management platform based on VMS to
> manage their X25 switchs (nms400) . If your customer just want to start
> with a central alarm system from Mcc , then you should through the
> Data collector be able to get those informations .
Also - it quite possible that the Script AM could provide simple
integration into the Ericsson management platform *without* the need to
develop an entire Access Module of your own.
/keith
|