Conference azur::mcc

3475.0. "TEST chipcom hub timesout.ucx loop ok" by GIDDAY::MURPHY () Thu Jul 30 1992 22:03

    I have a problem with a couple of chipcom online concentrators where
    UCX loop works yet DECmcc TEST fails. There also appears to be no
    problem with using snmp access. attached is an example.
    
    Decmcc version T1.2-7
    chipcom hubs are version 2.1
    
    Thanks for any help
    	John Murphy....
***************************************************************************
    
    test snmp stcc01
    
    SNMP stcc01
    AT 31-JUL-1992 10:52:15
    
    Test unsuccessful: no answer from host.
    
    sho snmp stcc01 all att
    
    SNMP stcc01
    AT 31-JUL-1992 10:53:33 All Attributes
    
                                    Address = 161.43.1.252
                                       Name = stcc01
                            Registered Name = NETMAN_NS:.IP.STCC01
                             ipReachability = down
                                  sysUpTime = 395182300
                                   sysDescr = "Chipcom Management Module (EMM);
                                              Chipcom Agent OS; SNMP"
                                sysObjectID = "1.3.6.1.4.1.49.1.3.1.0"
                                 sysContact = "Network Adminstrator"
                                    sysName = "stcc01"
                                sysLocation = "Computer room"
                                sysServices = 1
                                   ifNumber = 272
                                   Location = "IN RH cab in computer room"
                        Implementation Desc = "HUb for all the systems in computer
                                              room"
                         Responsible Person = "Mathew crocker"
                               Phone Number = "3130821"
                               MAIL Account = -- Attribute Not Available
                                    Remarks = -- Attribute Not Available
                                  Text File = -- Attribute Not Available
    
    
    
    UCX> sho host stcc01
    
         LOCAL database
    
    Host address    Host name
    
    161.43.1.252    STCC01, stcc01
    UCX> loop stcc01
    %UCX-I-LOOPACT, STCC01 is alive
    UCX>
                                                                
  

	John,
		One possibility is that the ICMP ping is timing out.
	Can you try increasing the ICMP timeout value and running
	it again.

	MCC> SET MCC 0 TCPIP_AM ICMP TIMEOUT = 15

	Rahul.

    Rahul,
    	Would you belive on monday morning the DECmcc workstation crashed
    and now loop and test works fine. I'll keep an eye on it.
    
    Thank you for your help
    
    
    	John Murphy

	There's no better way than crashing your system to make things
	work again.  :-)

	On a more serious note, I believe that this could easily happen.
	If the UCX process was corrupted for some reason, stopping and
	restarting it would get rid of your problem.

	Rahul.