| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
I am running now DECmcc V1.2 SSB and still MCC_DNA4_EVL does not come up.
I say still because I had this problem already with the previous
1.2FT versions, and I tought It was a bug being solved.
I replaced all <os_node> of the MCC_STARTUP_DNA4_EVL.COM file
with my DECnet nodename. I have all privileges, including the 4
required privileges TMPMBX,NETMBX,DETACH,SYSNAM.
After starting the command file the process MCC_DNA4_EVL does not
come up, although at the end the procedures says:
...
! start the sink -- set it to state on and create the MCC_DNA4_EVL
! process to receive the events and make them available to DECmcc.
!
ENABLE node4 0 local sink monitor
Node4 48.574 Local Sink Monitor
AT 29-JUL-1992 20:14:41
Enable completed successfully.
exit
$!
$EXIT
The NCP Database shows nothing wrong!
NCP> SHO LOGGING MONITOR
Logging Volatile Summary as of 29-JUL-1992 20:19:53
Logging sink type = monitor
Sink Node Source Events State Name
on
48.574 (BRSCOM) (All sources) 0.0-9 MCC_DNA4_EVL
(All sources) 2.0-1
(All sources) 3.0-2
(All sources) 4.0-19
(All sources) 5.0-21
(All sources) 6.0-5
(All sources) 7.0-11
NCP>
How can I pinpoint the problem ?
Which mechanism is used from DECmcc to start MCC_DNA4_EVL ?
Under which VMS ACCOUNT MCC_DNA4_EVL is supposed to run ?
Is there any logical I can setup to get more information ?
You can run it through easynet to see this happen.
Regards,
Dominique PACCO.
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3461.1 | node names uppercase? | UFHIS::WSIEGMUND | Seaboard riding on Seahorse | Thu Jul 30 1992 03:58 | 6 |
Dominique, it may not be related but when I tried to start the evl I had to replace <os_node> with my decnet name using UPPERCASE characters. Wolfgang | |||||
| 3461.2 | >>> mcc_dna4_evl help is on the way... <<< | KITFOX::BALL | Thu Jul 30 1992 10:39 | 22 | |
Hi Dominique -
I am currently the developer/maintainer of DECmcc evl...
( 1 ) In the latest version of DECmcc the system lgoical
mcc_dna4_am_log was set. Is it set on your system?
If it is then deassign it. I created a procedure which
can be found in note 2790.7 for pre ssb kits. For
V1.2.0 this logical is no longer needed.
( 2 ) If this is not your problem can you send me your
mcc_startup_dna4_evl.com file.
( 3 ) Also please call and/or send mail so we can get you
you up and running as quick as possible.
===============================
my enet address: kitfox::ball
my phone number: 226-5345
my name: darryl l. ball
Thanks...
- darryl
| |||||
| 3461.3 | MCC_DNA4_AM_LOG made the difference. | KETJE::PACCO | Thu Jul 30 1992 12:08 | 12 | |
Daryll,
The MCC_DNA4_AM_LOG logical was set to 1
After deassigning it, it now works fine. This logical name
was remaining after my V1.2 installation, upgrading from FT V1.2.7
If I had rebooted, it sshould also have worked right.
N.B. I installed the patch on the FT version, but perhaps wrongly.
Because it did not work I decided to wait for the SSB kit.
Thanks,
Dominique PACCO.
| |||||