| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
I installed DECmcc v1.2 on a VAXstation 3100. When i try to register a SNMP entity DECmcc EXITS completely without any warning or error messages. It occurs after i have entered all necessary information including address and Synonym name. After I move my pointer to the ICONIC Map and click, the watch appears and after a few seconds the ICONIC Map disappears. If i then restart DECmcc and try to register the entity again it seems to work, at least an ICON appears. However, when i click the SNMP entity Icon after a few seconds i receive a message stating that no internet address was provided but of course it was. Has anyone else seen this problem yet or have any ideas on what i can do? Thanks, Rich -------------------------------------------------------------------------------- More info: - The installation of BMS and the IVP test completed fine. - I tested the SNMP AM via DECmcc and it also completed fine. - This installation was an update to v1.1, however the old namespace has been deleted and DNS reinstalled prior to the v1.2 update. - The entity is registered with UCX. - The entities in question worked fine with v1.1 of BMS - The registration of all other entity types work fine inlcuding NODE4, BRIDGES TERMINAL SERVERS, etc.
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3410.1 | QAR 3302 | TOOK::MINTZ | Erik Mintz, dtn 226-5033 | Wed Jul 22 1992 15:58 | 1 |
I have entered this note as QAR 3302 | |||||
| 3410.2 | Try registering thru FCL. | YAHEY::BOSE | Thu Jul 23 1992 10:28 | 6 | |
Can you try registering the SNMP entities from FCL and post the results here. Another thing you might want to try is adding the registered entity to the domain and see if it appears on the map. Rahul. | |||||
| 3410.3 | DYOSW5::ALLEN | R.W. Allen | Tue Jul 28 1992 13:00 | 34 | |
Sorry it took so long to get a response to reply #2, but the system is at a customer site and i don't have quick access to it. But anyway, I did try to register the entity from FCL and here is the result: -------------------------------------------------------------------------------- $ mcc DECmcc (v1.2.0) MCC> register snmp .R45B synonym=R45B, address=134.131.31.254, - in domain=netman_ns:.B45_Comm_Cabinet %CMA-EXCCOP, exception raised; VMS condition code follows -SYSTEM-F-RADRMOD, reserved addressing fault at PC=0000ad78, PSL=03C00000 %TRACE-F-TRACEBACK, symbolic stack dump follows module name routine name line rel PC abs PC 0004B8C0 0004B8C0 0007C582 0007C582 0051CF9A 0051CF9A 0051D87D 0051D87D 0051876A 0051876A 000A2F65 000A2F65 0007AAAB 0007AAAB %TRACE-F-BADSTACK, stack has been overwritten $ $ ------------------------------------------------------------------------------- Even with the dump you see here, partial registration is still acheived. With partial registration, of course an ICON does appear on the MAP. Trying to click on the ICON results in a error message stating "No internet name provided". Thanks in advance for any help, Rich | |||||
| 3410.4 | Is your stack logical defined ? | YAHEY::BOSE | Tue Jul 28 1992 15:24 | 10 | |
Can you check if the SNMP AM stack logical is defined, and if so, what value it has ? $ show logical MCC_TCPIP_AM_STACK It should have a value of at least 100 to run with UCX. (For TGV Multinet it should be 200). Rahul. | |||||
| 3410.5 | DYOSW5::ALLEN | R.W. Allen | Thu Jul 30 1992 19:44 | 5 | |
Hi, The logical MCC_TCPIP_AM_STACK is set at 100. I am using the UCX product. Rich | |||||
| 3410.6 | QAR answer | TOOK::MINTZ | LKG2-2 near pole X3, cube 6072, dtn 226-5033 | Mon Oct 26 1992 16:19 | 4 |
The answer to QAR 03302 has arrived. Do you wish to see it [Y]? Use of obsolete TCPIP AM executable caused this problem. | |||||