[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
|
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
2980.0. "Performance/Alarms problem." by SUBURB::SMYTHI (Ian Smyth 830-3869) Tue May 12 1992 12:59
Please look at the attached log file from MCC. Note that I've edited
it so that the important bits fit into 80 columns.
The problem is (I think) around specifing time. I created rule TEST1
via the IMPM and it's a close copy of the example on page 5-30 of the alarms
manual. When the rule is enabled, the alarm data never changes. See the
Notification information. The packet rate never changes. If I take the same
expression and use it in a Show Node4... packet rate .... command, the
packet rate does change.
!
show domain easynet rule test1 all attrib
!
!Domain UKHUB_NS:.easynet Rule test1
!AT 12-MAY-1992 14:06:48 All Attributes
!
! Name = test1
! State = Disabled
!The rule Domain UKHUB_NS:.easynet Rule test1 was not enabled, and therefore
has no counters.
!
! Expression = (Node4 A41RT2 Packet Rate > 5,
for start=(+0:00)
duration = 00:02:00, at every=00:05:00)
! Severity = Major
! Probable Cause = Unknown
! Target Object = Node4 UKHUB_NS:.DNA_Node.A41RT2
!
!
enab domain easynet rule test1
!
!Domain UKHUB_NS:.easynet Rule test1
!AT 12-MAY-1992 14:07:39
!
!Normal operation has begun.
!
show domain easynet rule test1 all attrib
!
!Domain UKHUB_NS:.easynet Rule test1
!AT 12-MAY-1992 14:07:45 All Attributes
!
! Name = test1
! State = Enabled
! Substate = Running
! Result of Last Evaluation = In progress
! Current Severity = Major
! Creation Timestamp = 12-MAY-1992 14:07:39.46
! Evaluation Error = 0
! Evaluation True = 0
! Evaluation False = 0
! Expression = (Node4 A41RT2 Packet Rate > 5,
for start=(+0:00) duration = 00:02:00,
at every=00:05:00)
! Severity = Major
! Probable Cause = Unknown
! Target Object = Node4 UKHUB_NS:.DNA_Node.A41RT2
!
!!!!!!!!!!!!!!! Alarm, 12-MAY-1992 14:09:45 !!!!!!!!!!!!!! [1]
!Domain: UKHUB_NS:.easynet Severity: Major
!Notification Entity: Node4 UKHUB_NS:.DNA_Node.A41RT2
!Event Source: Domain UKHUB_NS:.easynet Rule test1
!Event: OSI Rule Fired
!
! Event Type = QualityofServiceAlarm
! Event Time = 12-MAY-1992 14:09:43.22
! Probable Cause = Unknown
! Additional Info = { (
! significance = True,
! information = "Rule fired:
Node4 A41RT2 Packet Rate = 220.83 12-MAY-1992 14:09:39.65" ),
! (
! significance = True,
! information = "(Node4 A41RT2 Packet Rate > 5,
for start=(+0:00) duration = 00:02:00, at
! every=00:05:00)" ) }
! Managed Object = Node4 A41RT2
! Perceived Severity = Major
!
!
!
!!!!!!!!!!!!!!! Alarm, 12-MAY-1992 14:12:40 !!!!!!!!!!!!!! [1]
!Domain: UKHUB_NS:.easynet Severity: Major
!Notification Entity: Node4 UKHUB_NS:.DNA_Node.A41RT2
!Event Source: Domain UKHUB_NS:.easynet Rule test1
!Event: OSI Rule Fired
!
! Event Type = QualityofServiceAlarm
! Event Time = 12-MAY-1992 14:12:39.63
! Probable Cause = Unknown
! Additional Info = { (
! significance = True,
! information = "Rule fired:
Node4 A41RT2 Packet Rate = 220.83 12-MAY-1992 14:09:39.65" ),
! (
! significance = True,
! information = "(Node4 A41RT2 Packet Rate > 5, for start=(+0:00) duration = 00:02:00, at
! every=00:05:00)" ) }
! Managed Object = Node4 A41RT2
! Perceived Severity = Major
!
!
!
!!!!!!!!!!!!!!! Alarm, 12-MAY-1992 14:17:41 !!!!!!!!!!!!!! [1]
!Domain: UKHUB_NS:.easynet Severity: Major
!Notification Entity: Node4 UKHUB_NS:.DNA_Node.A41RT2
!Event Source: Domain UKHUB_NS:.easynet Rule test1
!Event: OSI Rule Fired
!
! Event Type = QualityofServiceAlarm
! Event Time = 12-MAY-1992 14:17:39.63
! Probable Cause = Unknown
! Additional Info = { (
! significance = True,
! information = "Rule fired:
Node4 A41RT2 Packet Rate = 220.83 12-MAY-1992 14:09:39.65" ),
! (
! significance = True,
! information = "(Node4 A41RT2 Packet Rate > 5, for start=(+0:00) duration = 00:02:00, at
! every=00:05:00)" ) }
! Managed Object = Node4 A41RT2
! Perceived Severity = Major
!
!
!
disab domain easynet rule test1
!
!Domain UKHUB_NS:.easynet Rule test1
!AT 12-MAY-1992 14:18:19
!
!Normal operation will be terminated.
!
show Node4 A41RT2 Packet Rate, for start=(+0:00) duration = 00:02:00,
at every=00:05:00
!
!Node4 A41RT2
!AT 12-MAY-1992 14:20:58 Statistics
!
! Packet Rate = 180.57 Packets/Sec
!
!Node4 A41RT2
!AT 12-MAY-1992 14:25:58 Statistics
!
! Packet Rate = 176.95 Packets/Sec
!
!Node4 A41RT2
!AT 12-MAY-1992 14:30:58 Statistics
!
! Packet Rate = 157.71 Packets/Sec
!%MCC-S-CANCELED, serviced cancel request calls
!%MCC-E-ALERT_TERMREQ, thread termination requested
!
exit
!
| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 2980.1 | qar'd as 2957 in MCC_INTERNAL | DADA::DITMARS | Pete | Wed May 13 1992 10:40 | 7 |
| That's weird.
It looks like alarms isn't getting new information for each poll, as if
the scope of interest (for clause) gets instantiated at the rule
enable time and doesn't get re-calculated at each polling interval.
We'll run it past some experts here to see what's going on.
|
| 2980.2 | Any update? | SUBURB::SMYTHI | Ian Smyth 830-3869 | Fri May 15 1992 13:22 | 6 |
|
Any update on this? I've had a couple of telephone calls from a
developer.
thanks,
Ian
|
| 2980.3 | a bug | TOOK::ANWARUDDIN | Anwar | Tue May 19 1992 18:04 | 2 |
| Thanks for finding this bug for us. This has been qar'd and will be fixed.
|