Conference azur::mcc

2756.0. " Problem with CISCO mib and DECmcc V1.1 " by SEDSWS::MALLOY () Tue Apr 14 1992 10:37

Problems with CISCO MIB 
------------------------
	Peter Best has check with CISCO to see, if the mib we have is the 
latest. With have the latest MIB

Errors from decterm which started ($ mana/enter/inter=decw)

When accessing  CISCO router
------
error 1 
%SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=00000032, PC
=004155EC, PSL=03C00000
%SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=00000015, PC
=0040AEC4, PSL=03C00000
%SYSTEM-F-ACCVIO, access violation, reason mask=01, virtual address=01C9BF43, PC
=0042020D, PSL=03C00000
%SYSTEM-F-ACCVIO, access violation, reason mask=01, virtual address=CE9F34B2, PC
=00420209, PSL=03C00008
%SYSTEM-F-ACCVIO, access violation, reason mask=01, virtual address=9E5C0154, PC
=00417614, PSL=03C00008
%SYSTEM-E-ACCVIO, access violation, reason mask=00, virtual address=0000000A, PC
                                                              
======
Error 2
%SYSTEM-F-ACCVIO, access violation, reason mask=04, virtual address=0019CB68, PC
=000CFAEE, PSL=03C00000

  Improperly handled condition, image exit forced.

        Signal arguments              Stack contents

%SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=7FF17400, PC
=80429389, PSL=03C00004
=====
Error 3
%SYSTEM-F-ACCVIO, access violation, reason mask=04, virtual address=0019CB68, PC
=000CFAEE, PSL=03C00000

Improperly handled condition, image exit forced.

        Signal arguments              Stack contents

%SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=7FF17400, PC
=80429389, PSL=03C00004
X Toolkit Error: Couldn't find per display information
=====
	Two things happen in the Iconic map

	a)Sometimes when accessing CISCO--|Decnet|---DnaAreaTables
		The mouse arrow is in permanent processing state and
never finishes.
	DECmcc message Software error . An internal error occurred in
		the ICONIC MAP PM

 ERROR 1 on decterm. I then closedown the process.
		*****************************

	b)Sometime when accessing  CISCO--|Decnet|---DnaAreaTable
	
	The whole window collapse
	ERROR 3 on decterm

===========================================================================

I have noticed if you access CISCO parent and check attri,char,etc .Then
access DECnet (CISCO---->Decnet) and check char,attri,etc .A good chance
of working .
	Then finally access DnaAreaTable is seem to be ok.
			CISCO---->Decnet---->DnaAreaTables

Then you can pop in/out of different CISCO entities with out any errors.

		CISCO software version 8.3
		+++++++++++++++++++++++++++

Access normal SNMP entity is ok   EGP,ICMP,IP,TCP,UDP 
 
From mana/ent/tools

-> Class (1) : SNMP
     Definition (3) : PRESENTATION_NAME
     Definition (3) : INSTANCE_REQUIRED
     Definition (3) : DYNAMIC
     Definition (3) : INSTANCE_DATATYPE
     Subclass (2) : ATTABLE 38
     Subclass (2) : CISCO 5009
     Subclass (2) : EGP 31
     Subclass (2) : ICMP 34
     Subclass (2) : INTERFACE 39
     Subclass (2) : IP 37
     Subclass (2) : SNMP 29
     Subclass (2) : TCP 33
     Subclass (2) : UDP 32
     Attribute (5) : ADDRESS 99
     Attribute (5) : IFNUMBER 3
     Attribute (5) : IMPLEMENTATIONDESC 101
     Attribute (5) : LOCATION 100
     Attribute (5) : MAILACCOUNT 104
     Attribute (5) : NAME 98
     Attribute (5) : PHONENUMBER 103
     Attribute (5) : REMARKS 105
     Attribute (5) : RESPONSIBLEPERSON 102
     Attribute (5) : SYSCONTACT 4
     Attribute (5) : SYSDESCR 1
     Attribute (5) : SYSLOCATION 6
     Attribute (5) : SYSNAME 8
     Attribute (5) : SYSOBJECTID 2
     Attribute (5) : SYSSERVICES 7
     Attribute (5) : SYSUPTIME 5
     Attribute (5) : TEXTFILE 106
     Directive (6) : DEREGISTER 30
     Directive (6) : DIRECTORY 26
     Directive (6) : ERASE 33
     Directive (6) : REGISTER 29
     Directive (6) : SET 2
     Directive (6) : SHOW 1
     Attribute_Partition (11) : CHARACTERISTICS 4
     Attribute_Partition (11) : COUNTERS 3
     Attribute_Partition (11) : IDENTIFIERS 1
     Attribute_Partition (11) : REFERENCES 5

	

	What version of DECmcc are you running ?

	rb

    
    	V1.1 with the TCP/IP SNMP AM v1.1
    
    Cheers...

    
    Version Is 1.1 .
    Do you want the image IDs
    
    		Gary 

	Yes, image IDs,(and the image dates), would be helpful. The SNMP AM
	V1.1 had a problem similar to the one you have described, and the
	SSB kit had to be updated with new images. You might want to refer
	to Notes 3.111, 1687 and 1694 for further discussion of the
	problem.

	Can you try the same command from FCL? If it works, but access 
	violates from the map, then one can safely assume that you do not 
	have the latest version of the V1.1 SNMP AM executable.

	Rahul.

    	Sit tight, we'll come back to you very soon...
    
    
    Cheers...

    Hi
    	Will I copied the latest and greatest MCC_TCPIP_AM.EXE;16 from
    node MODLAR point by  note 1687 or 1694 .
    
    I followed the instruction and guest what.
    
    	Error when enrolling MCC_TCPIP_AM.EXE  
    		Ident mismatch 
    
    Restored old am   component version = 1.1.0<<<<------
    		       ana/Image date 22-oct-1991
    Now trying to find latest SNMP V1.1 kit. Last kit install was 
    from node MKNME point to by 3.111
    
    This is turning into Nigthmare as per normal with DECMCC
    
    
    

	A mandatory update was issued along with the V1.1 ssb kit, if you
had installed the correct kit you would have had fewer nightmares.

Dan

Dan
 
	Thanks for your REPLY.

	I would love to install V1.1 (TCPIP AM) kits.
	If I could locate is on the network or on CD.

	I have the latest CDs ( VMS Consolidated Software Distribution)
	for March 1992. But as I excepted it is only V1.0 .

	Is V1.1 TOP SECRET and only available to a selected few ie
	States only 




		Gary
				DTN 7844 3308

Gary,
	See notes 3.113 and 3.116 for info on  V1.1 (TCPIP AM) kits.  This
kit will be on the next CONDIST CDs (May 92).

Dan