| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
I have a customer that has installed an FDDI ring that looks sort of
like this:
|---------|--------------------|---------|
|DECbridge|--------------------|DECbridge|
|620 | Fiber |620 |
----------- -----------
| | | |
| | | |
| | | |
|---------|--------------------|---------|
|DECbridge|--------------------|DECbridge|
|620 | |620 |
----------- -----------
I have an acceptance test plan to pass before the customer will sign
off on the network that includes setting alarms on the bridges that will
notify them that one or more of the fiber links has been broken.
I have tested this and I know what attribute of the bridge changes when
the link is broken. With the links connected properly the PHY PORT
STATE of both ports are in the "In Use" state when I do a show status
on the ports. With the link disconnected the PHY PORT STATE changes to
"Waiting".
My problem is that I can't find documentation that will tell me the
name of this atrribute so I can set the alarm.
I have looked in MCC_COMMON in the FDDI_MIBDEF.TXT and the
DEC_MIBDEF.TXT files and the Bridge AM manual. The only references I found
were for LAN Bridge 100, 150 and 200.
Can anyone tell me where to find the attribute definitions for the 600
series bridges? Or the name of this attribute as it is known to MCC?
I am in a real time crunch and I appreciate help from anyone. I will
be onsite today and can't read any replys to this note, so if anyone
can help me, please page me on my digital beeper at (405)791-9789. I'll
return your call immediately. I already have a call logged to Colorado
Springs.
Thanks in advance for any help.
Pam Shorrosh
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2737.1 | VCSESU::WADE | Bill Wade, VAXc Systems & Support Eng | Mon Apr 13 1992 10:36 | 22 | |
This is probably too late, but...
mcc> show bridge xxx phy port x all status
would give you the status attributes then you key your alarm off
of the one that you want -
Create MCC 0 ALARMS RULE 620-physport -
Description = "physical port 2 for 620 is not in use", -
Expression = (Bridge LOCAL_NS:.620-1 PHY Port 2 phy port state
<> In Use, at every=00:01), -
Procedure = SONOMA_SW:[MCC]MCC_ALARMS_MAIL_ALARM.COM;1, -
Exception Handler = SONOMA_SW:[MCC]MCC_ALARMS_MAIL_EXCEPTION.COM;1, -
Parameter = "wade", -
Queue = "sys$batch", -
Perceived Severity = Critical, -
in domain = LOCAL_NS:.ltn_bridges
/bill
| |||||