[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:	DECmcc user notes file. Does not replace IPMT.
Notice:	Use IPMT for problems. Newsletter location in note 6187
Moderator:	TAEC::BEROUD

Created:	Mon Aug 21 1989
Last Modified:	Wed Jun 04 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	6497
Total number of notes:	27359

2610.0. "ACS4400 and SNMP Module?" by ODIXIE::PEACOCKR () Mon Mar 23 1992 09:54

    I have a customer who is using ACS4100's and ACS4400's to link to
    remote sites.  I am not familiar with these devices, but they have
    similiar functionality to the Vitalink bridges.  I saw the users guide
    the other day and realized that these ACS boxes have some SNMP
    functionality.
    
    I'm thinking about putting the SNMP module out there to see what I can
    do with it.
    
    Has anyone had any experience with these and the SNMP module?  Is
    anyone aware of any MIB definitions for the ACS bridges?
    
    Thanks,
    
    Rick

T.R Title User Personal
Name Date Lines

2610.1 some info NSCRUE::KEANE U.S. NIS Service Engineering and Delivery Mon Mar 23 1992 10:07 24

T.R	Title	User	Personal Name	Date	Lines
2610.1	some info	NSCRUE::KEANE	U.S. NIS Service Engineering and Delivery	`Mon Mar 23 1992 10:07`	24
	I had a brief encounter with the acs routers and mcc v1.1 a while back. I did the first part of an installation and then someone else took over. Here are some things I ran into. 1) The customer recieved a new mib from acs in February. I had to make a couple of corrections to it to get it to load. After that I found out that it was not in concise format and therefore I did not get return information for most queries. 2) The acs mib is large. Too large for the standard mcc mib compiler to handle. Somewhere in this notes file there is a note about a "yacc stack overflow" error. The person that responded to the note was able to get a new mib compiler to me which corrected the problem. 3) If you plan to do any exporting or recording for the acs information then it will be necessary to augment. See the snmp am release notes for further info. Hope this gets you started. Give me a call or send mail if you need more info. Scott manfrd::keane dtn 523-2082


   I had a brief encounter with the acs routers and mcc v1.1 a while back. I
did the first part of an installation and then someone else took over. Here are
some things I ran into.

  1) The customer recieved a new mib from acs in February. I had to make a
couple of corrections to it to get it to load. After that I found out that
it was not in concise format and therefore I did not get return information
for most queries.

  2) The acs mib is large. Too large for the standard mcc mib compiler to 
handle. Somewhere in this notes file there is a note about a "yacc stack 
overflow" error. The person that responded to the note was able to get a new
mib compiler to me which corrected the problem. 

  3) If you plan to do any exporting or recording for the acs information then
it will be necessary to augment. See the snmp am release notes for further info.

 Hope this gets you started. Give me a call or send mail if you need more info.

 Scott 
 manfrd::keane
 dtn 523-2082