[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
|
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
2416.0. "Can't Resume after MODIFY an EXPORT" by CHILKA::JAGGI () Tue Feb 25 1992 11:18
Hi,
I have a problem when I try to RESUME an export after modifying
the export period.
MCC> resume exporting node4 .zsw.zswrtr circuit syn-1 -
_MCC> export target $disk1:[jaggi.mcc]mcc_mj.rdb
Node4 CHILKA_NS:.zsw.zswrtr Circuit syn-1
AT 25-FEB-1992 12:14:54
The requested operation cannot be completed
Entity Existence Info = Entity Existence Cannot Be Determined,
MCC Routine Error = %MCC-E-NOENTITY, no corresponding
entity instance exists
However, I have no problem to delete the exporting.
Below follows the detail of my operiation.
Any suggestions ?
Michel
===========================================================================
MCC> EXPORT NODE4 .zsw.zswrtr CIRCUIT syn-1 -
_MCC> BEGIN TIME = 12:05, END TIME = 13:05, -
_MCC> EXPORT PERIOD = 0:02, EXPORT TARGET =$DISK1:[JAGGI.MCC]MCC_MJ.RDB, -
_MCC> SEQUENCE NAME = MJ2, SEQUENCE NUMBER = 2
Node4 48.690 Circuit syn-1
AT 25-FEB-1992 12:00:58
Exporting started
MCC> show exporting node4 .zsw.zswrtr circuit syn-1 -
_MCC> EXPORT TARGET =$DISK1:[JAGGI.MCC]MCC_MJ.RDB
Node4 CHILKA_NS:.zsw.zswrtr Circuit syn-1
AT 25-FEB-1992 12:03:25
Exporting parameters are:
Exporting state = ACTIVE,
State since = 25-FEB-1992 12:01:01.55,
Export period = 0 00:02:00.00,
Begin time = 25-FEB-1992 12:05:00.00,
End time = 25-FEB-1992 13:05:00.00,
Export target = "$DISK1:[JAGGI.MCC]MCC_MJ.RDB",
Request time = 25-FEB-1992 12:00:58.83,
Requested by = "JAGGI",
Time of last successful poll = "NONE",
Number of successful polls = 0,
Time of last failed poll = "NONE",
Last poll failure reason = "N/A",
Number of failed polls = 0,
Last export time = "NONE",
Time of last export failure = "NONE",
Last export failure reason = "N/A",
Number of export failures = 0,
Sequence name = "MJ2",
Initial sequence number = 2,
Current sequence number = 2
MCC> suspend exporting node4 .zsw.zswrtr circuit syn-1 -
_MCC> EXPORT TARGET =$DISK1:[JAGGI.MCC]MCC_MJ.RDB
Node4 CHILKA_NS:.zsw.zswrtr Circuit syn-1
AT 25-FEB-1992 12:11:02
Exporting is suspended
MCC> show exporting node4 .zsw.zswrtr circuit syn-1 -
_MCC> EXPORT TARGET =$DISK1:[JAGGI.MCC]MCC_MJ.RDB
Node4 CHILKA_NS:.zsw.zswrtr Circuit syn-1
AT 25-FEB-1992 12:11:34
Exporting parameters are:
Exporting state = SUSPENDED,
State since = 25-FEB-1992 12:11:02.00,
Export period = 0 00:02:00.00,
Begin time = 25-FEB-1992 12:05:00.00,
End time = 25-FEB-1992 13:05:00.00,
Export target = "$DISK1:[JAGGI.MCC]MCC_MJ.RDB",
Request time = 25-FEB-1992 12:02:18.51,
Requested by = "JAGGI",
Time of last successful poll = "25-FEB-1992 12:09:00.24",
Number of successful polls = 3,
Time of last failed poll = "NONE",
Last poll failure reason = "N/A",
Number of failed polls = 0,
Last export time = "25-FEB-1992 12:09:00.24",
Time of last export failure = "NONE",
Last export failure reason = "N/A",
Number of export failures = 0,
Sequence name = "MJ2",
Initial sequence number = 2,
Current sequence number = 5
MCC> modify exporting node4 .zsw.zswrtr circuit syn-1 -
_MCC> export period 0:05:00, -
_MCC> export target $disk1:[jaggi.mcc]mcc_mj.rdb
Node4 CHILKA_NS:.zsw.zswrtr Circuit syn-1
AT 25-FEB-1992 12:13:11
Exporting modified
MCC> show exporting node4 .zsw.zswrtr circuit syn-1 -
_MCC> export target $disk1:[jaggi.mcc]mcc_mj.rdb
Node4 CHILKA_NS:.zsw.zswrtr Circuit syn-1
AT 25-FEB-1992 12:13:39
Exporting parameters are:
Exporting state = SUSPENDED,
State since = 25-FEB-1992 12:11:02.00,
Export period = 0 00:05:00.00,
Begin time = 25-FEB-1992 12:05:00.00,
End time = 25-FEB-1992 13:05:00.00,
Export target = "$disk1:[jaggi.mcc]mcc_mj.rdb",
Request time = 25-FEB-1992 12:02:18.51,
Requested by = "JAGGI",
Time of last successful poll = "25-FEB-1992 12:09:00.24",
Number of successful polls = 3,
Time of last failed poll = "NONE",
Last poll failure reason = "N/A",
Number of failed polls = 0,
Last export time = "25-FEB-1992 12:09:00.24",
Time of last export failure = "NONE",
Last export failure reason = "N/A",
Number of export failures = 0,
Sequence name = "MJ2",
Initial sequence number = 2,
Current sequence number = 5
MCC> resume exporting node4 .zsw.zswrtr circuit syn-1 -
_MCC> export target $disk1:[jaggi.mcc]mcc_mj.rdb
Node4 CHILKA_NS:.zsw.zswrtr Circuit syn-1
AT 25-FEB-1992 12:14:54
The requested operation cannot be completed
Entity Existence Info = Entity Existence Cannot Be Determined,
MCC Routine Error = %MCC-E-NOENTITY, no corresponding
entity instance exists
MCC> delete expor node4 .zsw.zswrtr circuit syn-1 -
export target = $disk1:[jaggi.mcc]mcc_mj.rdb
Node4 CHILKA_NS:.zsw.zswrtr Circuit syn-1
AT 25-FEB-1992 17:02:06
Exporting stopped and deleted
| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 2416.1 | Which version | TOOK::MINTZ | Erik Mintz, DECmcc Development, dtn 226-5033 | Wed Feb 26 1992 13:12 | 2 |
| This appears to be a VMS system, but which version of DECmcc is installed?
|
| 2416.2 | DECmcc V 1.1 | CHILKA::JAGGI | | Thu Feb 27 1992 02:43 | 3 |
| The problem appears with DECmcc V 1.1, all patches applied
Michel
|
| 2416.3 | | TOOK::SHMUYLOVICH | | Thu Feb 27 1992 17:14 | 16 |
|
Michel,
As far as I remember Exporter V1.1 has a bug in the Modify Exporting
command when export target argument is entered in lower case.
Please, repeat the same scenario using upper case:
modify exporting node4 .zsw.zswrtr circuit syn-1 -
export period 0:05:00, -
export target $DISK1:[JAGGI.MCC]MCC_MJ.RDB
SAm
|