| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
I installed the SNMP module and MIB Translator Utility to use the
Cabletron MIB. Everything seemed to install O.K., but when I did
shows on SNMP, I didn't get anything returned. I read in the manual
that SNMP looks for a community string, and that the default is public.
Not knowing much about Cabletron I asked my customer if he knew what
the community string was and he said it was "cbtron". We tried this
and couldn't get it to work.
I could get information from UDP, TCP and IP but nothing from SNMP.
I was using DECMCC 1.1. Any suggestions on how I could get this to
work or what I did wrong?
Thanks,
Rick
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2356.1 | YAHEY::BOSE | Mon Feb 17 1992 17:37 | 12 | ||
UDP, TCP, IP and SNMP are object groups in MIB II and have nothing to do with the Cabletron private mib. The reason you could not get any information back from the SNMP group is most likely because Cabletron has not implemented it. I do not think that the community name is the problem. If it was, then you would not have got any info back for UDP, TCP etc. Before you start using the cabletron private mib with SNMP AM V1.1, please read note #1921.7. Rahul. | |||||