| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
I tried saving statistics to a file that were gathered once a minute with a
duration of one minute (default), with the results as shown below. Basically,
trying to save stats every minute with everything else defaulted results in
some samples being missed. Note especially the times of each result.
Has anyone any suggestions, or is this a limitation (bug)?
Paul
Node4 sedhub Circuit solent
AT 6-FEB-1992 11:48:11 Statistics
Examination of Attributes shows:
Duration = 59 Seconds
Outbound Utilization = 0.87 Percent
Inbound Utilization = 20.32 Percent
Average Outbound Block Size = 34.16 Bytes
Average Inbound Block Size = 418.17 Bytes
Outbound Block Rate = 6.31 Blocks/Sec
Inbound Block Rate = 15.19 Blocks/Sec
Outbound Packet Rate = 6.19 Packets/Sec
Inbound Packet Rate = 15.07 Packets/Sec
Originating Packets Sent Percent = 0
Terminating Packets Received Percent = 0
Outbound Overhead = 1.88 Percent
Inbound Overhead = 0.78 Percent
Outbound Congestion Loss Percent = 0
Inbound Congestion Loss Percent = -- Invalid Value
Count of Circuits Down = 0
Count of Circuit Initialization Failures = 0
Count of Local Reply Timeouts = 0
Count of Remote Reply Timeouts = 0
Count of Circuit Outbound Data Errors = 0
Count of Circuit Inbound Data Errors = 0
Count of Local Buffer Errors = 0
Count of Remote Buffer Errors = 0
Count of Selection Timeouts = 0
Error Percent = 0
Count of Forwarding Congestion Loss = 0
Node4 sedhub Circuit solent
AT 6-FEB-1992 11:49:19 Statistics
Examination of Attributes shows:
Duration = 60 Seconds
Outbound Utilization = 0.8 Percent
Inbound Utilization = 16.91 Percent
Average Outbound Block Size = 39.82 Bytes
Average Inbound Block Size = 423.4 Bytes
Outbound Block Rate = 5.13 Blocks/Sec
Inbound Block Rate = 12.48 Blocks/Sec
Outbound Packet Rate = 5.03 Packets/Sec
Inbound Packet Rate = 12.38 Packets/Sec
Originating Packets Sent Percent = 0
Terminating Packets Received Percent = 0
Outbound Overhead = 1.95 Percent
Inbound Overhead = 0.8 Percent
Outbound Congestion Loss Percent = 0
Inbound Congestion Loss Percent = -- Invalid Value
Count of Circuits Down = 0
Count of Circuit Initialization Failures = 0
Count of Local Reply Timeouts = 0
Count of Remote Reply Timeouts = 0
Count of Circuit Outbound Data Errors = 0
Count of Circuit Inbound Data Errors = 0
Count of Local Buffer Errors = 0
Count of Remote Buffer Errors = 0
Count of Selection Timeouts = 0
Error Percent = 0
Count of Forwarding Congestion Loss = 0
Node4 sedhub Circuit solent
AT 6-FEB-1992 11:51:11 Statistics
Examination of Attributes shows:
Duration = 59 Seconds
Outbound Utilization = 0.78 Percent
Inbound Utilization = 29.94 Percent
Average Outbound Block Size = 24.51 Bytes
Average Inbound Block Size = 468.58 Bytes
Outbound Block Rate = 7.24 Blocks/Sec
Inbound Block Rate = 20.02 Blocks/Sec
Outbound Packet Rate = 7.22 Packets/Sec
Inbound Packet Rate = 20 Packets/Sec
Originating Packets Sent Percent = 0
Terminating Packets Received Percent = 0
Outbound Overhead = 0.23 Percent
Inbound Overhead = 8.000000E-02 Percent
Outbound Congestion Loss Percent = 0
Inbound Congestion Loss Percent = -- Invalid Value
Count of Circuits Down = 0
Count of Circuit Initialization Failures = 0
Count of Local Reply Timeouts = 0
Count of Remote Reply Timeouts = 0
Count of Circuit Outbound Data Errors = 0
Count of Circuit Inbound Data Errors = 0
Count of Local Buffer Errors = 0
Count of Remote Buffer Errors = 0
Count of Selection Timeouts = 0
Error Percent = 0
Count of Forwarding Congestion Loss = 0
Node4 sedhub Circuit solent
AT 6-FEB-1992 11:52:18 Statistics
Examination of Attributes shows:
Duration = 60 Seconds
Outbound Utilization = 4.52 Percent
Inbound Utilization = 32.3 Percent
Average Outbound Block Size = 161.62 Bytes
Average Inbound Block Size = 455.93 Bytes
Outbound Block Rate = 8.43 Blocks/Sec
Inbound Block Rate = 22.18 Blocks/Sec
Outbound Packet Rate = 8.42 Packets/Sec
Inbound Packet Rate = 22.15 Packets/Sec
Originating Packets Sent Percent = 0
Terminating Packets Received Percent = 0
Outbound Overhead = 0.2 Percent
Inbound Overhead = 0.15 Percent
Outbound Congestion Loss Percent = 0
Inbound Congestion Loss Percent = -- Invalid Value
Count of Circuits Down = 0
Count of Circuit Initialization Failures = 0
Count of Local Reply Timeouts = 0
Count of Remote Reply Timeouts = 0
Count of Circuit Outbound Data Errors = 0
Count of Circuit Inbound Data Errors = 0
Count of Local Buffer Errors = 0
Count of Remote Buffer Errors = 0
Count of Selection Timeouts = 0
Error Percent = 0
Count of Forwarding Congestion Loss = 0
Node4 sedhub Circuit solent
AT 6-FEB-1992 11:54:11 Statistics
Examination of Attributes shows:
Duration = 59 Seconds
Outbound Utilization = 0.69 Percent
Inbound Utilization = 16.36 Percent
Average Outbound Block Size = 43.14 Bytes
Average Inbound Block Size = 433.76 Bytes
Outbound Block Rate = 4.15 Blocks/Sec
Inbound Block Rate = 11.8 Blocks/Sec
Outbound Packet Rate = 4.15 Packets/Sec
Inbound Packet Rate = 11.8 Packets/Sec
Originating Packets Sent Percent = 0
Terminating Packets Received Percent = 0
Outbound Overhead = 0 Percent
Inbound Overhead = 0 Percent
Outbound Congestion Loss Percent = 0
Inbound Congestion Loss Percent = -- Invalid Value
Count of Circuits Down = 0
Count of Circuit Initialization Failures = 0
Count of Local Reply Timeouts = 0
Count of Remote Reply Timeouts = 0
Count of Circuit Outbound Data Errors = 0
Count of Circuit Inbound Data Errors = 0
Count of Local Buffer Errors = 0
Count of Remote Buffer Errors = 0
Count of Selection Timeouts = 0
Error Percent = 0
Count of Forwarding Congestion Loss = 0
Node4 sedhub Circuit solent
AT 6-FEB-1992 11:55:19 Statistics
Examination of Attributes shows:
Duration = 60 Seconds
Outbound Utilization = 0.48 Percent
Inbound Utilization = 19.51 Percent
Average Outbound Block Size = 20.57 Bytes
Average Inbound Block Size = 440.73 Bytes
Outbound Block Rate = 5 Blocks/Sec
Inbound Block Rate = 13.85 Blocks/Sec
Outbound Packet Rate = 4.98 Packets/Sec
Inbound Packet Rate = 13.83 Packets/Sec
Originating Packets Sent Percent = 0
Terminating Packets Received Percent = 0
Outbound Overhead = 0.33 Percent
Inbound Overhead = 0.12 Percent
Outbound Congestion Loss Percent = 0
Inbound Congestion Loss Percent = -- Invalid Value
Count of Circuits Down = 0
Count of Circuit Initialization Failures = 0
Count of Local Reply Timeouts = 0
Count of Remote Reply Timeouts = 0
Count of Circuit Outbound Data Errors = 0
Count of Circuit Inbound Data Errors = 0
Count of Local Buffer Errors = 0
Count of Remote Buffer Errors = 0
Count of Selection Timeouts = 0
Error Percent = 0
Count of Forwarding Congestion Loss = 0
Node4 sedhub Circuit solent
AT 6-FEB-1992 11:57:11 Statistics
Examination of Attributes shows:
Duration = 59 Seconds
Outbound Utilization = 1.25 Percent
Inbound Utilization = 50.51 Percent
Average Outbound Block Size = 39.77 Bytes
Average Inbound Block Size = 487.25 Bytes
Outbound Block Rate = 8.05 Blocks/Sec
Inbound Block Rate = 32.51 Blocks/Sec
Outbound Packet Rate = 8.05 Packets/Sec
Inbound Packet Rate = 32.51 Packets/Sec
Originating Packets Sent Percent = 0
Terminating Packets Received Percent = 0
Outbound Overhead = 0 Percent
Inbound Overhead = 0 Percent
Outbound Congestion Loss Percent = 0
Inbound Congestion Loss Percent = -- Invalid Value
Count of Circuits Down = 0
Count of Circuit Initialization Failures = 0
Count of Local Reply Timeouts = 0
Count of Remote Reply Timeouts = 0
Count of Circuit Outbound Data Errors = 0
Count of Circuit Inbound Data Errors = 0
Count of Local Buffer Errors = 0
Count of Remote Buffer Errors = 0
Count of Selection Timeouts = 0
Error Percent = 0
Count of Forwarding Congestion Loss = 0
Node4 sedhub Circuit solent
AT 6-FEB-1992 11:58:17 Statistics
Examination of Attributes shows:
Duration = 60 Seconds
Outbound Utilization = 0.76 Percent
Inbound Utilization = 50.47 Percent
Average Outbound Block Size = 29.36 Bytes
Average Inbound Block Size = 496.23 Bytes
Outbound Block Rate = 6.17 Blocks/Sec
Inbound Block Rate = 31.9 Blocks/Sec
Outbound Packet Rate = 6.15 Packets/Sec
Inbound Packet Rate = 31.88 Packets/Sec
Originating Packets Sent Percent = 0
Terminating Packets Received Percent = 0
Outbound Overhead = 0.27 Percent
Inbound Overhead = 5.000000E-02 Percent
Outbound Congestion Loss Percent = 0
Inbound Congestion Loss Percent = -- Invalid Value
Count of Circuits Down = 0
Count of Circuit Initialization Failures = 0
Count of Local Reply Timeouts = 0
Count of Remote Reply Timeouts = 0
Count of Circuit Outbound Data Errors = 0
Count of Circuit Inbound Data Errors = 0
Count of Local Buffer Errors = 0
Count of Remote Buffer Errors = 0
Count of Selection Timeouts = 0
Error Percent = 0
Count of Forwarding Congestion Loss = 0
Node4 sedhub Circuit solent
AT 6-FEB-1992 12:00:11 Statistics
Examination of Attributes shows:
Duration = 59 Seconds
Outbound Utilization = 0.95 Percent
Inbound Utilization = 37.82 Percent
Average Outbound Block Size = 35.34 Bytes
Average Inbound Block Size = 449.81 Bytes
Outbound Block Rate = 6.68 Blocks/Sec
Inbound Block Rate = 26.32 Blocks/Sec
Outbound Packet Rate = 6.42 Packets/Sec
Inbound Packet Rate = 26.14 Packets/Sec
Originating Packets Sent Percent = 0
Terminating Packets Received Percent = 0
Outbound Overhead = 3.81 Percent
Inbound Overhead = 0.71 Percent
Outbound Congestion Loss Percent = 0
Inbound Congestion Loss Percent = -- Invalid Value
Count of Circuits Down = 0
Count of Circuit Initialization Failures = 0
Count of Local Reply Timeouts = 0
Count of Remote Reply Timeouts = 0
Count of Circuit Outbound Data Errors = 0
Count of Circuit Inbound Data Errors = 0
Count of Local Buffer Errors = 0
Count of Remote Buffer Errors = 0
Count of Selection Timeouts = 0
Error Percent = 0
Count of Forwarding Congestion Loss = 0
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2299.1 | Increase the repeat factor. | TOOK::ANWARUDDIN | Anwar | Fri Feb 07 1992 14:59 | 8 |
If you are using the default duration of 1 min. & repeating the operation every minute you will miss some intermediate samples because of 1. network traffic 2. processing overhead You can reduce the number of samples missed by repeating at every, say, 65 or 70 secs instead of 60 secs. We are trying to reduce the overhead. | |||||