Conference azur::mcc

2272.0. "ELM AM 1.0 installation failed" by ZTOIS1::VISTA (Renato VISTA, SIS Strasbourg, France) Wed Feb 05 1992 06:06

Installing of MCCELM010 on a DECmcc BMS system failed during the IVP. 

	mVAX 3800, 16 MB, RF71
	VAX/VMS V5.4-1, 	DECmcc BMS V1.1
	Modules installed 	SNMP V1.0
				TSAM T1.0.1
  	       		Upgrade	SNMP V1.1.1 (+CHIPcom EMM 5100M-MGT private MIB)

The test directive worked successfully with the bridge AM, but not with 
the CONC_AM.

Also registering a concentrator does not work correctly.

Nevertheless, CONC_AM is seen as a child entity of MCC director global
entity ; directives applied on it seem to work correctly.

	Iconic Map directive SHOW MCC 0 CONC_AM ALL CHARACTERISTICS

			Component Version : V1.0.0


Registering a Concentrator with the Toolbox returns the following error
message in window box :
 
"Entity class specified is not currently enrolled. Please check spelling."


Output from the FCL interface:

MCC 0 BRIDGE_AM
AT 23-AUG-1991 10:22:27

Test successful.

test mcc 0 conc_am
%MCC-E-ATTRNOTALLOW, no attribute or argument allowed

show mcc 0 bridge_am all char

MCC 0 BRIDGE_AM
AT 23-AUG-1991 10:22:58 Characteristics

Examination of attributes shows:
               Component Identification = "DECmcc Bridge AM"
                      Component Version = V1.2.0

show mcc 0 conc_am all char
%MCC-W-ATTRUNKNOWN, unknown attribute CONC_AM



During a first installation, a capacity system disk problem made, via
AUDIT_SERVER process, all VMS processes suspended. So, when I discovered the
situation, I did PURGE/LO sys$sysdevice:[000000...] and SET PROC/NONSUSP/ID=...
to continue the installation.

Because IVP phase failed and previous written problem occurred, I rebuilt the 
Parse Table (in fact, the Dictionary itself seemed to have been updated 
correctly -command $MANA/TOOL/DICT and SHOW following by USE CLASS CONCENTRATOR
and SHOW again- all seemed to be OK). After rebuilding, the problem still
existed. So, I restored MCC_DICTIONARY.DAT, MCC_MIR_DIRECTORY.DAT,
MCC_DEFINITION.DAT and MCC_MIR_ATTRIBUTE.DAT and did the installation again
(with rebuilding non-restored HELP files).

The results were the same as previously. 


Is there anyone who has an idea of solution ?

Many thanks.
Renato

    PS : Just after having rebuilding parse tables again, the problem is
    always the same...
    
    PPS: see also note 1383.* to see a similar (???) case...
    
    

    

See response in note 1383.8

    
    See successful results in note 1383.9
    
    Thank you for help !!!
    
    Renato