Title: | DECmcc user notes file. Does not replace IPMT. |
Notice: | Use IPMT for problems. Newsletter location in note 6187 |
Moderator: | TAEC::BEROUD |
Created: | Mon Aug 21 1989 |
Last Modified: | Wed Jun 04 1997 |
Last Successful Update: | Fri Jun 06 1997 |
Number of topics: | 6497 |
Total number of notes: | 27359 |
Hi, I'm trying to set up the event logger. I have chosen two NODE4 entities to try out. One is a workstation, the other a Router. I followed the following procedure: 1. Create node4 bylu08 outbound stream bylv21 remote sink monitor class =0, event type = (9) 2. Create node4 bylr01 outbound stream bylv21 remote sink monitor class =0, event type = (9) 3. Create node4 bylr01 outbound stream bylv21 remote sink monitor class =4, event type = (18) 4. enable opcom messages on a decterm, I can recieve all three events. 5. disable node4 bylv21 local sink monitor 6. set node4 bylv21 local sink monitor name mcc_dna4_evl 7. enable node4 bylv21 local sink monitor 8. notify domain <domain1> events=(counters zeroed), entity list =(node4 bylu08) 9. notify domain <domain2> events=(counters zeroed), entitz list =(node4 bylr01) 10. Both notifications fire when I zero the counters. 11. notify domain <domain2> events=(adjaceny down), entity list =(node4 bylr01 circuit ethernet) Terminates with the following error message: No entities in this domain support the requested events. 12. getevent node4 bylr01 circuit ethernet adjacent node * adjaceny down MCC then waits for an event to occur, I see the event occur on my decterm, but mcc doesn't recieve it. 13. getevent node4 bylr01 I get the an event id missing error although the documenation says this should prompt me with a EVENTS:? Note 1720 talks about event 4.18 causing the MCC_dna4_evl logging process to stop in V1.1. Are there known bugs in t1.2.4 about event 4.18? Thanks in advance, Julie Ann
T.R | Title | User | Personal Name | Date | Lines |
---|---|---|---|---|---|
2207.1 | try these entity specifiers | TOOK::JEAN_LEE | Tue Jan 28 1992 14:34 | 53 | |
Hi, >>8. notify domain <domain1> events=(counters zeroed), entity list =(node4 bylu08) >>9. notify domain <domain2> events=(counters zeroed), entitz list =(node4 bylr01) ^^^^^^ is this a typo? you meant entity, right? If you failed to receive Event counter zeroed or Event automatic counters under a "node4" entity, try this entity specifier: node4 bylu08 remote node bylu08 This is because Node4 sees itself as both the Executor node, and as a Remote Node. Once a node4 has had a connection to itself during the current network session, the counter information is retuned as the Executor Node's view of itself as a remote node. These events are now returned by DECmcc under a remote node entity. >>11. notify domain <domain2> events=(adjaceny down), entity list =(node4 bylr01 >> circuit ethernet) >> Terminates with the following error message: No entities in this domain support the requested events. This is because (adjacency down) is an event under this entity: node4 bylr01 circuit ethernet adjacent node <> >> 12. getevent node4 bylr01 circuit ethernet adjacent node * adjaceny down >> MCC then waits for an event to occur, I see the event occur on >> my decterm, but mcc doesn't recieve it. Yes, a bug related to 4.18 event (adjacency down) is found in V1.2 FT kit. It is already fixed. >> 13. getevent node4 bylr01 >> I get the an event id missing error although the documenation >> says this should prompt me with a EVENTS:? Yes, it should prompt you with this message: Type ? for a list of valid event IDs Event: But if you type CR at this point (maybe, by accident), you will get "event ID is missing" message. Can you try it again, make sure you type ? instead of CR. Hope it helps. Jean | |||||
2207.2 | use config events | TOOK::CALLANDER | MCC = My Constant Companion | Fri Jan 31 1992 10:36 | 7 |
PLEASE NOTE: NOTIFY is having a problem with parsing adjacency down, I am working on the fix. For now please use "any configuration events" to get that one. (thanks to the people in this conference for finding the bug!) |