|
> however the export period now shows 01:00:00 with the show command and
Do you mean that Show Exporting command works but all others (Suspend,
Modify, and Delete) don't?
In this case would you, please, do Show Exporting and Suspend Exporting
and send me (TOOK::SHMUYLOVICH) or put here a result.
> MCC> SUSPEND EXPORT NODE4 PHX25 CIRC FRLNK1-1 - <--------------------|
> export target=dkb300:[mcc_export]mcc_export.rdb |
> |
> Node4 PHX25 Circuit FRLNK1-128KB <-----------------------------------|
> AT 22-JAN-1992 10:18:42 |
|
Is this a mistyping you made when you entered a note or in the |
Suspend Exporting command you specified circuit name as FRLNK1-1? |
> .... Anyway, I have a pretty
> serious problem here and am looking for a way out (exporting circuit
> data every 15 minutes is a good way to fill up disks).
Well, if Show Exporting tells that export period is 1 hour the
easiest thing to do is to kill the background process and start it
again. It will get the new value of the export period.
Please, before doing this send me a result of Show Exporting and one
of the following commands: Modify, Suspend, Delete (Exporting).
Sam S.
|
|
WARNING - This is a private computer system. Unauthorized users will be
prosecuted to the fullest extent of the law.
Username: COMMSYS
Password:
Welcome to VAX/VMS version V5.4-3 on node PHVMCC
Last interactive login on Thursday, 23-JAN-1992 10:50
Last non-interactive login on Thursday, 23-JAN-1992 00:00
Personal Username: COMFORTDA
Personal Password:
Working...
Terminal VT300 on Port RTA1:
%SYSTEM-F-QFNOTACT, disk quotas not enabled on this volume
$ man/ent
DECmcc (V1.1.0)
MCC> show exporting node4 phx25 circuit frlnk1-128kb export target dkb300:[mcc_export]mcc_export.rdb
Node4 phx25 Circuit frlnk1-128kb AT 23-JAN-1992 13:10:01
Exporting parameters are:
Exporting state = ACTIVE,
State since = 21-JAN-1992 10:17:49.70,
Export period = 0 01:00:00.00,
Begin time = 21-JAN-1992 10:17:47.50,
End time = 25-MAY-2012 00:00:00.00,
Export target = "dkb300:[mcc_export]mcc_export.rdb",
Request time = 21-JAN-1992 10:17:47.50,
Requested by = "COMMSYS",
Time of last successful poll = "23-JAN-1992 12:41:54.53",
Number of successful polls = 198,
Time of last failed poll = "NONE",
Last poll failure reason = "N/A",
Number of failed polls = 0,
Last export time = "23-JAN-1992 12:41:54.53",
Time of last export failure = "NONE",
Last export failure reason = "N/A",
Number of export failures = 0,
Sequence name = "EXPORT",
Initial sequence number = 0,
Current sequence number = 198
MCC>
MCC> suspend exporting node4 phx25 circuit frlnk1-128kb export target dkb300:[mcc_export]mcc_export.rdb
Node4 phx25 Circuit frlnk1-128kb AT 23-JAN-1992 13:10:31
The requested operation cannot be completed
Entity Existence Info = Entity Existence Cannot Be Determined
MCC Routine Error = %MCC-E-NOENTITY, no corresponding
entity instance exists
MCC> delete exporting node4 phx25 circuit frlnk1-128kb export target dkb300:[mcc_export]mcc_export.rdb
Node4 phx25 Circuit frlnk1-128kb AT 23-JAN-1992 13:11:04
The requested operation cannot be completed
Entity Existence Info = Entity Existence Cannot Be Determined
MCC Routine Error = %MCC-E-NOENTITY, no corresponding
entity instance exists
MCC> show exporting node4 phx25 circuit frlnk1-128kb export target dkb300:[mcc_export]mcc_export.rdb
Node4 phx25 Circuit frlnk1-128kb AT 23-JAN-1992 13:11:19
Exporting parameters are:
Exporting state = ACTIVE,
State since = 21-JAN-1992 10:17:49.70,
Export period = 0 01:00:00.00,
Begin time = 21-JAN-1992 10:17:47.50,
End time = 25-MAY-2012 00:00:00.00,
Export target = "dkb300:[mcc_export]mcc_export.rdb",
Request time = 21-JAN-1992 10:17:47.50,
Requested by = "COMMSYS",
Time of last successful poll = "23-JAN-1992 12:56:52.28",
Number of successful polls = 199,
Time of last failed poll = "NONE",
Last poll failure reason = "N/A",
Number of failed polls = 0,
Last export time = "23-JAN-1992 12:56:52.28",
Time of last export failure = "NONE",
Last export failure reason = "N/A",
Number of export failures = 0,
Sequence name = "EXPORT",
Initial sequence number = 0,
Current sequence number = 199
MCC>
MCC> SUSPEND EXPORTING NODE4 PHX25 CIRCUIT FRLNK1-128KB EXPORT TARGET DKB300:[MCC_EXPORT]MCC_EXPORT.RDB
Node4 PHX25 Circuit FRLNK1-128KB AT 23-JAN-1992 13:12:05
The requested operation cannot be completed
Entity Existence Info = Entity Existence Cannot Be Determined
MCC Routine Error = %MCC-E-NOENTITY, no corresponding
entity instance exists
MCC> DELETE EXPORTING NODE4 PHX25 CIRCUIT FRLNK1-128KB EXPORT TARGET DKB300:[MCC_EXPORT]MCC_EXPORT.RDB
Node4 PHX25 Circuit FRLNK1-128KB AT 23-JAN-1992 13:12:17
The requested operation cannot be completed
Entity Existence Info = Entity Existence Cannot Be Determined
MCC Routine Error = %MCC-E-NOENTITY, no corresponding
entity instance exists
MCC> MODIFY EXPORTING NODE4 PHX25 CIRCUIT FRLNK1-128KB EXPORT TARGET DKB300:[MCC_EXPORT]MCC_EXPORT.RDB, EXPORT PERIOD 02:00:00
Node4 PHX25 Circuit FRLNK1-128KB AT 23-JAN-1992 13:13:24
The requested operation cannot be completed
Entity Existence Info = Entity Existence Cannot Be Determined
MCC Routine Error = %MCC-E-NOENTITY, no corresponding
entity instance exists
Additionally, this seems to prevent the actual exporting of the
circuit data collect for this circuit, as I cannot generate graphs
for this circuit but can for other ones that I can perform the
nessecary commands. In my case, this circuit (of course) is the
single most critical circuit to record data on.
Sorry it took so long to get this to you.
Dave Comfort
|