| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
I have just now gotten around to installing DECmcc 1.2.4 - This is the
.log file, it is the same error that I had when I tried to install
1.2.3 -
Can someone help me solve my problem?
$ @sys$update:vmsinstal
VAX/VMS Software Product Installation Procedure V5.4
It is 13-JAN-1992 at 14:31.
Enter a question mark (?) at any time for help.
%VMSINSTAL-W-ACTIVE, The following processes are still active:
DNS$TA
DNS$BACK
* Do you want to continue anyway [NO]? yes
* Are you satisfied with the backup of your system disk [YES]?
* Where will the distribution volumes be mounted:
NETMON$DKB100:[000000.DECMCC]
Enter the products to be processed from the first distribution volume
set.
* Products: mccbmst012
* Enter installation options you wish to use (none):
The following products will be processed:
MCCBMST V1.2
Beginning installation of MCCBMST V1.2 at 14:32
%VMSINSTAL-I-RESTORE, Restoring product save set A ...
%VMSINSTAL-I-RELMOVED, Product's release notes have been moved to
SYS$HELP.
************************************************************
* *
* DECmcc BMS T1.2.4 *
* Integrated Package *
* *
* Installation Procedure *
* *
************************************************************
%VMSINSTAL-I-RESTORE, Restoring product save set B ...
DECmcc requires a directory where the DECmcc common files
will be installed. If the logical MCC_COMMON is defined, the
default is for the files to be installed in that directory.
If the logical is not defined, the default is for the files
to be installed in a directory on the system disk called
SYS$COMMON:[MCC]. The installer may override the default.
The target directory for the files as it is now defined is
shown below.
Press RETURN to use the value shown or enter a new disk and
directory specification.
* Target directory for DECmcc Common files [SYS$COMMON:[MCC]]:
* Do you want to run the DECmcc BMS IVP after the installation [YES]?
* Do you want to purge files replaced by this installation [YES]?
The Time Differential Factor (TDF) is the difference between
your time zone and the international standard Coordinated
Universal Time (UTC)
A negative (-) TDF value means that this node is west of UTC
A positive (+) TDF value means that this node is east of UTC
The range is from -12:00 to +13:00. The format is +hh:mm or
-hh:mm with hh indicating the number of hours and mm
indicating the number of minutes. A few examples are:
Eastern Standard Time is -5:00 hours from UTC.
Eastern Daylight Time is -4:00 hours from UTC.
Great Britain, Iceland, Portugal, Upper Volta are
at UTC or 0:0.
Great Britain, Summer Time +1:00 hour from UTC.
Japan is +9:00 hours from UTC.
Using the DECdns TDF as the default TDF
* Time Differential Factor [-6:00]:
DECmcc requires the use of a Name Service for the storage
and retrieval of entity information. It is recommended that
DECdns be used for this purpose. DECdns is used to make
information available network-wide and can be accessed
throughout the network by software such as DECmcc.
Some installation sites may not need or want network-wide
availability for this network entity information. An
example might be a network which has little network entity
information or security relavent information. Also, a
DECdns Server has to be installed on the network otherwise
DECmcc cannot use DECdns as a Name Service.
In such cases, DECmcc provides the capability of making the
Namespace local to the system on which DECmcc is installed.
This option does NOT use the DECdns software for accessing
network-wide Namespace information.
The user may choose only one Name Service. Changing from
one Name Service to another at a later time may require
manual procedures for re-entering entity data.
* Use DECdns as the DECmcc Name Service [YES]?
Using DECdns as the DECmcc Name Service
* Is this correct [YES]?
You must specify the IDP (or network address initial domain
part) for your network. This must either be the default
value of "49::", or a value explicitly allocated for your
network by one of the recognized allocation authorities.
The format is:
afi:idi:
where:
afi = The "authority and format identifier". This is two
decimal digits indicating the IDP allocation
authority
idi = The "initial domain identifier". This is a string of
decimal digits that has been allocated specifically
for your network.
An IDP of "49::" may be used if your network will not be
interconnected with other OSI networks (there is no "idi"
associated with this "afi").
* Initial Domain Part [49::]:
The DECmcc Reports Package consists of files that allow you
to use DATATRIEVE to create reports using data exported from
DECmcc. Please see the Reports Package section of the
DECmcc Performance Analyzer Use manual for information
on using the DECmcc Reports Package with DATATRIEVE.
The Reports package requires 1650 blocks.
* Do you want to install the DECmcc Reports Package [No]? yes
* Target directory for DECmcc Reports files
[SYS$COMMON:[MCC.MCC_REPORTS_FILES]]
:
%VMSINSTAL-I-SYSDIR, This product creates system disk directory
SYS$COMMON:[MCC
.MCC_REPORTS_FILES].
Product: DECMCC-BMS
Producer: DEC
Version: 1.2
Release Date: 22-FEB-1992
* Does this product have an authorization key registered and loaded?
yes
VMSINSTAL asks no additional questions.
%VMSINSTAL-I-RESTORE, Restoring product save set C ...
%VMSINSTAL-I-RESTORE, Restoring product save set D ...
Applying Patch to VMS V5.4 VAXCRTL Run Time Library
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-ECOSET, eco level 3 already set in
VMI$ROOT:[SYSLIB]VAXCRTL.EXE;2
%VMSINSTAL-W-NOFILE, New file VAXCRTL.EXE does not exist.
Following the copying of the files, the DECmcc BMS startup
command procedure(s) will be invoked. Operational tables
will be created by this procedure.
To automatically set up DECmcc BMS on your system,
edit your local system start-up command procedure
SYS$MANAGER:SYSTARTUP_V5.COM
so that it invokes the DECmcc BMS start-up command
procedure. Add:
@SYS$STARTUP:MCC_STARTUP_BMS.COM
after the statement that invokes the DECnet start-up
command file (STARTNET.COM).
NOTE: If you have previously installed the DECmcc DIRECTOR
on this system, you should REMOVE the line:
@SYS$STARTUP:MCC_STARTUP_DIR.COM
from your SYS$MANAGER:SYSTARTUP_V5.COM procedure.
NOTE: The DECdns clerk must also be started up before
the MCC_STARTUP_BMS command procedure is invoked.
Following the DECmcc BMS start-up the DECmcc BMS
postinstallation command procedure will be invoked.
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target
directories...
Beginning DECmcc BMS Postinstallation Procedure ...
Deleting obsolete DECmcc verbs...
The MCC_STARTUP_BMS startup procedure for DECmcc T1.2.4 is now running.
DECmcc (T1.2.4)
MCC 0 ALARMS RULE __dummy_test
AT 13-JAN-1992 14:50:13
Entity created successfully.
MCC 0 ALARMS RULE __dummy_test
AT 13-JAN-1992 14:50:15
Entity deleted successfully.
The MCC_STARTUP_BMS startup procedure for DECmcc T1.2.4 is now ending.
Completing DECmcc BMS Postinstallation Procedure ...
Beginning DECmcc BMS Installation Verification Procedure ...
The IVP for DECmcc BMS will now be run.
DECmcc (T1.2.4)
MCC 0
AT 13-JAN-1992 14:50:27
Test Successful
DECmcc (T1.2.4)
MCC 0 FCL
AT 13-JAN-1992 14:50:35
Test Successful
DECmcc (T1.2.4)
MCC 0 REGISTRATION_FM
AT 13-JAN-1992 14:50:44
Test Successful
DECmcc (T1.2.4)
MCC 0 DNA4_AM
AT 13-JAN-1992 14:50:52
Test Successful
DECmcc (T1.2.4)
MCC 0 DNA5_AM
AT 13-JAN-1992 14:51:01
Test Successful.
DECmcc (T1.2.4)
MCC 0 ICONICMAP
AT 13-JAN-1992 14:51:09
Test Successful
DECmcc (T1.2.4)
%MCC-E-INV_IN_ENTITY, software error: invalid in_entity (input entity)
parameter
%MCC-E-INV_IN_ENTITY, software error: invalid in_entity (input entity)
parameter
The following command failed.
"MANAGE/ENTERPRISE TEST MCC 0 DOMAIN_FM, TO FILE =
MCCBMS$OUT.TXT"
DECmcc BMS T1.2.4 Installation Failed
%MCC-F-FAILED, fatal DECmcc error
*********************************************************
Fatal DECmcc BMS T1.2.4 event occurred during installation
*********************************************************
%VMSINSTAL-E-IVPFAIL, The IVP for MCCBMST V1.2 has failed.
Enter the products to be processed from the next distribution volume
set.
* Products: exit
VMSINSTAL procedure done at 14:52
$ logo
SYSTEM logged out at 13-JAN-1992 14:52:10.84
%REM-S-END, control returned to node _NETMON::
Thanks Dave
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2091.1 | BSYBEE::EGOLF | John C. Egolf LKG2-2/T02 x226-7874 | Mon Jan 13 1992 16:37 | 6 | |
Could you copy and run the audit command file to ensure that your sysgen and process quotas are set up right? BSYBEE:;DUA0:[PUBLIC]MCC_AUDIT.COM | |||||
| 2091.2 | F18::ROBERT | Mon Jan 13 1992 17:12 | 70 | ||
This is the output from the audit_mcc.com file that is dated 8 oct 1991
and is 52 blocks.
$ @AUDIT_MCC.COM
AUDIT_MCC V1.2 13-JAN-1992 16:05:00.85,
on node NETMON::, a VAXstation 3100/GPX, running VMS V5.4
Checking Process Quotas
- No process quotas found to be too small for user SYSTEM
Checking Sysgen Parameters.
- No Active Sysgen parameters found to be too small.
Checking installed images
Checking Disk Space
MCC_COMMON:
SYS$LOGIN:
SYS$SYSDEVICE:
Checking Memory
%DCL-W-USGOTO, target of GOTO not found - check spelling and presence
of label
$ ty AUDIT_00000099.TEMP_MEM_LIST;1
System Memory Resources on 13-JAN-1992 16:05:06.27
Physical Memory Usage (pages): Total Free In Use
Modified
Main Memory (32.00Mb) 65536 42584 21679
1273
Slot Usage (slots): Total Free Resident
Swapped
Process Entry Slots 90 67 23
0
Balance Set Slots 81 60 21
0
Fixed-Size Pool Areas (packets): Total Free In Use
Size
Small Packet (SRP) List 4100 3659 441
112
I/O Request Packet (IRP) List 750 568 182
176
Large Packet (LRP) List 44 34 10
1648
Dynamic Memory Usage (bytes): Total Free In Use
Largest
Nonpaged Dynamic Memory 900096 457808 442288
422624
Paged Dynamic Memory 1000448 580256 420192
576592
Paging File Usage (pages): Free Reservable
Total
DISK$PAGESWAP:[SYSEXE]SWAPFILE.SYS;1 13496 13496
13496
DISK$PAGESWAP:[SYSEXE]PAGEFILE.SYS;1 156183 117091
159992
Of the physical pages in use, 7971 pages are permanently allocated to
VMS.
Everything else is the same as I had it on DECmcc 1.1 -
all my programs are running except decmcc. i.e. dns, and so forth.
Could this be a problem that is caused by my export .rdb file that was
created with the old DECmcc. My DTR info is the same also.
Thanks Dave
| |||||
| 2091.3 | Any old files laying around: | TEMTY::L_GROSSMAN | Wed Jan 15 1992 09:28 | 9 | |
Could you make sure (as stated in some other replies): 1) There are no mcc files in sys$specific:[syslib], sys$specific:[sysexe] 2) There are no process logicals mcc_* 3) Make sure there are no mcc_fdictionary.* files in mcc_specific | |||||
| 2091.4 | F18::ROBERT | Wed Jan 15 1992 09:45 | 50 | ||
I looked in the places you suggested and this is what I found, are you
saying that these should not be there???
$ dir
Directory SYS$SPECIFIC:[SYSLIB]
DNS$LIB.EXE;1 79 24-JUN-1988 16:20:33.91
(RWED,RWED,RWED,RE)
DNS$NS_DEF_FILE.DAT;1
1 6-MAY-1991 15:23:48.21
(RWED,RWED,RWED,R)
MCC_DOMAIN_FM.EXE;1
134 4-NOV-1991 15:28:21.70 (RWED,RWED,RE,)
MCC_DOMAIN_FM.JNL;1
7 4-NOV-1991 15:28:20.66 (RWED,RWED,RE,)
MCC_PA_FM.EXE;1 233 16-OCT-1991 09:55:32.35 (RWED,RWED,RE,)
Total of 5 files, 454 blocks.
$ dir
Directory SYS$SPECIFIC:[SYSEXE]
DNS$BACK.EXE;1 131 9-JUN-1988 16:22:04.32
(RWED,RWED,RWED,RE)
DNS$CONTROL.BIN;1 24 12-OCT-1988 09:35:12.90
(RWED,RWED,RWED,RE)
DNS$CONTROL.EXE;1 94 10-JUN-1988 14:31:25.96
(RWED,RWED,RWED,RE)
DNS$DEFAULT_FILE.DAT;1
1 6-MAY-1991 15:23:50.08
(RWED,RWED,RWED,RE)
DNS$DISPLAY_TREE.EXE;1
146 13-NOV-1987 17:05:17.46
(RWED,RWED,RWED,RE)
DNS$GLOBAL.GBL;1 18 6-MAY-1991 15:23:41.94 (RWED,R,R,R)
DNS$GLOBAL_CACHE.GBL;1
400 6-MAY-1991 15:23:42.39 (RWED,RWED,,)
DNS$ML.EXE;1 74 9-JUN-1988 15:45:28.97
(RWED,RWED,RWED,RE)
DNS$TRANS.EXE;1 96 21-SEP-1988 08:44:57.14
(RWED,RWED,RWED,RE)
I guess I am missing something, doesn't the install procedure put these
files in these places?
Thanks Dave
| |||||
| 2091.5 | F18::ROBERT | Wed Jan 15 1992 10:06 | 8 | ||
I also looked in mcc_specific:*.*
Directory SYS$SPECIFIC:[MCC}
MCC_DNC-SETUP.DEF;3 1 10-SEP-1991 16:12:29.39 (RWED,RWED,re,)
Dave
| |||||
| 2091.6 | F18::ROBERT | Wed Jan 15 1992 12:10 | 5 | ||
I got rid of the mcc* files in the sys$specific: area and the DECmcc
install completed.
Thanks Dave
| |||||
| 2091.7 | F18::ROBERT | Wed Jan 15 1992 12:57 | 11 | ||
I try to use my old map and get the following error,
map file and domain mismatch
entities found in domain but not in map file
do I have to run the autoconfiguration??? So that I do not have to
rebuild my database???
Thanks Dave
| |||||
| 2091.8 | Convert SNMP entities? | TOOK::R_SPENCE | Nets don't fail me now... | Wed Jan 15 1992 17:15 | 5 |
Did you have SNMP entities in the domain?
If so, did you convert them as per the release notes?
s/rob
| |||||
| 2091.9 | F18::ROBERT | Wed Jan 15 1992 20:17 | 7 | ||
Rob,
I did not have SNMP entities, but I will run this tomorrow. I was
going to try this tomorrow. If this does not solve the problem, what
can I do?
Thanks Dave
�
| |||||