| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 2070.1 | We're checking | TOOK::MINTZ | Erik Mintz, DECmcc Development | Wed Jan 15 1992 18:47 | 5 |
| > Do we know if UCX 2.0 will be a supported prereq for the snmp am in V1.2?
It will certainly not be required. We will shortly be testing to find
out if it will be supported.
|
| 2070.2 | so far it works | NSCRUE::KEANE | U.S. NIS Service Development and Delivery | Wed Jan 15 1992 19:35 | 8 |
|
Erik,
I have the first field test of 2.0 ucx running with vms 5.5 and bms t1.2.4.
Haven't done any extensive work with it yet but it all installed and fired up
OK.
Scott
|
| 2070.3 | Thanks | TOOK::MINTZ | Erik Mintz, DECmcc Development | Thu Jan 16 1992 13:24 | 4 |
| Thanks. That is a good indication.
-- Erik
|
| 2070.4 | MCC_TDF logical used by UCX | BIKINI::KRAUSE | European NewProductEngineer for MCC | Wed Jan 22 1992 12:29 | 13 |
| We also run UCX FT 2.0 and I'm able to register a node
running it. But when I do a show snmp... I get no response.
A colleague of mine who is doing the UCX FT is currently
looking into this problem.
Another thing that scared me about UCX 2.0: They use the
logical MCC_TDF for their purpose and define it by
themselves (currently even with a wrong value!). This could
cause severe problems if UCX is started after MCC or you run
UCX$CONFIG while MCC is active. Does anyone in MCCland know
about this ? I asked my colleague to QAR it against UCX.
*Robert
|
| 2070.5 | thanks! | TOOK::CALLANDER | MCC = My Constant Companion | Thu Jan 23 1992 16:28 | 2 |
| thanks, some one will look into this use of tdf.
|
| 2070.6 | Has a QAR been filed at the UCX end? | TOOK::MINTZ | Erik Mintz, DECmcc Development | Mon Jan 27 1992 14:58 | 10 |
| > Another thing that scared me about UCX 2.0: They use the
> logical MCC_TDF for their purpose and define it by
We were not yet aware of this problem. Thank you for pointing it out.
QAR 2223 in MCC_INTERNAL will be used to track it from our end.
> about this ? I asked my colleague to QAR it against UCX.
Has this QAR been file? I can't find anything in the UCX databse on GORGE.
|
| 2070.7 | UCX V2.0 and SNMP AM
| VCSESU::WADE | Bill Wade, VAXc Systems & Support Eng | Tue Apr 21 1992 12:34 | 5 |
| Has there been any further testing with UCX V2.0? I need the DEMFA support that
has been added to V2.0 but not if the SNMP AM doesn't work with it.
Thanks,
Bill
|