[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:	DECmcc user notes file. Does not replace IPMT.
Notice:	Use IPMT for problems. Newsletter location in note 6187
Moderator:	TAEC::BEROUD

Created:	Mon Aug 21 1989
Last Modified:	Wed Jun 04 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	6497
Total number of notes:	27359

2058.0. "BMS T1.2.4 installation fail w/ %MCC-E-INV_HANDLE and %MCC-E-DSPMMLOCFILERR" by CUJO::HILL (Dan Hill-Net.Mgt.-Customer Resident) Thu Jan 09 1992 13:34

When installing DECmcc T1.2.4 on a system which was previously running
DECmcc V1.1, your installation may fail.

If you should encounter something like the following during the
DECmcc T1.2.4 installation, please check the location of image
files corresponding to the module indicated during the IVP portion of the
installation.

In my case, the two errors "%MCC-E-INV_HANDLE" and "%MCC-E-DSPMMLOCFILERR"
resulted from having an old MCC_TCPIP_AM.EXE;5 in SYS$SYSROOT:[SYSLIB]
which was used instead of the newly installed 
SYS$COMMON:[SYSLIB]MCC_TCPIP_AM.EXE;3 .  

RESOLUTION:
	1. Delete the older, higher version from the system specific
	   directory, leaving only the newly installed image file
	   in SYS$COMMON.

	2. From DCL, do the following to rebuild the dispatch table:

		$ @SYS$STARTUP:MCC_TCPIP_STARTUP.COM ENROLL
			(You may substitute the name of 
			 the startup procedure which
			 corresponds to the file causing
			 your problem.)

Many thanks to Erik Mintz and Larry Grossman for saving me time in 
troubleshooting this problem.

-Dan


Portions of installation log:
-------------------------------------------------------------------
	.
	.
	.

   Deleting obsolete DECmcc verbs...


The MCC_STARTUP_BMS startup procedure for DECmcc T1.2.4 is now running.

DECmcc (T1.2.4)

%MCC-E-INV_HANDLE, software error: invalid handle parameter

MCC 0 ALARMS RULE __dummy_test

AT 8-JAN-1992 18:43:58


Entity created successfully.

MCC 0 ALRMS RULE __dummy_test

AT  8-JAN-1992 18:44:01


Entity deleted successfully.


The MCC_STARTUP_BMS startup procedure for DECmcc T1.2.4 is now ending.

   Completing DEmcc BMS Postinstallation Procedure ...

   Beginning DECmcc BMS Installation Verification Procedure ...


   The IVP for DECmcc BMS will now be run.

DECmcc (T1.2.4)

MCC 0
AT  8-JAN-1992 18:44:18

Test Successful

DECmcc (T1.2.4)

	.
	.
	.

MCC 0 ETHERNET_AM
AT  8-JAN-1992 18:45:51

Test successful.

DECmcc (T1.2.4)


%MCC-E-DSPMMLOCFILERR, dispatch local management module file access error during
probe
%MCC-E-DSPMMLOCFILERR, dispatch local management module file access error during
 probe

   The following command failed.

      "MANAGE/ENTERPRISE TEST MCC 0 TCPIP_AM, TO FILE = MCCBMS$OUT.TXT"

   DECMCC BMS T1.2.4 Installation Failed


%MCC-F-FAILED, fatal DECmcc error

   *********************************************************
   Fatal DECmcc BMS T1.2.4 event occurred during installation
   *********************************************************

%VMSINSTAL-E-IVPFAIL, The IVP for MCCBMST V1.2 has failed.

T.R	Title	User	Personal Name	Date	Lines
2058.1	Dispatch error durring enrollment	TEMTY::L_GROSSMAN		`Fri Jan 10 1992 08:15`	3
	There were Old copies of am AM in SYS$SPECIFIC:[SYSEXE]. The installation does not check to se if there are MCC images in sys$specific.