Conference azur::mcc

    Address search method was used.
    

    Running AutoConfig for just one area using the Address search method
    results in the following:
    .
    .
    .
    
    %NCP-F-CONNEC, unable to connect to listener
    -SYSTEM-F-UNREACHABLE, remote node is not currently reachable
    nyws07$dkb0:[sys0.syscommon.][s - Node 8.1023 did not respond.
    Results from 8.1023, 0 circuits, 0 adjacencies, Q size 0...
    nyws07$dkb0:[sys0.syscommon.][s - data collection complete
    nyws07$dkb0:[sys0.syscommon.][s - Time out excepting data from node
    0.0
    Running DECnet Phase IV Autoconfiguration data formatting utility...
    
    
    nyws07$dkb0:[sys0.syscommon.][s
    
     debug flag = 1
     data file name = nyws07$dkb0:[mcc.dna4.hongkong]hongkong.cf
     Horizontal Backbone orientation
     node density = 6.000000
     Starting OID = 25000
     decnet root OID = 9902
    %SYSTEM-F-FLTDIV_F, arithmetic fault, floating divide by zero at
    PC=00001DED, PS
    L=03C00000
    %TRACE-F-TRACEBACK, symbolic stack dump follows
    module name     routine name                     line       rel PC   
    abs PC
    
    MCC_AC_WAN4_MAP load_position_data               3768      00000605 
    00001DED
    MCC_AC_WAN4_MAP main                             2852      00000369 
    000005B1
    %NONAME-W-NOMSG, Message number 00000000
     ...... Failure in formatting DECnet Phase IV Autoconfiguration
    data.
     ... Exiting under error conditions
    Press RETURN to exit>
    
    

	Hello,

	re: 2051.0

    >>nyws07$dkb0:[sys0.syscommon.][s - Frountier Node que is FULL, data
    >>collection stopped
    >>%NONAME-W-NOMSG, Message number 00000000
    >> ...... Failure in gathering DECnet Phase IV Autoconfiguration data.
    >> ... Exiting under error conditions
    >>Press RETURN to exit>

	There is a limit of 2000 entities which can be placed in a domain
	by the DECmcc Autoconfiguration utility.  The error you got
	indicates that you have reached this limit.  Search by address
	queues 1024 addresses per area, so you are effectively limited
	to one area when using that method.
    
        As a rule, we recommend that you do not try to collect data
        for more than one area at a time using DECnet Phase IV
    	Autoconfiguration option 2.

	Granted, the software should exit with a more informative
	message.  We are working to improve the behavior of the 
    	software in this area.

	re: 2051.2

	Were any files created as a result of this run?  I would
	expect the following files to have been created:

	    nyws07$dkb0:[mcc.dna4.hongkong]hongkong.cf1
	    nyws07$dkb0:[mcc.dna4.hongkong]hongkong.cf2

	Could you please post these files?  They will help us to 
	find the source of your problem.  Do you remember if the 
	Q size was ever greater than 0 during this run?  You would
	have seen messages about the Q size written to the screen
	during collection.

	Have you been able to run the utility successfully on any of
	the other areas listed in 2051.0?

	Thank you,
	
	Ulla Figwer 
                                   

    
    Filed QAR #02088, Priority 4 regarding content of 'queue full'
    message.
    
    Thanks for your input,
    
    Ulla

    Ulla,
    
    Here are those files on the Hong Kong run:
    
    NYWS07$DKB0:[MCC.DNA4.HONGKONG]HONGKONG.CF1;2
    
    1 8200 3 QNA-0 1 IBJHK UNKN
    2 8200 3 X25-LDN-IN 1 IBJHK UNKN
    3 8200 3 X25-LDN-OU 1 IBJHK UNKN
    4 8200 3 X25-NYC-IN 1 IBJHK UNKN
    5 8200 3 X25-NYC-OU 1 IBJHK UNKN
    6 8200 3 X25-TKO-IN 1 IBJHK UNKN
    7 8200 3 X25-TKO-OU 1 IBJHK UNKN
    8 30820 3 QNA-0 1 NYSYSA UNKN
    9 30820 3 X25-CHG-IN 1 NYSYSA UNKN
    10 30820 3 X25-CHG-OU 1 NYSYSA UNKN
    11 30820 3 X25-HKB-IN 1 NYSYSA UNKN
    12 30820 3 X25-HKB-OU 1 NYSYSA UNKN
    13 30820 3 X25-LDN-IN 1 NYSYSA UNKN
    14 30820 3 X25-LDN-OU 1 NYSYSA UNKN
    15 30820 3 X25-SPO-IN 1 NYSYSA UNKN
    16 30820 3 X25-SPO-OU 1 NYSYSA UNKN
    17 30820 3 X25-TKO-IN 1 NYSYSA UNKN
    18 30820 3 X25-TKO-OU 1 NYSYSA UNKN
    
    25000 20 9902 IBJHK 0 5.090000 5.045000 0 0 100 0.000000 0.000000
    0.000000 0.000
    000
    25001 20 9902 NYSYSA 0 5.050000 4.915000 0 0 100 0.000000 0.000000
    0.000000 0.00
    0000
    25002 6 9902 Area_8_1 0 4.910000 4.945000 0 0 100 4.818333 4.945000
    5.001667 4.9
    45000
    25003 6 9902 Area_30_1 0 4.950000 5.085000 0 0 100 4.858333 5.085000
    5.041667 5.
    085000
    9902 5 0 DECNET_ROOT 0 4.780000 5.000000 0 0 100 0.000000 0.000000
    0.000000 0.00
    0000
    
    NYWS07$DKB0:[MCC.DNA4.HONGKONG]HONGKONG.CFB;1
    
    
     25004 25002 25000 1 0
     25005 25000 25002 1 0
     25006 25003 25001 1 0
     25007 25001 25003 1 0
    
    NYWS07$DKB0:[MCC.DNA4.HONGKONG]HONGKONG.CFC;1
    
    
    25000 1 25005 1 0 1 X25-TKO-OU NICE  area_8 8.8 0.0
    25001 1 25007 1 0 1 X25-TKO-OU NICE  area_30 30.100 0.0
    
    
    
    Regards,
    Nick
    
    

    
    Hello Nick,
    
    Thanks for the files.  Did you find a HONGKONG.CF2?  If
    so, could you post it here as well?  Your reply in .5 lists
    .CF1, .CFA, .CFB, and .CFC, but no .CF2.
    
    Thanks,
    
    Ulla

    This is all I found in HONGKONG.CF2;2
    
    5 30820
    11 8200
    
    -Nick