| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
I have jsut completed installation of T1.2, and encountered the following
problem extracted from the installation log:
The MCC_STARTUP_BMS startup procedure for DECmcc T1.2.3 is now running.
DECmcc (T1.2.3)
%MCC-E-EVT_POOL_SIZESK, requested event pool size incompatible with existing
po
ol
MCC 0 ALARMS RULE __dummy_test
AT 9-DEC-1991 19:00:57
Software logic error detected
MCC Routine Error = %MCC-E-EVT_POOL_SIZESK, requested
event pool size incompatible with
existing pool
The MCC_STARTUP_BMS startup procedure for DECmcc T1.2.3 is now ending.
Completing DECmcc BMS Postinstallation Procedure ...
Beginning DECmcc BMS Installation Verification Procedure ...
This is installed on a VS3100 running VMS V5.4-3. DECmcc-BMS V1.1 was installed
and was running without errors.
No other problems appeared during the installation.
Paul.
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1901.1 | more questions | TOOK::MINTZ | Erik Mintz | Mon Dec 09 1991 16:26 | 3 |
Which operating system are you using? Have you ever had a previous version of DECmcc installed? | |||||
| 1901.2 | VMS V5.4-3... | HAZARD::BAKER | Paul Baker, UK Product and Technology Group - 844 3311 | Mon Dec 09 1991 18:16 | 6 |
Erik, I'm running VMS V5.4-3 on a VS3100. I was running V1.1 SSB version with all optional AMs installed. Paul. | |||||
| 1901.3 | DECmcc processes running during the install??? | TOOK::T_HUPPER | The rest, as they say, is history. | Tue Dec 10 1991 10:26 | 10 |
If any old V1.1 DECmcc processes were running at the time of the
installation, you would see this error. The event memory pool has
changed for V1.2, and the 1st error encountered is the difference in
size. Perhaps a better 1st error would be event pool version skew.
Our current installation does not stop or check for all currently
running DECmcc processes. Likely suspects are V1.1 alarms processes
running in batch. Could this have been the case?
Ted
| |||||
| 1901.4 | Getting rid of the V1.1 left overs fixed the problem | HAZARD::BAKER | Paul Baker, UK Product and Technology Group - 844 3311 | Fri Dec 13 1991 08:13 | 8 |
Ted, Erik, Many thanks for your help. Getting rid of the old V1.1 left overs fixed the problems. I still had alarms and the TSAM running. Paul. | |||||