[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:	DECmcc user notes file. Does not replace IPMT.
Notice:	Use IPMT for problems. Newsletter location in note 6187
Moderator:	TAEC::BEROUD

Created:	Mon Aug 21 1989
Last Modified:	Wed Jun 04 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	6497
Total number of notes:	27359

1881.0. "IMPM T1.2.3 Problems" by VINO::LUNDGREN (John - NAS System Mgmt - 297-5537) Thu Dec 05 1991 12:41

After installing both the T1.2.3 BMS and TK successfully,
I attempted to invoke the IMPM. I get the following messages:

(In DECterm window)

    No input bitmaps found for COLLECTOR
    No input bitmaps found for CONCENTRATOR

(In DECwindows popups)

    o Map Window Message: software error; application ID not
      found in Window Table property

    o DECmcc Message: Window Table property corrupted. Please exit
      DECmcc and try again.

I have tried again and get the same results.

-John

T.R	Title	User	Personal Name	Date	Lines
1881.1	Questions	TOOK::MINTZ	Erik Mintz	`Thu Dec 05 1991 14:38`	3
	Is this VMS or ULTRIX? Have you ever installed a previous version of the V1.2 field test on the same system?
1881.2	System is VMS	VINO::LUNDGREN	John - NAS System Mgmt - 297-5537	`Thu Dec 05 1991 14:42`	5
	>>Is this VMS or ULTRIX? Have you ever installed a previous >>version of the V1.2 field test on the same system? This is VMS V5.5. I have never installed a previous version of V1.2. However I did have the SSB of V1.1 BMS and TK installed previously.
1881.3	My old resource file is causing the problem	VINO::LUNDGREN	John - NAS System Mgmt - 297-5537	`Thu Dec 05 1991 15:28`	6
	Erik, My problem seems to be with the SYS$LOGIN:MCC_RESOURCE.DAT file that I had with the SSB of V1.1. I will send you this file via mail. -John
1881.4	Entered as QAR 1777	TOOK::MINTZ	Erik Mintz	`Thu Dec 05 1991 15:37`	3
	Thank you for the report. This note (and the mail) have been entered as QAR 1777
1881.5	Missing alarms color	POLE::D_WONG	David Wong @LKG 2-2	`Fri Dec 06 1991 13:01`	19
	John, The problem is caused by having the alarm color entries with no color associated with them. Did you edit your mcc_resource.dat to take out the alarm colors? Each alarms should have a color specified. \david. Excerpt from your mcc_resource.dat: mcc_pml.map_alarmCritical: Red << this one is fine mcc_pml.map_alarmMajor: << mcc_pml.map_alarmMinor: << mcc_pml.map_alarmWarning: << missing color mcc_pml.map_alarmClear: << mcc_pml.map_alarmIndetermine: <<
1881.6	DECmcc V1.1 wrote out the file	YQUEM::LUNDGREN	John - NAS System Mgmt - 297-5537	`Fri Dec 06 1991 16:57`	6
	David, Whatever was in my resource file was put there by DECmcc V1.1. I have never edited this file directly. -John