| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
Hello,
I'm using DECmcc 1.1 to monitor a network made by eight DEMSA x25
routers.
These routers are all connected on the same LAN, they all have only
one line (X25-0) connected to the PSI network and we run several DLMs
over these lines.
When I try to setup the speed for the lines in order to use the PA
module I get this error:
INTERNAL ERROR IN DECNET PHASE IV AM
MCC ERROR %MCC-E-NOENTITY
no corresponding entity instance exists.
This error only happens on three out of eight routers and the only
difference I can see between them is that these 3 routers have more
DLM defined (nearly forty each) than the others five.
I could not delete DLM from the 3 routers since they are running in
a production enviroment so I cannot prove my statement.
Is there any known problem related with the number of entities a decnet
phase iv node can handle?
thanks in advance
and regards
giovanni b
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1859.1 | Check the registration of those lines | TOOK::JESURAJ | Wed Jan 08 1992 13:53 | 30 | |
Hope it is not toooooooo late to answer this note:
> When I try to setup the speed for the lines in order to use the PA
> module I get this error:
> INTERNAL ERROR IN DECNET PHASE IV AM
> MCC ERROR %MCC-E-NOENTITY
> no corresponding entity instance exists.
There is a known bug in DECmcc V1.1: If the line is not registered we get
this error message (This bug has been fixed in V1.2.)
Could you check whether these lines are regsitered properly by using
MCC> DIR NODE4 <XXXX> LINE <YYYY>
If they are not registered, please register them using
MCC> REGISTER NODE4 <XXXX> LINE <YYYY>.
and then try setting the line speeds.
/Jesuraj
| |||||