[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:DECmcc user notes file. Does not replace IPMT.
Notice:Use IPMT for problems. Newsletter location in note 6187
Moderator:TAEC::BEROUD
Created:Mon Aug 21 1989
Last Modified:Wed Jun 04 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:6497
Total number of notes:27359

1849.0. "ONCE MORE PAST TIME AND STATISTICS" by TAV02::KALAI () Sun Nov 24 1991 08:42

	Past time statistics works fine with circuit but not with line
any idea why?
	1. Line speed is set corectly.
_____________________________________________
Node4 51.30 Line SYN-3 
AT 24-NOV-1991 14:52:34 Characteristics

Examination of Attributes shows:
                                 Device = SYN-3
                        Receive Buffers = 64
                             Controller = Normal
                                 Duplex = Full
                               Protocol = DDCMP Point
                                  Clock = External
                          Service Timer = 20000 Milliseconds
                       Retransmit Timer = 5000 Milliseconds
                             Line Speed = 64000
___________________________________________________
	2.	Recording was successfully set up
______________________________________________
Node4 ISROUT Line SYN-3 
AT 24-NOV-1991 14:53:40 


Recording parameters for the partition "Counters" :
                        Recording state = ACTIVE,
                            State since = 24-NOV-1991 11:38:25.63,
                         Polling period = 0 00:15:00.00,
                             Begin time = 24-NOV-1991 11:38:16.42,
                               End time = 25-MAY-2012 00:00:00.00,
                               Keep age = 45 00:00:00.00,
                           Request time = 24-NOV-1991 11:38:16.42,
                           Requested by = "KALAI",
           Time of last successful poll = "24-NOV-1991 14:53:31.01",
             Number of successful polls = 14,
               Time of last failed poll = "NONE",
               Last poll failure reason = "N/A",
                 Number of failed polls = 0,
        Last historical expiration time = "24-NOV-1991 14:53:31.01",
        Time of last expiration failure = "NONE",
         Last expiration failure reason = "N/A",
          Number of expiration failures = 0

Node4 ISROUT Line SYN-3 
AT 24-NOV-1991 14:53:47 

Recording parameters for the partition "Characteristics" :
                        Recording state = ACTIVE,
                            State since = 24-NOV-1991 13:11:44.17,
                         Polling period = 1 00:00:00.00,
                             Begin time = 24-NOV-1991 13:11:39.97,
                               End time = 25-MAY-2012 00:00:00.00,
                               Keep age = 45 00:00:00.00,
                           Request time = 24-NOV-1991 13:11:39.97,
                           Requested by = "KALAI",
           Time of last successful poll = "24-NOV-1991 13:11:50.40",
             Number of successful polls = 1,
               Time of last failed poll = "NONE",
               Last poll failure reason = "N/A",
                 Number of failed polls = 0,
        Last historical expiration time = "24-NOV-1991 13:11:50.40",
        Time of last expiration failure = "NONE",
         Last expiration failure reason = "N/A",
          Number of expiration failures = 0
	
______________________
	And still
_____________________________
mcc>sho node4 ISROUT LINE SYN-3 ALL STATISTICS , FOR START (13:15) - 
_MCC>UNTIL 14:30 EVERY 00:15 , IN DOMAIN ISRAEL

Node4 ISROUT Line SYN-3 
AT 24-NOV-1991 13:30:00 Statistics

Line speed not set. Please set speed and reissue directive.
____________________________________
FOR THE CIRCUIT IT IS WORKING
_________________________________
Node4 ISROUT Circuit SYN-3 
AT 24-NOV-1991 13:30:00 Statistics

Examination of Attributes shows:
                               Duration = 900 Seconds
                   Outbound Utilization = 17.03 Percent
                    Inbound Utilization = 76.8 Percent
            Average Outbound Block Size = 177.3 Bytes
             Average Inbound Block Size = 448.06 Bytes
                    Outbound Block Rate = 7.27 Blocks/Sec
                     Inbound Block Rate = 13.41 Blocks/Sec
                   Outbound Packet Rate = 7.26 Packets/Sec
                    Inbound Packet Rate = 13.41 Packets/Sec
       Originating Packets Sent Percent = 0
   Terminating Packets Received Percent = 0
                      Outbound Overhead = 0.23 Percent
                       Inbound Overhead = 5.000000E-02 Percent
       Outbound Congestion Loss Percent = 0
        Inbound Congestion Loss Percent = -- Invalid Value
                 Count of Circuits Down = 0
Count of Circuit Initialization Failures = 0
          Count of Local Reply Timeouts = 0
         Count of Remote Reply Timeouts = 0
  Count of Circuit Outbound Data Errors = 0
   Count of Circuit Inbound Data Errors = 0
           Count of Local Buffer Errors = 0
          Count of Remote Buffer Errors = 0
            Count of Selection Timeouts = 0
                          Error Percent = 0
    Count of Forwarding Congestion Loss = 0

Node4 ISROUT Circuit SYN-3 
AT 24-NOV-1991 13:45:00 Statistics

Node4 ISROUT Circuit SYN-3 
AT 24-NOV-1991 14:00:00 Statistics

Node4 ISROUT Circuit SYN-3 
AT 24-NOV-1991 14:15:00 Statistics

Node4 ISROUT Circuit SYN-3 
AT 24-NOV-1991 14:30:00 Statistics
Examination of Attributes shows:


	I search all over the notes, verify every thing byt nothing change I
still got the pb. with ddcmp and ethernet lines.

any idea to help me

Thanks in advance
Yael Kalai     
T.RTitleUserPersonal
Name
DateLines
1849.1Circuit counters?TOOK::ANWARUDDINAnwarMon Nov 25 1991 14:4610
Have you recorded circuit SYN-3 counters for the the same time period?
I see you have circuit statistics but I wasn't sure if the recording
was for the same time period. 

Line statistics requires Line counters, Line characteristics & counters
for all circuits on that line, in this case SYN-3 counters.

If you have recorded circuit SYN-3 counters you may want to  try SHOWing
Line statistics for a later time period.

1849.2DNS Problems??TAV02::KALAITue Nov 26 1991 03:3812
	RE.1
 I did try different time period, I have counters and characteristics for
line syn-3 and circuit syn-3.
I suspect  DNS problems but I did try 2 forms of registration:

	- from FCL with MCC_DNS_SETUP.COM , with entity DNA_NODE.ISROUT  .
	- from iconic map , with entity .ISROUT.

   The same result always "Line speed not set ,please.."

any other ideas???
1849.3Could be another problem.TOOK::ANWARUDDINAnwarTue Nov 26 1991 09:076
re .2

One more thing you might try. Please SHOW CIRCUIT and LINE counters for
the time period you have used on the SHOW STATISTICS. I have a feeling
it's some other problem that is being reported incorrectly as Line speed
not set.