| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
Hi, I have came across a problem in using the PA to display statistics for a serial circuit of the DECrouter 250 (i.e. circuit SERIAL-1). However, it works fine for the ethernet circuit of this router (i.e. circuit ETHER-1) The error is followed, "No counters in counter attribute partition" Can someone please confirm that if this is a limitation of the PA or something I have missed. Thanks Thien Doan
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1727.1 | Known problem. Will be fixed. | TOOK::ANWARUDDIN | Anwar | Tue Oct 29 1991 13:39 | 2 |
There is a problem with getting statistics for routers that support single links only. I think there is a note to that effect in this conference. | |||||
| 1727.2 | RECORD for past stats ok | PATS::WOODCOCK | Mon Nov 04 1991 10:41 | 10 | |
Thien, If you haven't already tried, RECORD the Circuit Counters/Char and Line Char. You will then be able to get PAST time STATS so this isn't a complete bust for your customer. I've tried it and the only problems I had were that the polls seemed to fail at a greater frequency, but if the counters are there, all works well. best regards, brad... | |||||