| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
We are running BMS v1.1 w/ELM and are getting the following error message when attempting to access a Terminal Server (DS550) - "No Useable Service Circuits". Specifically, this message comes up when trying to expand the "Port...", or "Device..." options while using the DECwindows interface. The same occurence exists with using the character cell interface. Thanks in advance, Steve Frewin
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1647.1 | more information | TOOK::L_CARDANI | Wed Oct 16 1991 16:36 | 14 | |
A few things to check...
Does the service circuit registered in TS AM for the server match a
service circuit on the host? (SHOW TERMINAL_SERVER ts SERVICE CIRCUIT
for the terminal server, SHOW NODE4 host CIRCUIT * for the host).
Can you reach the server's remote console any other way? (NCP connect,
TSM if you have it)
Do you have any other servers, if so can you expand their port entity?
Did you ever try this before the ELMS AM was installed?
- Linda
| |||||
| 1647.2 | No Useable Service Circuits - Solution | MTITAN::FREWIN | Operating At The Speed Of Light | Thu Oct 17 1991 17:08 | 7 |
After reviewing the service circuit for the terminal servers we have
determined that the error message was caused by moving from a UNA to a
BNA on the MCC host. We have updated all the Terminal Servers so that
they now see the BNA.
Thanks for your help,
Steve
| |||||