[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
|
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
1625.0. "PA: Line Speed Set???" by LUVBOT::MCC () Wed Oct 09 1991 10:56
Hi there,
I have been running MCC procedures which contain PA commands (72) each
night and they were running ok until this week. The last five commands
now state "Line Speed Not Set". Trying them individually directly from
command line also shows the same problem. But line speed IS set (and I
even reset it to no avail). And the recording looks ok to me. Are there
any helpful hints out there to get over this hump??
best regards,
brad...
...........................................................................
show node4 BBZK05 circuit SYN-1 inb util,outb util,count of for cong loss,-
for start 08-oct-1991:8:0 every 11:0 until 08-oct-1991:19:0 dur 11:0,-
in doma .ZKO-2
!
!Node4 BBZK05 Circuit SYN-1
!AT 8-OCT-1991 19:00:00 Statistics
!
!Line speed not set. Please set speed and reissue directive.
!
..............................................................................
show node4 bbzk05 line syn-1 line speed
!
!Node4 2.53 Line syn-1
!AT 9-OCT-1991 09:39:30 Characteristics
!
! Line Speed = 384000
!
.............................................................................
show recording node4 bbzk05 line syn-1 part=*,in domain .zko-2
!
!Node4 bbzk05 Line syn-1
!AT 9-OCT-1991 09:40:01
!
!Recording parameters for the partition "Characteristics" :
! Recording state = ACTIVE,
! State since = 23-JUL-1991 12:07:29.53,
! Polling period = 1 00:00:00.00,
! Begin time = 23-JUL-1991 12:07:25.65,
! End time = 25-MAY-2012 00:00:00.00,
! Keep age = 45 00:00:00.00,
! Request time = 23-JUL-1991 12:07:25.65,
! Requested by = "MCC",
! Time of last successful poll = " 9-OCT-1991 09:34:08.34",
! Number of successful polls = 66,
! Time of last failed poll = "28-SEP-1991 07:58:17.67",
! Last poll failure reason = "failed to call ETP",
! Number of failed polls = 8,
! Last historical expiration time = " 9-OCT-1991 09:34:08.34",
! Time of last expiration failure = "NONE",
! Last expiration failure reason = "N/A",
! Number of expiration failures = 0
!
exit
!
| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 1625.1 | circuit counters, not line speed | JETSAM::WOODCOCK | | Wed Oct 09 1991 11:30 | 12 |
| Hi again,
I think the problem has been solved but I would say MCC has a bug. I found I
could get stats going forward in time. Then I checked for line speed and
was successful for the past three days. So I checked the other
recordings running. I found the **CIRCUIT COUNTERS** recording suspended.
MCC stating that the LINE SPEED (LINE CHARACTERISTIC) isn't set is quite
misleading and this problem could have been resolved much quicker given
the correct error condition.
best regards,
brad...
|