| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
Recently, I have completed an installation MCCEMS V2.0, MCCBMSV1.1,
MCCDIR V1.1 and DNS V1.1. Unfortunately, I tried to register a node it
complaining "%DNS-E-UNKNOWNENTRY, Requested entry does not exist"
What could have gone wrong?
Any help will be appreciated.
George.
Attached ..................................................................
****************************** MCC node ***********************************
MCC> REGISTER NODE4 telecom:.MCC.PCS001 SYNONYM PCS001
Node4 TELECOM:.MCC.PCS001
AT 4-OCT-1991 13:51:18
The requested operation cannot be completed
MCC Routine Error = %DNS-E-UNKNOWNENTRY, Requested entry
does not exist
MCC> CREATE DOMAIN MMTS
Domain TELECOM:.MMTS
AT 4-OCT-1991 13:51:45
The requested operation cannot be completed
MCC Unhandled Service Reply = The requested operation cannot be
completed
MCC Routine Error = %DNS-E-NOCOMMUNICATION, Unable to
communicate with DNS server
MCC> show node4 pcm501 all status
Node4 10.351
AT 4-OCT-1991 13:54:00 Status
Examination of Attributes shows:
State = On
Physical Address = AA-00-04-00-5F-29
Active Links = 2
Delay = 1
MCC> show node4 pcm001 all status
Node4 10.301
AT 4-OCT-1991 13:59:37 Status
Examination of Attributes shows:
State = On
Physical Address = AA-00-04-00-2D-29
Active Links = 2
Delay = 2
PCM501$MCCUSER %$ sh log mcc*
(LNM$PROCESS_TABLE)
(LNM$JOB_80987110)
(LNM$GROUP_000400)
(LNM$SYSTEM_TABLE)
"MCC$CREATE" = "$2$DIA2:[MCCUSER.CREATE]"
"MCC$DEVICE" = "$2$DIA1:"
"MCC$LOG" = "$2$DIA2:[MCCUSER.LOG]"
"MCC$OPER" = "$2$DIA2:[MCCUSER.OPER]"
"MCC$RDB" = "$2$DIA2:[MCCUSER.RDB]"
"MCC$REGISTER" = "$2$DIA2:[MCCUSER.REGISTER]"
"MCC_COMMON" = "MCC$DEVICE:[MCC]"
"MCC_ICONS" = "MCC_COMMON"
"MCC_MAPS" = "SYS$DISK:[]"
= "MCC_COMMON"
"MCC_NODE_IDP" = "49::"
"MCC_REPORTS_FILES" = "MCC$DEVICE:[MCC.MCC_REPORTS_FILES]"
"MCC_SPECIFIC" = "SYS$SPECIFIC:[MCC]"
"MCC_SYSTEM" = "MCC_SPECIFIC"
= "MCC_COMMON"
"MCC_TDF" = "+7:30"
"MCC_UIL" = "MCC_COMMON"
(DECW$LOGICAL_NAMES)
PCM501$MCCUSER %$ sh sys
VAX/VMS V5.4-2 on node PCM501 4-OCT-1991 13:56:44.17 Uptime 0 03:45:34
Pid Process Name State Pri I/O CPU Page flts Ph.Mem
21600081 SWAPPER HIB 16 0 0 00:00:02.94 0 0
21600102 DECW$WM_1 LEF 7 41 0 00:00:09.88 1424 1631
21600086 CONFIGURE HIB 10 22 0 00:00:00.16 111 172
21600088 ERRFMT HIB 8 155 0 00:00:00.89 85 128
21600089 CACHE_SERVER HIB 16 6 0 00:00:00.03 64 102
2160008A CLUSTER_SERVER HIB 10 10 0 00:00:00.24 123 225
2160008B OPCOM HIB 7 48 0 00:00:00.37 266 139
2160008C AUDIT_SERVER HIB 10 50 0 00:00:00.87 1373 384
2160008D JOB_CONTROL HIB 10 212 0 00:00:01.00 528 618
2160008E SMISERVER HIB 9 34 0 00:00:00.50 275 409
2160010F MCCUSER_10F LEF 6 137 0 00:00:02.52 1835 1910
21600090 DECW$SERVER_0 HIB 6 8217 0 00:02:58.81 7182 1891
21600111 DECW$TE_1 LEF 6 19813 0 00:03:40.63 4753 3097
21600092 NETACP HIB 10 8842 0 00:00:11.37 209 395
21600093 REMACP HIB 9 22 0 00:00:00.08 78 54
21600094 LATACP HIB 14 8 0 00:00:00.20 226 175
21600095 RDMS_MONITOR LEF 15 284 0 00:00:01.60 617 51
21600096 DNS$ADVER HIB 4 11234 0 00:00:53.31 206 308
21600097 ELMS$NIMUX HIB 6 36 0 00:00:00.54 302 576
21600118 MCCUSER_118 HIB 4 3019 0 00:00:23.91 6309 447
21600119 MCCUSER_119 LEF 9 5374 0 00:01:09.20 42465 465
2160011A MCCUSER_11A CUR 4 3268 0 00:00:22.40 6790 411
2160011B MCCUSER_11B HIB 4 5779 0 00:00:50.12 7240 3640
2160011E MCCUSER_11E HIB 5 4119 0 00:00:40.96 26281 457
2160011F SYSTEM_11F HIB 8 5411 0 00:00:32.01 7843 451
21600120 MKA500CACP HIB 9 10 0 00:00:00.10 79 103
216000D9 MCCUSER LEF 4 135 0 00:00:47.50 3192 2112
********************************** DNS Server ******************************
PCM001$SYSTEM %$ sh sys
VAX/VMS V5.4-2 on node PCM001 4-OCT-1991 13:57:07.96 Uptime 0 03:48:56
Pid Process Name State Pri I/O CPU Page flts Ph.Mem
21400101 SWAPPER HIB 16 0 0 00:00:00.69 0 0
21400106 CONFIGURE HIB 10 27 0 00:00:00.11 108 172
21400108 ERRFMT HIB 8 153 0 00:00:00.99 84 127
21400109 CACHE_SERVER HIB 16 14 0 00:00:00.07 63 101
2140010A CLUSTER_SERVER HIB 10 10 0 00:00:00.20 122 281
2140010B OPCOM HIB 7 308 0 00:00:01.79 348 180
2140010C AUDIT_SERVER HIB 10 79 0 00:00:00.91 1361 429
2140010D JOB_CONTROL HIB 8 583 0 00:00:04.98 684 698
2140010E SMISERVER HIB 9 38 0 00:00:00.48 272 490
21400114 LATACP HIB 14 8 0 00:00:00.17 253 155
21400115 SYMBIONT_0001 HIB 5 1818 0 00:00:00.40 300 128
2140011B SYMBIONT_0002 HIB 6 693 0 00:00:00.72 480 574
2140011C SYMBIONT_0003 HIB 4 30 0 00:00:00.33 356 294
2140011D SYMBIONT_0004 HIB 4 30 0 00:00:00.39 356 294
2140012C NETACP HIB 10 3228 0 00:00:25.34 307 474
2140012D EVL HIB 6 126 0 00:00:00.68 2652 58 N
2140012E LES$ACP HIB 10 123 0 00:00:01.64 359 553
2140012F REMACP HIB 9 20 0 00:00:00.07 78 54
21400138 SYSTEM_138 LEF 4 26379 0 00:05:55.95 205087 258
2140013A DNS$ADVER HIB 4 1534 0 00:00:03.39 220 307
2140013D DNS$TA HIB 4 6853 0 00:00:26.78 723 1161
2140013E DNS$BACK HIB 6 2082 0 00:00:18.10 688 968
21400143 SYSTEM_143 CUR 4 140 0 00:00:01.06 724 294
PCM001$SYSTEM %$
DNS> show nameserver
Namespace name _____________________ telecom
Name Server state __________________ On
UID ________________________________ aa-00-04-00-2d-29-a0-54-8a-08-8f-f9-94-00
Timezone ___________________________ 08:00 hours
Incompatible request _______________ 0
Time went backwards ________________ 0
DNS> show know clear
Clearinghouse name _________________ pcmclu_ch
Clearinghouse state ________________ On
Clearinghouse filename _____________ SYS$SPECIFIC:[DNS$SERVER]pcmclu_ch.DNS
RMS buffer count ___________________ 3
Directories in this clearinghouse __ 75
UID ________________________________ aa-00-04-00-2d-29-60-ef-e8-08-8f-f9-94-00
DNS> show dir . know child
DNS> show dir . known child
Child ______ BRIDGE
Child ______ DNA4
Child ______ DNA_BackTranslation
Child ______ DNA_Node
Child ______ DNA_NodeSynonym
Child ______ DTSS_GlobalTimeServers
Child ______ MCC
Child ______ MCC_Bridge_BackTranslation
Child ______ MCC_Station_BackTranslation
Child ______ STATION
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1597.1 | did you @MCC_DNS_SETUP? | BSYBEE::EGOLF | John C. Egolf LKG2-2/T02 x226-7874 | Fri Oct 04 1991 08:48 | 8 |
Did you run the DNS setup command file after installing DECmcc BMS and DNS? I suggest you take a look at BSYBEE::DUA0:[PUBLIC]FULLINSTALL.PS (if you have an LPS40, I suggest you print two pages per paper) JCE | |||||
| 1597.2 | Keep it up! | ZPOVC::GEORGEKOH | Fri Oct 04 1991 10:24 | 5 | |
Yes, I did John. As you can see in my attach copy in "***DNS SERVER***"
Thanks John for your response and documentation.
Cheers.
| |||||
| 1597.3 | KAOT01::S_HYNDMAN | Fri Oct 04 1991 11:42 | 10 | ||
You might want to try executing sys$manager:dns$change_def_file.com
to make sure your pointing to the proper name server and look for
dns events for errors.
Just some thoughts
Scott
| |||||
| 1597.4 | Still sounds like DNS | TOOK::R_SPENCE | Nets don't fail me now... | Mon Oct 07 1991 13:29 | 8 |
Are all the backtranslation child directories present?
Do you have write (and read etc) access to the directories in DNS?
Are the ACEs on the DNS directory entries set up to propagate correct
access to child directories and objects?
s/rob
| |||||
| 1597.5 | F18::ROBERT | Tue Feb 18 1992 12:04 | 166 | ||
I am having a similar problem, this is the log file.
B52_DECMCC>ty/p MCC_RPTS_NODE4_NODE_TRAFFIC_DTR.LOG;1
$ SET NOON
$ VERIFY = F$VERIFY(0)
$!
$!************************************************************* RWB
1/31/91
$! Set The DCL Prompt to the Node Name and User Name
$! ************************************************************
$!
$ node = f$getsyi("NODENAME")
$ if node .eqs. "" then -
$ node = f$trnlnm("SYS$NODE") - "_" - "::"
$ name = f$edit(f$getjpi("","USERNAME"),"COLLAPSE")
$ prompt = node + "_" + name + ">"
$ if (f$mode() .eqs "INTERACTIVE") then set prompt = &prompt
$!
$ exit
$!
$! This command procedure is a framework for building an individual
$! login command procedure. It is executed every time that you log
$! into your account.
$!
$ define cdd$default cdd$top.decmcc
$ define dmc $4$dus5:[decmcc]
$ define db $4$dus5:[build]
$ define dp $4$dus5:[decmcc.PATCHES]
$ define exp $4$dus5:[decmcc.EXPORT]
$ define expo $4$dus5:[decmcc.EXPORT.old]
$ define m_h mcc_historian
$ define m_e mcc_exporter
$ define m_h_c $4$dus5:[decmcc.export]mcc_historian_background.com
$ define m_e_c $4$dus5:[decmcc.export]mcc_exporter_background.com
$!
$ IF F$MODE() .NES. "INTERACTIVE" THEN GOTO ENDINTER
$ENDINTER:
$ IF F$MODE() .NES. "BATCH" THEN GOTO ENDBATCH
$!
$! Put commands you want executed only in batch mode between this
comment
$! and the "ENDBATCH:" symbol.
$!
$
$ENDBATCH:
$!
$! Put commands that you want executed in any mode of login below.
$!
$
$!mcc_rpts_node4_node_traffic_dtr.com
$!************************************************************
$! Copyright (c) Digital Equipment Corporation, 1990
$! All Rights Reserved. Unpublished rights reserved
$! under the copyright laws of the United States.
$!
$! The software contained on this media is proprietary
$! to and embodies the confidential technology of
$! Digital Equipment Corporation. Possession, use,
$! duplication or dissemination of the software and
$! media is authorized only pursuant to a valid written
$! license from Digital Equipment Corporation.
$!
$! RESTRICTED RIGHTS LEGEND Use, duplication, or
$! disclosure by the U.S. Government is subject to
$! restrictions as set forth in Subparagraph (c)(1)(ii)
$! of DFARS 252.227-7013, or in FAR 52.227-19, as
$! applicable.
$!************************************************************
$!***************************************************************************
$! This command procedure is submitted by
mcc_rpts_node4_node_traffic.com
$! This procedure is submitted with four parameters.
$!********************************
$!
$define mcc$node1 "34.380"
$define mcc$date1 "18-FEB-1992 09:00:00.00"
$define mcc$date2 "19-FEB-1992 09:00:00.00"
$define mcc$report_file "N_N_T_B52.RPT"
$datatrieve
VAX DATATRIEVE V5.1
Digital Query and Report System
Type HELP for help
:node4_node_traffic_rPT
Unable to start a relational database transaction, finishing all
relational doma
ins.
%RDB-F-SYS_REQUEST, error from system services request
-SORT-F-SYSERROR, system service error
-SYSTEM-F-FORCEDERROR, forced error flagged in last sector read
"MCC_NODE4" is not a readied source, collection, or list.
"CURRENT" is not a readied source, collection, or list.
"CURRENT" is not a readied source, collection, or list.
exit
DECMCC job terminated at 18-FEB-1992 11:00:40.52
Accounting information:
Buffered I/O count: 198 Peak working set size:
4359
Cancel RPTS_NODE4_NODE_TRAFFIC_DTR (queue JIAWG, entry 622) completed
B52_DECMCC>
This is the trace registration .log file from [decmcc.dna4.jiawg]
B52_DECMCC>ty/p TRACE_REGISTRATION.LOG;2
DECmcc (T1.2.4)
Domain B52_NS:.MCC.DOMAIN.jiawg_Multi_Area_1_1
AT 18-FEB-1992 09:16:59
The requested operation cannot be completed
MCC Unhandled Service Reply = The requested operation
cannot be
completed
MCC Routine Error = %DNS-E-UNKNOWNENTRY,
Requested entry
does not exist
Node4 B52_NS:.DNA_Node.ATFJ01
AT 18-FEB-1992 09:17:01
The entity is already registered with MCC.
Domain B52_NS:.MCC.DOMAIN.jiawg_Multi_Area_1_1
AT 18-FEB-1992 09:17:06
No such entity: Domain B52_NS:.MCC.DOMAIN.jiawg_Multi_Area_1_1
Unknown Entity = Domain
No such entity: Domain B52_NS:.MCC.DOMAIN.jiawg_Multi_Area_1_1
Unknown Entity = Domain
B52_NS:.MCC.DOMAIN.jiawg_Mult
i_Area_1_
1
Node4 B52_NS:.DNA_Node.B52
AT 18-FEB-1992 09:17:07
The entity is already registered with MCC.
Domain B52_NS:.MCC.DOMAIN.jiawg_Multi_Area_1_1
AT 18-FEB-1992 09:17:08
No such entity: Domain B52_NS:.MCC.DOMAIN.jiawg_Multi_Area_1_1
Unknown Entity = Domain
B52_NS:.MCC.DOMAIN.jiawg_Mult
i_Area_1_
1
DECmcc (T1.2.4)
Domain B52_NS:.MCC.DOMAIN.jiawg
I have loaded all of the software and installed dns and put in the info
from reports use documents, i.e. datatrieve record definitions.
What did I miss?
I am confused.
Thanks Dave
| |||||
| 1597.6 | Hardware error? | TOOK::R_SPENCE | Nets don't fail me now... | Tue Feb 18 1992 14:10 | 5 |
It looks like you have a disk problem.
-SYSTEM-F-FORCEDERROR, forced error flagged in last sector read
s/rob
| |||||
| 1597.7 | request for DECmcc full installation guide. | ZPOVC::SINSPS | Mon Apr 27 1992 22:54 | 6 | |
re .1 May I know if the file BSYBEE::DUA0:[PUBLIC]FULLINSTALL.PS still
present ? Could anyone give a pointer where I can get a similar copy of
the file. I need it urgently to perform an installation.
Thanks.
Eng Huat.
| |||||
| 1597.8 | BSYBEE -> PPINC | TOOK::MINTZ | Erik Mintz, DECmcc Development, dtn 226-5033 | Tue Apr 28 1992 11:04 | 5 |
Files from BSYBEE were moved to PPINC (there's a note here somewhere that gives the full pointer). Sorry I don't remember the directory. -- Erik | |||||
| 1597.9 | TOOK::FONSECA | I heard it through the Grapevine... | Tue Apr 28 1992 12:08 | 14 | |
<<< NOTED::DISK$NOTES4:[NOTES$LIBRARY_4OF5]MCC.NOTE;1 >>>
-< DECmcc Network Management Product Family >-
================================================================================
Note 2525.0 BSYBEE::DUA0:[PUBLIC] is now PPINC::MCC_PUBLIC:[MISC] No replies
BSYBEE::EGOLF "John C. Egolf LKG2-2/T02 x226-7874" 14 lines 10-MAR-1992 16:22
--------------------------------------------------------------------------------
Where ever you see any reference to:
BSYBEE::DUA0:[PUBLIC]
Now use:
PPINC::MCC_PUBLIC:[MISC]
| |||||