| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
With the alarm below, I'm trying to snapshot the utilization
of a circuit over 10 minutes once a hour but it fails with an evaluation
error as below.
Any clues?
Ian.
MCC 0 ALARMS RULE circ_syn0_in_util_a41rt1
AT 18-JUL-1991 19:45:05 All Attributes
NAME = circ_syn0_in_util_a41rt1
Error Condition = "Software logic error detected,
%MCC-S-SPECIALIZED_EXC, success with
management module-specific exception
reply
"
Result of Last Evaluation = Error
State = Enabled
Substate = Running
Time of Last Evaluation = 18-JUL-1991 19:17:33.07
Creation Timestamp = 18-JUL-1991 19:07:30.67
Evaluation Error = 1
Evaluation False = 0
Evaluation True = 0
Exception Handler = SYS$COMMON:[MCC]MCC_ALARMS_LOG_EXCEPTI
ON.COM;2
Expression = (NODE4 A41RT1 circuit SYN-0 inbound
util > 75, at every 1, for start
(-00:00) dura 00:10:00)
Perceived Severity = minor
Procedure = $220$DIA1:[MCC_LOCAL_ALARMS]LOCAL_MINO
R_ALARM.COM;1
Queue = "alarms$batch"
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1266.1 | just catching up... | TOOK::CALLANDER | Jill Callander DTN 226-5316 | Wed Jul 24 1991 17:26 | 4 |
I am just catching up with the notes, I have forwarded your problem report along to the appropriate teams. Thanks for your patience. moderator | |||||
| 1266.2 | SHOW inbound util. | TOOK::ANWARUDDIN | Anwar | Fri Jul 26 1991 09:35 | 11 |
re: .0 Could you please issue the following SHOW directive to get the utilization? If this works you could try enabling the Alarm again. I am trying to find out if this happens consistently and if it can be isolated. SHOW NODE4 A41RT1 CIRC SYN-0 INBOUND UTILIZATION,AT EVERY 0:2:0 UNTIL +0:10:0,- FOR START +0:00 DURA 0:1:0 Thanks for your patience. | |||||
| 1266.3 | Seems to be working now. | SUBURB::SMYTHI | Ian Smyth 830-3869 | Fri Jul 26 1991 12:49 | 61 |
SHOW NODE4 A41RT1 CIRC SYN-0 INBOUND UTILIZATION,AT EVERY 0:2:0 UNTIL +0:10:0,-
FOR START +0:00 DURA 0:1:0
-------------------------------------------------------------------------
Node4 a41rt1 Circuit syn-0
AT 26-JUL-1991 15:28:03 Statistics
Inbound Utilization = 2.15 Percent
Node4 a41rt1 Circuit syn-0
AT 26-JUL-1991 15:30:03 Statistics
Inbound Utilization = 2.24 Percent
Node4 a41rt1 Circuit syn-0
AT 26-JUL-1991 15:32:03 Statistics
Inbound Utilization = 4.89 Percent
Node4 a41rt1 Circuit syn-0
AT 26-JUL-1991 15:34:03 Statistics
Inbound Utilization = 3.53 Percent
Node4 a41rt1 Circuit syn-0
AT 26-JUL-1991 15:36:03 Statistics
Inbound Utilization = 2.83 Percent
------------------------------------------------------------
The alarm appears to be working OK now. I was having problems
when I had about 15 of these alarms running. I enabled about 6
of them this afternoon and they all appear to be still running.
--------------------------------------------------------------
MCC 0 ALARMS RULE TEST_Circ_Syn0_In_Util_A41RT1
AT 26-JUL-1991 17:21:26 All Attributes
NAME = TEST_Circ_Syn0_In_Util_A41RT1
Result of Last Evaluation = False
State = Enabled
Substate = Running
Time of Last Evaluation = 26-JUL-1991 16:30:11.23
Creation Timestamp = 26-JUL-1991 15:20:09.78
Evaluation Error = 0
Evaluation False = 2
Evaluation True = 0
Exception Handler = SYS$COMMON:[MCC]MCC_ALARMS_LOG_EXCEPTI
ON.COM;2
Expression = (NODE4 A41RT1 circuit SYN-0 inbound
util > 75, at every 1, for start
(-00:00) dura 00:10:00)
Perceived Severity = minor
Procedure = $220$DIA1:[MCC_LOCAL_ALARMS]LOCAL_MINO
R_ALARM.COM;1
Queue = "alarms$batch"
| |||||