| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 1242.1 | Sample run | BSYBEE::EGOLF | John C. Egolf LKG2-2/T02 x226-7874 | Fri Jul 12 1991 15:01 | 56 |
| Hawk2� @MCC_LOAD_SNMP
Reading UCX database for SNMP host names...
LOCAL database
Host address Host name
16.20.144.69 ALARMS
16.20.48.89 BOOMA3
16.20.0.4 GATE1
16.20.32.254 GATEWAY32
16.20.144.93 HAWK2
127.0.0.1 LOCALHOST, localhost
16.20.144.76 MCCU01.LKG.DEC.COM
16.20.144.77 MCCU02.LKG.DEC.COM, MCCU02
16.20.144.68 MIEKE
16.20.0.10 NAMED
16.20.32.48 PA
16.30.0.135 POUL
16.20.32.250 ROUTER
16.20.0.189 TCPJON
16.20.32.59 TCPMGR
16.30.0.84 VINTNR
Enter name of output command file : UCX_HOST.COM
Done.
Hawk2�
Hawk2� TYPE UCX_HOST.COM
Register SNMP ALARMS
Register SNMP GATE1
Register SNMP GATEWAY32
Register SNMP HAWK2
Register SNMP LOCALHOST
Register SNMP MCCU01.LKG.DEC.COM
Register SNMP MCCU02.LKG.DEC.COM
Register SNMP MIEKE
Register SNMP NAMED
Register SNMP PA
Register SNMP POUL
Register SNMP ROUTER
Register SNMP TCPJON
Register SNMP TCPMGR
Register SNMP VINTNR
Hawk2�
Hawk2� MANAGE/ENTERPRISE
DECmcc (V1.1.0)
MCC> @UCX_HOST.COM
.
.
.
MCC> exit
|
| 1242.2 | how about DECnet nodes? | HSOMAI::LIN | | Sun Jul 14 1991 15:50 | 2 |
| Do you have a command file to read NCP database to register DECnet
node? Thanks.
|
| 1242.3 | DECnet node utility on the kit. | CHRISB::BRIENEN | DECmcc Bridge|Station|SNMP Management. | Mon Jul 15 1991 09:24 | 8 |
| > Do you have a command file to read NCP database to register DECnet
> node? Thanks.
If you have the DECmcc V1.1/VMS kit, you have the NCP -> DECmcc utility.
"It's in there..."
Chris
|
| 1242.4 | Read the installation guide. | BSYBEE::EGOLF | John C. Egolf LKG2-2/T02 x226-7874 | Mon Jul 15 1991 15:16 | 1 |
| See Installation Guide page 6-10
|