| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 699.1 | SETing Line Speed | TOOK::ANWARUDDIN | Anwar | Fri Feb 08 1991 09:37 | 7 |
|
Line Speed is an orphaned attribute. In the case of Ethernet lines, it
is supplied by the AMs because it is known. In the case of non-Ethernet
lines, it has to be set. Before you SET the line speed you should
REGISTER the Node the line is on. If the REGISTER is successful, you can
set the line speed. I think this is described in the BMS Release Notes.
|
| 699.2 | Line Speed in DECnet phase IV | TOOK::CAREY | | Mon Feb 11 1991 17:35 | 46 |
|
From the DECnet phase 4 perspective, the problem with Line Speeds is
that almost no devices make the speed visible to the software.
For Ethernet devices, the speed is clearly defined, so we fill in the
line speed if we see that the protocol is Ethernet.
Some asynchronous DDCMP lines also return the line speed, and we will
allow that to be passed back directly to the user.
For other communications devices, the line speed is something set up in
the hardware that the software cannot infer from the characteristics of
the device.
Therefore, we allow the network manager (you in this case) to store
that information in the MIR.
Anwar is correct that you should register the NODE4 entity.
Registering a Node4 has the added effect of registering all the lines
and circuits currently available on that node4, so there is generally
no need to specifically register lines.
Then, using MCC, set the line speed to the speed you know the line to
be operating at. for example:
MCC> SET NODE4 mynode LINE DMR-0 line speed 56000
From that point on, this added line speed will be returned as a
Characteristic of line DMR-0 on mynode.
For your information, some additional behaviors of the line speed
characteristic for phase 4:
o If the line speed is naturally returned by the device, then we
return that line speed to the user, ignoring anything that may be
stored in the MIR.
o If the line is an Ethernet line, then we apply the default only if
there is no line speed stored in the MIR. If there is something in
the MIR, we return that.
o For other devices, we return the line speed if it is in the MIR,
and not at all if it isn't.
|
| 699.3 | The log file... | ROM01::NINNI | Don't worry...be happy | Wed Feb 13 1991 08:57 | 138 |
|
I'm sorry, but I still have the same problem. I followed
your instructions and I read the release notes.
This is the log file:
Giusy > mcc
DECmcc (T1.1.0)
Default Entity =
Default Qualifier =
Prompt = MCC>
Indentation = 42
Symbol Name Symbol Value
----------- ------------
STDSTAT : for start (-00:00) duration 00:01:00
No notify requests are currently in progress
Command procedure verification is OFF
Logging is OFF, Logging file is MCC.LOG
MCC> show node4 RT5BO line * line speed
Node4 46.375 Line FIRENZE
AT 13-FEB-1991 08:53:30 Characteristics
Node4 46.375 Line MILANO
AT 13-FEB-1991 08:53:30 Characteristics
Line Speed = 64000
Node4 46.375 Line PISA
AT 13-FEB-1991 08:53:32 Characteristics
Node4 46.375 Line X25-0
AT 13-FEB-1991 08:53:33 Characteristics
Node4 46.375 Line ETHERNET
AT 13-FEB-1991 08:53:34 Characteristics
Line Speed = 10000000
MCC> show node4 RT5BO line MILANO all statis, stdstat
Node4 RT5BO Line MILANO
AT 13-FEB-1991 08:54:59 Statistics
Line speed not set. Please set speed and reissue directive.
MCC> deregister node4 RT5BO
Node4 46.375
AT 13-FEB-1991 09:03:44
Deregistration Successful
MCC> register node4 .DNA_NODE.RT5BO
%STR-F-ILLSTRCLA, illegal string class
%STR-E-ILLSTRCLA, illegal string class
PROBLEM 1>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>In this case I
need to exit and rerun MCC. Why?
Infn_mg > mcc
DECmcc (T1.1.0)
Default Entity =
Default Qualifier =
Prompt = MCC>
Indentation = 42
Symbol Name Symbol Value
----------- ------------
STDSTAT : for start (-00:00) duration 00:01:00
No notify requests are currently in progress
Command procedure verification is OFF
Logging is OFF, Logging file is MCC.LOG
MCC> register node4 .DNA_NODE.RT5BO
SYNONYM = RT5BO
Node4 46.375 Line ETHERNET
AT 13-FEB-1991 09:04:31
Registration Successful
MCC>
MCC> show node4 RT5BO line * line speed
Node4 46.375 Line FIRENZE
AT 13-FEB-1991 09:07:15 Characteristics
Node4 46.375 Line MILANO
AT 13-FEB-1991 09:07:15 Characteristics
Node4 46.375 Line PISA
AT 13-FEB-1991 09:07:16 Characteristics
Node4 46.375 Line X25-0
AT 13-FEB-1991 09:07:17 Characteristics
Node4 46.375 Line ETHERNET
AT 13-FEB-1991 09:07:18 Characteristics
Line Speed = 10000000
MCC> create node4 RT5BO line MILANO
Node4 46.375 Line MILANO
AT 13-FEB-1991 09:07:37
Attempt to create duplicate entity rejected.
MCC> set node4 RT5BO line MILANO line speed 64000
Node4 46.375 Line MILANO
AT 13-FEB-1991 09:08:03 Characteristics
Modifications completed successfully
Line Speed = 64000
MCC> show node4 RT5BO line MILANO line speed
Node4 46.375 Line MILANO
AT 13-FEB-1991 09:08:18 Characteristics
Line Speed = 64000
MCC> show node4 RT5BO line MILANO all statis, stdstat
Node4 RT5BO Line MILANO
AT 13-FEB-1991 09:09:45 Statistics
Line speed not set. Please set speed and reissue directive.
MCC> exit
Infn_mg > logout
Any suggestions?
Giuseppina
|
| 699.4 | This may be worth looking into... | TOOK::GUERTIN | E = mcc | Wed Feb 13 1991 09:51 | 11 |
| I've seen similar behavior when a user had installed a PRE-V1.0 MCC (MCC
T1.0 EFT) and never cleaned out their namespace. A major restructuring
took place in the way MCC V1.0 stored information in the DNS
namespace. If you have had any pre-V1.0 MCC installations, the namespace
you used had to be cleaned out. Unfortunately, we did not (do not)
provide tools to converting MCC pre-v1.0 namespace setups to MCC V1.0 and
later namespace setups.
Is this a possibility?
-Matt.
|
| 699.5 | Probably yes... | ROM01::NINNI | Don't worry...be happy | Wed Feb 13 1991 10:03 | 7 |
|
Probably yes; I will check. But if it is my situation, Do I need
to reload only the DECmcc directories, or do I recreate the namespece?
Thanks in advance
Giuseppina
|
| 699.6 | IFT v.1.1 | ROM01::NINNI | Don't worry...be happy | Wed Feb 13 1991 11:44 | 21 |
|
I've checked.
My situation is the following one:
- I did the upgrade from the PRE-EFT v.1.0 to the IFT v.1.1; in that
situation I deleted all the defined soft links, objects in the
Namespace and I reloaded it using the MCC_LOAD_NODE.com.
I discovered the problem about Performance Analyzer and Line speed
and I read a topics in this notefile about it with the answer of its
solution in the EFT of v.1.1
- I waited for the EFT v.1.
- Finally, I've installed it in order to produce traffic reports. But
the problem , described in the previous topic, is occured.
I hope to be clear. Any suggestions
Giuseppina
|
| 699.7 | May you help me? | ROM01::NINNI | Don't worry...be happy | Tue Feb 19 1991 03:54 | 6 |
|
Is there any solution for my problem? I need to have an answer.
Thanks in advance
Giuseppina
|
| 699.8 | try with fulllname | GOSTE::CALLANDER | | Wed Feb 20 1991 13:43 | 13 |
|
I don't have an answer, though I am sure there is one. Have you
tried the MCS kit?
Besides that could you try the directive, referencing the node4
entity by its fullnames (node4 .dna_node.xxx) and see what happens.
If this doesn't give any better luck I suggest that you give a call
to Anwar, he is the project lead for the performance anaylzer (DTN
226-5393)
jill
|
| 699.9 | Not MCS. | ROM01::NINNI | Don't worry...be happy | Tue Feb 26 1991 06:20 | 112 |
|
I'm not working on the MCS release, but the previous one.
I 've tried to do the same commands, using your suggestions, but like
you can see withou any successes.
In these tests, it seems that the nodes' names which are stored in the
DNS sometimes in Uppercase, other timer in lowercase, other ones it's a
mixture of both formats. Is it normal?
For example .DNA_NODE.NODENAME
.dna_node.nodename
.DNA_NODE.nodename
What do you suggest? May I solve my problems installing the MCS
kit? Thanks in advance
Giuseppina
dir node4 *, in domain Roma
!
!Node4 INFNMG_NS:.DNA_NODE.INFNMG
!AT 25-FEB-1991 15:23:02
!
!Directory successful.
! Registered Name = INFNMG_NS:.DNA_NODE.INFNMG
! Address = 46.19
! Name = INFNMG
!
!Node4 INFNMG_NS:.dna_node.INFNGW
!AT 25-FEB-1991 15:23:03
!
!Directory successful.
! Registered Name = INFNMG_NS:.dna_node.INFNGW
! Address = 46.13
! Name = INFNGW
!
!Node4 INFNMG_NS:.dna_node.rt3bo
!AT 25-FEB-1991 15:23:03
!
!Directory successful.
! Registered Name = INFNMG_NS:.dna_node.rt3bo
! Address = 46.107
! Name = RT3BO
!
!Node4 INFNMG_NS:.dna_node.rt5bo
!AT 25-FEB-1991 15:23:04
!
!Directory successful.
! Registered Name = INFNMG_NS:.dna_node.rt5bo
! Address = 46.375
! Name = RT5BO
!
show node4 RT5BO line MILANO line speed
!
!Node4 46.375 Line MILANO
!AT 25-FEB-1991 15:23:25 Characteristics
!
! Line Speed = 64000
!
show node4 RT5BO line MILANO all statis,for duration 00:00:30
!
!Node4 RT5BO Line MILANO
!AT 25-FEB-1991 15:24:41 Statistics
!
!Line speed not set. Please set speed and reissue directive.
!
show node4 rt5bo line MILANO all statis,for duration 00:00:30
!
!Node4 rt5bo Line MILANO
!AT 25-FEB-1991 15:25:27 Statistics
!
!Line speed not set. Please set speed and reissue directive.
!
show node4 .dna_node.rt5bo line MILANO all statis,for duration 00:00:30
!
!Node4 INFNMG_NS:.dna_node.rt5bo Line MILANO
!AT 25-FEB-1991 15:26:13 Statistics
!
!Line speed not set. Please set speed and reissue directive.
!
show node4 .dna_node.rt5bo line milano all statis,for duration 00:00:30
!
!Node4 INFNMG_NS:.dna_node.rt5bo Line milano
!AT 25-FEB-1991 15:26:57 Statistics
!
!Line speed not set. Please set speed and reissue directive.
!
show node4 .DNA_NODE.RT5BO line MILANO all statis,for duration 00:00:30
!
!Node4 INFNMG_NS:.DNA_NODE.RT5BO Line MILANO
!AT 25-FEB-1991 15:28:00 Statistics
!
!Line speed not set. Please set speed and reissue directive.
!
show node4 .DNA_NODE.RT5BO line MILANO all statis,for duration 00:00:30
!
!Node4 INFNMG_NS:.DNA_NODE.RT5BO Line MILANO
!AT 25-FEB-1991 15:29:13 Statistics
!
!Line speed not set. Please set speed and reissue directive.
!
show node4 .DNA_NODE.RT5BO line MILANO line speed
!
!Node4 46.375 Line MILANO
!AT 25-FEB-1991 15:30:22 Characteristics
!
! Line Speed = 64000
!
|
| 699.10 | Let's verify the namespace and line speed are okay.... | TOOK::CAREY | | Wed Feb 27 1991 09:53 | 62 |
|
Giuseppinna,
The error message you're receiving indicates (obviously) that the line
speed isn't set up correctly, yet it appears to be just fine. It may
be that some other condition which exists on your installation is
prompting PA to incorrectly report this error, while it should be
indicating some other error condition.
From the DECnet Phase IV AM perspective, I'd like to make sure that the
line speed is set for line MILANO and is gettable in whatever way the
PA may choose to attempt to get it. You have successfully shown it one
way, let's verify all other ways. If the line speed is set and
gettable from all directions, that will give us some information to
work with resolving this.
From MCC, try the following:
DIRECTORY NODE4 INFNMG_NS:.dna_node.rt5bo
DIRECTORY NODE4 .dna_node.rt5bo
DIRECTORY NODE4 .DNA_NODE.rt5bo
DIRECTORY NODE4 .dna_node.RT5BO
DIRECTORY NODE4 RT5BO
DIRECTORY NODE4 rt5bo
DIRECTORY NODE4 46.375
My testing shows that you should get the same response to all of these,
that is, the request should return the Registered Name, Address, and
Name of the node4 registered as RT5BO.
If one of these returns anything different (such as an error), then we
may be onto the problem.
Assuming the line speed on line MILANO is still set, try the following
commands from the MCC> prompt as well:
SHOW NODE4 INFNMG_NS:.dna_node.rt5bo line milano line speed
SHOW NODE4 .dna_node.rt5bo line milano line speed
SHOW NODE4 rt5bo line milano line speed
SHOW NODE4 46.375 line milano line speed
All of these should return the line speed of 64000. If any one of them
fails, then it points to an error in the namespace, and we should be
able to track it down quickly.
I have a nameserver installed on my local VMS node for my testing, and
I haven't been able to induce any errors by using different
combinations of upper and lower case characters, so I don't think it is
a problem, but these commands and attempts should help us to make sure.
If all of these commands work (and they all work on my test platform),
then we know that the line speed is set correctly, the node4 is
registered well, and therefore the error must be an incorrect report of
some other condition. If you get any errors, or any strange results
from these requests, then they should point us quickly to whatever
error has occurred to set up this condition.
Thanks for your time, let's see what the results are of this suite....
-Jim Carey
|
| 699.11 | These are the results | ROM01::NINNI | Don't worry...be happy | Thu Feb 28 1991 06:25 | 401 |
| HI JIM,
I've followed your suggestions. These are the results:
> From MCC, try the following:
>
> DIRECTORY NODE4 INFNMG_NS:.dna_node.rt5bo
> DIRECTORY NODE4 .dna_node.rt5bo
> DIRECTORY NODE4 .DNA_NODE.rt5bo
> DIRECTORY NODE4 .dna_node.RT5BO
> DIRECTORY NODE4 RT5BO
> DIRECTORY NODE4 rt5bo
> DIRECTORY NODE4 46.375
>
DIRECTORY NODE4 .DNA_NODE.RT5BO, IN DOMAIN CNAF
!
!Node4 INFNMG_NS:.DNA_NODE.RT5BO
!AT 28-FEB-1991 08:39:42
!
!Directory successful.
! Registered Name = INFNMG_NS:.DNA_NODE.RT5BO
! Address = 46.375
! Name = RT5BO
!
DIRECTORY NODE4 .DNA_NODE.rt5bo, IN DOMAIN CNAF
!
!Node4 INFNMG_NS:.DNA_NODE.RT5BO
!AT 28-FEB-1991 08:40:02
!
!Directory successful.
! Registered Name = INFNMG_NS:.DNA_NODE.RT5BO
! Address = 46.375
! Name = RT5BO
!
DIRECTORY NODE4 .dna_node.rt5bo, IN DOMAIN CNAF
!
!Node4 INFNMG_NS:.DNA_NODE.RT5BO
!AT 28-FEB-1991 08:40:19
!
!Directory successful.
! Registered Name = INFNMG_NS:.DNA_NODE.RT5BO
! Address = 46.375
! Name = RT5BO
!
DIRECTORY NODE4 .dna_node.RT5BO, IN DOMAIN CNAF
directory node4 rt3bo
!
!Node4 rt3bo
!AT 28-FEB-1991 09:13:42
!
!Directory successful.
! Registered Name = INFNMG_NS:.dna_node.rt3bo
! Address = 39.107
! Name = RT3BO
!
directory node4 rt3bo, in domain cnaf
!
!Node4 rt3bo
!AT 28-FEB-1991 09:13:51
!
!The requested operation cannot be completed
! MCC Unhandled Service Reply = No such entity: Domain Member
! Unknown Entity = Domain Member
!
show node4 rt3bo line milano line speed
!
!Node4 39.107 Line milano
!AT 28-FEB-1991 09:14:27 Characteristics
!
!No such entity: Node4 rt3bo Line milano
! Unknown Entity = Node4 rt3bo Line milano
!
show node4 rt3bo line ferrara line speed
!
!Node4 39.107 Line ferrara
!AT 28-FEB-1991 09:14:41 Characteristics
!
! Line Speed = 9600
!
show node4 rt3bo line ferrara all statis, for duration 00:00:30
!
!Node4 rt3bo Line ferrara
!AT 28-FEB-1991 09:15:30 Statistics
!
!Examination of Attributes shows:
! Duration = 30 Seconds
! Outbound Utilization = 6.900000E-02 Percent
! Inbound Utilization = 1.400000E-02 Percent
! Average Outbound Block Size = 15 Bytes/Block
! Average Inbound Block Size = -- Invalid Value
! Outbound Block Rate = 3.300000E-02 Blocks/Sec
! Inbound Block Rate = 0 Blocks/Sec
! Count of Local Reply Timeouts = 0
! Count of Remote Reply Timeouts = 0
! Outbound Data Frame Errors = 0
! Inbound Data Frame Errors = 0
! Count of Local Buffer Errors = 0
! Count of Remote Buffer Errors = 0
! Count of Selection Timeouts = 0
! Count of Selection Intervals Elapsed = 0
! Count of Remote Station Errors = 0
! Count of Local Station Errors = 0
! Error Percent = 0
! Outbound Bytes = 15 Bytes
! Inbound Bytes = 5 Bytes
! Outbound Data Blocks = 1 Blocks
! Inbound Data Blocks = 0 Blocks
!
!
!
!
!Node4 INFNMG_NS:.DNA_NODE.RT5BO
!AT 28-FEB-1991 08:40:31
!
!Directory successful.
! Registered Name = INFNMG_NS:.DNA_NODE.RT5BO
! Address = 46.375
! Name = RT5BO
!
>>>>
>>>> Like you can see, if you use DIRECTORY command + IN DOMAIN
>>>> qualifier, it works only if you specify the full name (not address,
>>>> not Synonym)
DIRECTORY NODE4 RT5BO, IN DOMAIN CNAF
!
!Node4 RT5BO
!AT 28-FEB-1991 08:40:45
!
!The requested operation cannot be completed
! MCC Unhandled Service Reply = No such entity: Domain Member
! Unknown Entity = Domain Member
!
DIRECTORY NODE4 rt5bo, IN DOMAIN CNAF
!
!Node4 rt5bo
!AT 28-FEB-1991 08:41:02
!
!The requested operation cannot be completed
! MCC Unhandled Service Reply = No such entity: Domain Member
! Unknown Entity = Domain Member
!
directory node4 rt5bo
!
!Node4 rt5bo
!AT 28-FEB-1991 09:12:55
!
!Directory successful.
! Registered Name = INFNMG_NS:.DNA_NODE.RT5BO
! Address = 46.375
! Name = RT5BO
!
directory node4 rt5bo, in domain cnaf
!
!Node4 rt5bo
!AT 28-FEB-1991 09:13:08
!
!The requested operation cannot be completed
! MCC Unhandled Service Reply = No such entity: Domain Member
! Unknown Entity = Domain Member
!
directory node4 46.375
!
!Node4 46.375
!AT 28-FEB-1991 09:13:20
!
!Directory successful.
! Registered Name = INFNMG_NS:.DNA_NODE.RT5BO
! Address = 46.375
! Name = RT5BO
!
directory node4 46.375, in domain cnaf
!
!Node4 46.375
!AT 28-FEB-1991 09:13:32
!
!The requested operation cannot be completed
! MCC Unhandled Service Reply = No such entity: Domain Member
! Unknown Entity = Domain Member
!
> ... Try these commands from the MCC> prompt as well:
>
> SHOW NODE4 INFNMG_NS:.dna_node.rt5bo line milano line speed
> SHOW NODE4 .dna_node.rt5bo line milano line speed
> SHOW NODE4 rt5bo line milano line speed
> SHOW NODE4 46.375 line milano line speed
>
show node4 rt5bo line milano line speed
!
!Node4 46.375 Line milano
!AT 28-FEB-1991 09:14:16 Characteristics
!
! Line Speed = 64000
!
show node4 rt5bo line milano all statis, for duration 00:00:30
!
!Node4 rt5bo Line milano
!AT 28-FEB-1991 09:16:34 Statistics
!
!Line speed not set. Please set speed and reissue directive.
!
show node4 INFNMG_NS:.DNA_NODE.RT5BO line MILANO line speed
!
!Node4 46.375 Line MILANO
!AT 28-FEB-1991 09:17:03 Characteristics
!
! Line Speed = 64000
!
show node4 INFNMG_NS:.DNA_NODE.rt5bo line MILANO line speed
!
!Node4 46.375 Line MILANO
!AT 28-FEB-1991 09:17:17 Characteristics
!
! Line Speed = 64000
!
show node4 INFNMG_NS:.dna_node.rt5bo line MILANO line speed
!
!Node4 46.375 Line MILANO
!AT 28-FEB-1991 09:17:36 Characteristics
!
! Line Speed = 64000
!
show node4 INFnmg_NS:.dna_NODE.rt5BO line MILANO line speed
!
!Node4 46.375 Line MILANO
!AT 28-FEB-1991 09:17:57 Characteristics
!
! Line Speed = 64000
!
show node4 INFNMG_ns:.dNa_NODE.rt5BO line MILANO line speed
!
!Node4 46.375 Line MILANO
!AT 28-FEB-1991 09:18:18 Characteristics
!
! Line Speed = 64000
!
show node4 .dna_node.rt5bo line MILANO line speed
!
!Node4 46.375 Line MILANO
!AT 28-FEB-1991 09:18:47 Characteristics
!
! Line Speed = 64000
!
show node4 .dna_node.rt5bo line MILANO line speed
!
!Node4 46.375 Line MILANO
!AT 28-FEB-1991 09:18:59 Characteristics
!
! Line Speed = 64000
!
show node4 .DNA_NODE.rt5bo line MILANO line speed
!
!Node4 46.375 Line MILANO
!AT 28-FEB-1991 09:19:18 Characteristics
!
! Line Speed = 64000
!
show node4 .DNA_NODE.RT5BO line MILANO line speed
!
!Node4 46.375 Line MILANO
!AT 28-FEB-1991 09:19:32 Characteristics
!
! Line Speed = 64000
!
show node4 RT5BO line MILANO line speed
!
!Node4 46.375 Line MILANO
!AT 28-FEB-1991 09:19:47 Characteristics
!
! Line Speed = 64000
!
show node4 rt5bo line MILANO line speed
!
!Node4 46.375 Line MILANO
!AT 28-FEB-1991 09:19:59 Characteristics
!
! Line Speed = 64000
!
show node4 46.375 line MILANO line speed
!
!Node4 46.375 Line MILANO
!AT 28-FEB-1991 09:20:15 Characteristics
!
! Line Speed = 64000
!
show node4 46.375 line MILANO line speed, in domain canf
!
!Node4 46.375 Line MILANO
!AT 28-FEB-1991 09:20:28 Characteristics
!
! Line Speed = 64000
!
>I HAVE OBSERVED ALSO IT'S THE SAME IF I USE THE IN DOMAIN QUALIFIER WITH SHOW
>COMMAND OR I DON'T USE IT.
show node4 46.375 line MILANO line speed, in domain cnaf
!
!Node4 46.375 Line MILANO
!AT 28-FEB-1991 09:20:39 Characteristics
!
! Line Speed = 64000
!
show node4 46.375 line MILANO line speed, in domain pinco_pallino
!
!Node4 46.375 Line MILANO
!AT 28-FEB-1991 09:20:48 Characteristics
!
! Line Speed = 64000
!
show node4 46.375 line MILANO line speed, in domain eheheh
!
!Node4 46.375 Line MILANO
!AT 28-FEB-1991 09:21:01 Characteristics
!
! Line Speed = 64000
>>>> THERE IS ONLY ONE NODE WHERE I CAN APPLY THE PERFORMANCE ANALYZER.
>>>> THESE ARE THE RESULTS
directory node4 rt3bo
!
!Node4 rt3bo
!AT 28-FEB-1991 09:13:42
!
!Directory successful.
! Registered Name = INFNMG_NS:.dna_node.rt3bo
! Address = 46.107
! Name = RT3BO
!
directory node4 rt3bo, in domain cnaf
!
!Node4 rt3bo
!AT 28-FEB-1991 09:13:51
!
!The requested operation cannot be completed
! MCC Unhandled Service Reply = No such entity: Domain Member
! Unknown Entity = Domain Member
!
show node4 rt3bo line milano line speed
!
!Node4 46.107 Line milano
!AT 28-FEB-1991 09:14:27 Characteristics
!
!No such entity: Node4 rt3bo Line milano
! Unknown Entity = Node4 rt3bo Line milano
!
show node4 rt3bo line ferrara line speed
!
!Node4 46.107 Line ferrara
!AT 28-FEB-1991 09:14:41 Characteristics
!
! Line Speed = 9600
!
show node4 rt3bo line ferrara all statis, for duration 00:00:30
!
!Node4 rt3bo Line ferrara
!AT 28-FEB-1991 09:15:30 Statistics
!
!Examination of Attributes shows:
! Duration = 30 Seconds
! Outbound Utilization = 6.900000E-02 Percent
! Inbound Utilization = 1.400000E-02 Percent
! Average Outbound Block Size = 15 Bytes/Block
! Average Inbound Block Size = -- Invalid Value
! Outbound Block Rate = 3.300000E-02 Blocks/Sec
! Inbound Block Rate = 0 Blocks/Sec
! Count of Local Reply Timeouts = 0
! Count of Remote Reply Timeouts = 0
! Outbound Data Frame Errors = 0
! Inbound Data Frame Errors = 0
! Count of Local Buffer Errors = 0
! Count of Remote Buffer Errors = 0
! Count of Selection Timeouts = 0
! Count of Selection Intervals Elapsed = 0
! Count of Remote Station Errors = 0
! Count of Local Station Errors = 0
! Error Percent = 0
! Outbound Bytes = 15 Bytes
! Inbound Bytes = 5 Bytes
! Outbound Data Blocks = 1 Blocks
! Inbound Data Blocks = 0 Blocks
!
!
!
THANKS FOR YOUR TIME
GIUSEPPINA
|
| 699.12 | Watch this space. | TOOK::CAREY | | Fri Mar 01 1991 11:46 | 7 |
|
Thanks for the quick response. I've extracted it, we'll take a look
at it and probably will have some more questions for you soon....
Maybe even some answers!
-Jim
|
| 699.13 | No answers, what kind of node and line? | TOOK::CAREY | | Fri Mar 01 1991 16:03 | 19 |
|
Okay,
The line speed seems to be in the namespace just fine, and seems to be
available no matter how you reference the Node4.
What kind of a node is it?
What kind of a line?
I can't reproduce this error, and have played with a wide variety of
DECnet nodes and lines. I am running the latest version of MCC, so
my copy may be a little better than yours.
-Jim Carey
P.S. Thanks for collecting all that information for me.
|
| 699.14 | DEMSA | ROM01::NINNI | Don't worry...be happy | Mon Mar 04 1991 03:55 | 6 |
|
The routers are DEMSAs.
Giuseppina
|
| 699.15 | Latest kit has no problem with DEMSAs | TOOK::CAREY | | Mon Mar 04 1991 10:11 | 29 |
|
Thanks for the info.
Most of the testing I just completed trying to reproduce and verify
your problem was on DEMSA routers. I used lines on all three
configurations, X25, SNA gateway, and DECrouter 2000s in hopes that it
might be a specific problem with a specific type of DECnet line. On
none of them was I able to cause this to happen.
I am running with the very latest and greatest V1.1 kit. The
Performance Analysis FM, and the DECnet AM both saw some changes during
EFT in response to reported problems, and it may be that we indirectly
addressed this problem you have been having.
I'm stuck. I'd like to see if you are able to reproduce this problem
with the latest kit. Hopefully, we will find that we are chasing a
problem that was cleared up by the enhancements to DECmcc that were
required during Field Test.
Without being able to reproduce this problem, we are stuck.
When you get an opportunity, upgrade to the latest announced kit (see
note 3 in here).
Let me know if you have problems with it. Perhaps that will give us
more information about what is going on.
-Jim
|
| 699.16 | OK, I will do.. | ROM01::NINNI | Don't worry...be happy | Tue Mar 05 1991 06:17 | 8 |
| I will try the upgrade with the latest announced kit.
I will share with you any results.
Thanks
Giuseppina
|
| 699.17 | More on line speeds | LEMAN::BIRO | Georges Biro - SR/ACT | Tue Jun 25 1991 10:07 | 49 |
| Hello,
What is the last status of this problem?
I am running DECmcc BMS V1.1 + SNMP AM (corrected as per the release
notes) + TSAM + VItalink AM. I would like to use the PA FM. I
attempted to define the line speed from the FCL as documented (set node4
ZSWRTR line SYN-0 line speed 64000) I get the error message:
MCC Error = %MCC-E-ILVTNF, specified tag not
found within current constructor
I can set the line speed from the iconic interface, however. I can also
see it as follows:
MCC> SHOW NODE4 ZSWRTR LINE SYN-0 ALL CHARACTERISTICS
Node4 48.690 Line SYN-0
AT 25-JUN-1991 15:00:54 Characteristics
Examination of Attributes shows:
Counter Timer = 14400 Seconds
Device = SYN-0
Receive Buffers = 64
Controller = Normal
Duplex = Full
Protocol = DDCMP Point
Clock = External
Service Timer = 20000 Milliseconds
Retransmit Timer = 3000 Milliseconds
Line Speed = 64000
Still, the statistical commands fail with the following result:
MCC> SHOW NODE4 ZSWRTR LINE SYN-0 ALL statistics, FOR EVERY 00:30 UNTIL -
13:15 START (12:45), IN DOMAIN GENEVE
Node4 ZSWRTR Line SYN-0
AT 25-JUN-1991 13:15:00 Statistics
Line speed not set. Please set speed and reissue directive.
This problem seems to be similar to the one identified by Giuseppina.
Is there a solution?
Thanks,
Georges.
|
| 699.18 | GAB AM ? | HERON::MORALES | DEC:.VBO.ACT.DECmcc|828-5383 | Wed Jun 26 1991 14:32 | 26 |
|
Ave Georges,
if I remember correctly I had the same problem to set line speed (%MCC-E-ILVTNF),
this was caused by the Gab AM ...I had to apply a remedy similar to
SNMP patch because the set directive uses a wrong code.
If you haven't the GAB AM then forget this reply,(others can also produce this
problem, check the class codes in the dictionary,mainly the highest value class),
otherwise try this:
DAP> show class gab directive set request set
Class (1) : GAB
Directive (6) : SET
-----> Request (7) : SET
Argument (4) : ARGSETVALUELIST 1 <---- do you get 121 ?
If yes , then you have to modify your MSL or the dictionary to have 1 for
argument code (for GAB and its subclasses).
Maybe its time to do an ILV dump .
Read also note 755.*
Manuel.
|
| 699.19 | Bon point | LEMAN::BIRO | Georges Biro - SR/ACT | Thu Jun 27 1991 05:01 | 10 |
| OK Manuel, here we are. I have the GAB AM and, of course, I read 121
instead of 1
Argument (4) : ARGSETVALUELIST 121
This explains the (%MCC-E-ILVTNF) problem. Does it also explain why,
after having defined the line speed from the iconic map, DECmcc still
complains about the line speed as not being set?
Merci,
Georges.
|