| Greetings!
I've sent this person several *very* long messages re: threads (including a
message about all the process/thread related parameters straight out of the
"System Administration" manual. See call #3515 for the last call Hu logged
about threads/processes on Digital UNIX - apparently he didn't heed my advice
to read Chapter 4 in the "System Administration" manual or the "Guide to DEC-
threads" manual which answers all the questions he kept asking me ten different
ways by email over the last few weeks. I'll tack on a reply to my original
call (3515) with all the email traffic Hu & I exchanged re: threads for your
reference, cheers...
Tony Swierkowski
Digital Equipment Corporation
Software Partner Engineering
Palo Alto, California
(415) 617-3601
"[email protected]"
|
| From: HYDRA::AXPDEVELOPER "Alpha Developer support" 13-MAY-1997 14:13:37.34
To: [email protected]
CC: mikelis,AXPDEVELOPER
Subj: Log 3616: Threads
Hu,
There are configuration attributess that you can change in the
sysconfigtab file that can be queried and manipulated with the
sysconfig and sysconfigdb commands. Please get the book entitled System
Tuning and Performance Management which should have come with your UNIX
distribution kits. If not, you can access it at our web site at:
http://www.partner.digital.com/www-swdev/pages/Home/TECH/techsupport.html
see the parameters: max-proc-per-user, max-threads-per-user, Usually
adding more memory will allow you to boost the maximum values of
several paramters.
Regards, James Mikelis
<<< HYDRA::DISK_NOTES$LIBRARY:[000000]AXP-DEVELOPER.NOTE;1 >>>
-< Alpha Developer Support >-
================================================================================
Note 3616.0 Scandinavian Softline Technology Oy 1 reply
HYDRA::AXPDEVELOPER "Alpha Developer support" 43 lines 13-MAY-1997 10:55
--------------------------------------------------------------------------------
Company Name : Scandinavian Softline Technology Oy
Contact Name : Hu Rui
Phone : +358-9-5495 6202
Fax : +358-9-512 4629
Email : [email protected]
Date/Time in : 13-MAY-1997 10:53:50
Entered by : Jim Mikelis
SPE center : MRO
Category : unix
OS Version : 4.0 B
System H/W : Alpha Station 255
Brief Description of Problem:
-----------------------------
From: SMTP%"[email protected]" 13-MAY-1997 08:09:51.33
To: "[email protected]" <[email protected]>
Subj: Process and Thread limit
Where the Process and Userlevel Threads limit is defined. I need to know
how many process and threads I can have at the most.
How I can change these parameters?
Now I have 64 MB RAM, if I get another 64 can I have more process and threads.
Is there any formular to calculate the kernel configuration?
Alpha Station 255, Unix 4.0 B.
Regards.
_________________________________________________
Hu Rui (Oracle Support No. 14428)
R&D, SMS Unit (Digital ASAP Support No. A60205)
Scandinavian Softline Technology Oy
Tulkinkuja 3 02600 ESPOO Finland
Tel +358-9-5495 6202 Fax +358-9-512 4629
Home Tel +358-9-2789426
Internet [email protected] http://www.softline.fi/
_________________________________________________
|