| Title: | Alpha Developer Support |
| Notice: | [email protected], 800-332-4786 |
| Moderator: | HYDRA::SYSTEM |
| Created: | Mon Jun 06 1994 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 3722 |
| Total number of notes: | 11359 |
Company Name : Cincom
Contact Name : Sandy Goertemiller
Phone : 1-513-677-7633
Fax :
Email : [email protected]
Date/Time in : 6-FEB-1997 11:02:12
Entered by : Donna Van Orden
SPE center : MRO
Category : UNIX
OS Version : 4.1
System H/W :
Brief Description of Problem:
-----------------------------
Application compiled fine using 3.2 41 alpha. They have since upgraded to
V4.1, and now are encountering errors indicating there are problems with
stdlib.h and type.h
Language is C, and they are also using Oracle 7.1.6. The precompiler version
is 2.0.6.0.0
I will check on the errors, while Sandy calls Oracle to see if it has been
checked out for Digital UNIX v4.1.
Donna
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3154.1 | HYDRA::VANORDEN | Thu Feb 06 1997 11:38 | 7 | ||
I see no mention of the errors, and so I suspect the problem is with
Oracle v7.1.6 and Digital UNIX v4.1 (not checked out?)
I'll also check and see if for some reason these header files changed
recently.
Donna
| |||||
| 3154.2 | HYDRA::VANORDEN | Thu Feb 06 1997 12:18 | 26 | ||
From: HYDRA::LNARAYAN "R Lakshminarayan, Software Partner Engg" 6-FEB-1997 12:02:06.28 To: VANORDEN CC: Subj: they may have to use these options in the makefile... From: HYDRA::LNARAYAN "R Lakshminarayan, Software Partner Engg" 14-JAN-1997 13:11:37.81 To: US3RMC::"[email protected]" CC: LNARAYAN Subj: RE: Oracle Proc*C question... Wiekus Beukes, I got the information that Oracle has changed some options ( I dont have the details) relating to Pro*C. But I understand that to avoid the error that you are encountering, please add these two options to the proc.mk ( or to the make file that you are using ) and then invoke make. the options are define=__DECC code=ANSI Hope this helps Regards Nari | |||||
| 3154.3 | HYDRA::VANORDEN | Thu Feb 06 1997 12:20 | 4 | ||
Called and left Sandy the information. I also asked her to call us
back with a status.
Donna
| |||||
| 3154.4 | HYDRA::VANORDEN | Thu Feb 06 1997 13:02 | 32 | ||
Sandy called back and left a message that she couldn't hear my voice
message so I sent the following mail:
From: HYDRA::AXPDEVELOPER "[email protected]" 6-FEB-1997 13:01:05.25
To: US3RMC::"[email protected]"
CC: AXPDEVELOPER
Subj: Seq No: 1997-3154 (add the following to your make file)
Sandy,
Through my research I found out that Oracle has changed some options
relating to Pro*C. I do not have the details of the changes made, nor
the problems encountered...but the recommendation is to add the following
to either proc.mk or the make file you are using:
define=__DECC code=ANSI
Last we spoke you were going to contact Oracle. Continue to pursue this
with them so that you might gather more details about the problem.
If you continue to need help please do not hesitate to contact us and
refer to Seq No. 1997-3154.
Good Luck,
Donna
Alpha Developer Support
| |||||