[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | VAX and Alpha VMS |
| Notice: | This is a new VMSnotes, please read note 2.1 |
| Moderator: | VAXAXP::BERNARDO |
|
| Created: | Wed Jan 22 1997 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 703 |
| Total number of notes: | 3722 |
487.0. "DEC 2000/300 DE425 warm boot fails NCP-W-OPEFAI" by NNTPD::"[email protected]" (Daniel Jeyachandran) Thu Apr 17 1997 12:01
==================================
Cross posted in Jensen notes entry 608.
==================================
DEC 2000/300 with DE425 works OK with cold restarts with VMS V6.1.
Fails with error during Decnet startup on warm reboots.
ERA0_MODE is set to twisted.
Show dev era0/full shows it as DE422, but Jensen console f/w recognises
it as a DE425.
Is this the problem related to bus_mode_algorithm new?
Following is the error message.
===========================
==> Define system wide logical names
%DEl-I-SUPERSEDE, previous value of DISK$SYSTEM has been superseded
==> Install Images
==> Start DECnet
%RUN-S-PROC_ID, Identification of created process is 0000008c
%%%%%%%%%%% OPCOM 16-Apr-1997 !4:03:45.93 %%%%%%%%%%
Mesage from user DECNETon SRL1
DECnet starting
%NCP-W-OPEFAI, Operatiion failure
%SYSTEM-F-TIMEOUT, device timeout
, timeout
, fatal hardware error
%NCP-W-UNRCMP, Unrecognized component , Circuit
Circuit = ERA-0
%NCP-I-NOINFO, no information in database
%RUN-S-PROC_ID, identification of created process is 0000008E
==> Start TCP/IP
%%%%%%%%%%% opcom 16-aPR-1997 14:03:57.24 %%%%%%%%%%
Message from user multinet on SRL1
Multinrt V4,0 Rev A (4.3 bsd-taboet Networking) : loaded at 8a89c000
Copyright (c) 1986-1988 SRI International
Copyright (c) 1988-1996 TGV, Inc.
Copyright (c) Cisco systems, Inc.
[Posted by WWW Notes gateway]
| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 487.1 | DEC 2000 Warm boot Failure. | NNTPD::"[email protected]" | Daniel Jeyachandran | Thu Apr 17 1997 22:23 | 10 |
| Any clues to the problem.
I meant Bus_probe_algorithm & not bus_mode_algorithm.
Cust says there is no such variable.
Regards.
Daniel.
[Posted by WWW Notes gateway]
|
| 487.2 | | STAR::STOCKDALE | | Fri Apr 18 1997 08:41 | 9 |
| If there is a console environment variable, BOOT_RESET, it should be
set to ON. If there isn't one or if it is already set to ON, then it
sounds like a console problem to me, not setting up the DE425 properly
on the way up.
SHOW LAN/ERROR in SDA would give a little more data (and SHOW LAN/COUNTER),
probably the driver isn't getting interrupts or some such thing.
- Dick
|